These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M8 x 150 Bag 10
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: DimethacrylateColour: GreenFixture Speed No Activator: 10 min.Fixture Speed With Activator: 5 min. Viscosity: 500 cpsGap fill: 0.25mmFlash Point: >100°CShelf Life: minimum 12 monthSpecific Gravity: 1.06.Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours.Cure Time with good % of final strength: 2 hoursTypical Breakaway Strength DIN : 40 Nm (25/55)Typical Prevailing Strength DIN : 55 Nm (45/70)Typical Breakaway ISO 10964: 26 Nm (16/36)Typical Prevailing ISO 10964: 36 Nm (22/50)Bondloc Studlock High Strength Threadlocker Size: 10ml.
These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.The TFHL5575 TechFast Hex Head Roofing Screws have the following specifications: Size: 5.5 x 70mm.Pack quantity: 50.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 25mmThread: Fully threadedPack Quantity: Box of 200
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.The kit includes an interchangeable nosepiece and a selection of 1/8, 5/32 and 3/16in rivets.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 75mm Box 100
These Forgefix heavy-duty Form A Flat Washers are thicker than the more popular Form B type washers. They are bright Zinc Plated for increased corrosion resistance and conform to DIN 125 standards. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Heavy-Duty ZP M12 Box 10
For use with Arrow T72 staple gun. The exclusive design of the gun along with the insulated staples allow safe and secure installation of all types of wiring up to 12.5 mm / 1/2inT72 Insulated Staples 5 mm X 12 mm (300)
The Rawplug Nylon Self-Drill Plasterboard Fixings require no drilling, simply pierce plaster and screw home. The nylon insulates against accidental electrical contact with a choice of panhead or countersink screws, flush fit finish. The Screw and fixture can be removed and re-used. (e.g. When decorating).Maximum Fixture Thickness: 12mmPack of 6.
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 150mm.Pack quantity: 25.
The Faithfull Self-Adhesive Draught Excluder strip is for sealing gaps around doors and windows. It stops draughts and reduces noise, providing insulation for your home. This weather-proof D Profile EPDM (Ethylene Propylene Diene M-Class rubber) foam seal is stretch resistant and self-adhesive for easy application and has a long life expectancy of 5 years. Faithfull EPDM Draught Excluder for sealing gaps from 3 to 7mm. Specifications: Colour: Brown.Size: 9mm x 7.5mm.Length: 6M (2 x 3M).
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M5 x 40mm.Drill Size. 10mm.Fixing Thickness 15mmPack Quantity. 100
The Faithfull Self-Adhesive Draught Excluder strip is for sealing gaps around doors and windows. It stops draughts and reduces noise, providing insulation for your home. This weather-proof D Profile EPDM (Ethylene Propylene Diene M-Class rubber) foam seal is stretch resistant and self-adhesive for easy application and has a long life expectancy of 5 years. Faithfull EPDM Draught Excluder for sealing gaps from 3 to 7mm. Specifications: Colour: White.Size: 9mm x 7.5mm.Length: 24M (4 x 6M).
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M12 x 50 Bag 5
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 2 x 12 Box 100
The Faithfull pack of 4 x 8mm joining links for use in conjunction with plastic chain. Available in black or white.The Faithfull FAICHPJLW plastic joining links are white and 8mm in thickness.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4.8 x 25mm.Grip range: 19-22mm.Pack: Blister of 50.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 3.5 x 25mmThread: Fully threadedPack Quantity: Box of 200
The Arrow T59 Insulated Staples are for use with the Arrow T59. Ideal for tacking bell wire, etc.Arrow T59 Insulated Staples have the following specification: Size: 8 x 8mm.Colour: Clear.Quantity: Box 300.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish 125mm Bag of 500g
These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J style fixing hooks ensures that loads are secured quickly and efficiently and provide ease of use. Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/Dan Pack quantity: 1. Manufactured in accordance to EN12195-2 NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMITThe Faithfull FAITDTRUCK52 has the following specifications:Length: 5mWidth: 50mmBreaking strain: 4,000kg/daN Maximum working load: 2000kg/daN
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 100mmEffective Thread Length: 83mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 3.2mmLength: Medium 10mmGrip range: 5-7mmPack qty: 100
Gorilla Glue 5 Min 2-Part Epoxy Syringe has an impact-tough formula and uses hybrid technology to improve overall adhesion, strength, and flexibility. It fills voids and bonds uneven and vertical surfaces and has a 5-Minute set time, allowing time for repositioning. The epoxy withstands moderate exposure to water and will not break down from exposure to common solvents. It has a Low VOC and is non-toxic once cured, safe for everyday handling. Size: 25ml.
EVERBUILD GRIPTITE is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, PVCu and certain plastics. Benefits;Solvent based formula - quick drying / high early bond strength.Excellent adhesion/bond strength - adheres to most common surfaces.Good early grab properties - usable in both vertical and horizontal positions.High solids formulation - excellent gap filling properties without shrinkage.Suitable for use where both surfaces are non-porous.Excellent external weathering properties-Suitable for exterior use Ideal for:Bonding dado rails, architraves and skirting. Fixing parquet and cork flooring.Fixing wall cladding direct to internal wall surfaces or timber battens.Fixing battens directly onto walls without fastenings.Bonding carpet gripper systems to most floors without the need for nails or tacks.Bonding stair nosing to concrete or wooden stairs.Fixing polyester, wood, PVCu or metal thresholds.Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. Limitations;Do not use on damp surfaces: use EVERBUILD GUN A NAIL.Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item. Solvents present may attack sensitive plastics. If in doubt, rest a small area first. C4: 350ml.
Silweld is the incredible new silicone self-fusing tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections. It creates an airtight, watertight seal in seconds without the need for any adhesive and it even works under water! Silweld is an excellent electrical insulator up to 8,000 volts, it withstands extreme temperatures from -65 to 260°C and even withstands pressure to 700psi. Silweld also resists petrol, oils, acids, solvents, salt water and UV rays. Silweld is so diverse that it can be used for permanent or temporary repairs to just about anything! Length: 3m.
Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Self-Drilling Stitching Hex Screws have the following specification: Size: 6.3 x 22mmClamping Thickness: 11mmHead Type: 8mm HexPack Size: 100
These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S style hooks ensures that loads are secured quickly and efficiently and provide ease of use. Length: 5m. Width: 25mm. Breaking Strain: 600kg/daN. Maximum Working Load: 300kg/daN. Manufactured in accordance to EN12195-2. NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT Pack quantity: 4.
The ForgeFix TechFast Masonry Hex Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with a power tool. These screws have an 8mm Hex head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T27 Impact Bit.Specification: Size: 6.3 x 45mmHead Type: 8mm HexPack Quantity: Box of 100
These ForgeFix traditional slotted, twin thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative applications and in applications where the screw may come in to contact with the elements avoiding corrosion. Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Raised head screws have both countersunk and raised structure, which is designed for aesthetic purposes on all types of ironmongery and lighting applications. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Raised Head ST Solid Brass 5/8 x 6 Box 200
These Forgefix General Purpose Pozi Screws with round heads are zinc plated finish for increased durability. They are versatile screws, suitable for use in and with many materials. APPLICATIONIdeal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Round headed screws have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation. These screws have twin threads to enable an easy start when driving.General Purpose Pozi Screw Round Head TT ZP 5/8 x 8 Box 200
The Faithfull plastic posts can be used in conjunction with plastic chain and bases. A simple, easy way of restricting or managing areas both inside and outside. The posts have the following dimensions: Size: 860mm high by 40mm diameter. Please note bases are sold separately.The Faithfull FAICHPOSTYB plastic post for chain has the following specifications:Colour: Black and yellow.
The Forgefix Hex Head Stitching Screws are designed specifically for joining cladding sheets together. They have a Hex head and a self-drilling point which enables speedy insertion. The rubber washer beneath the aluminium flange expands under pressure to form a permanent weather seal. The screws are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which is spray tested to 1,000 hours. They can join up to 3 sheets of 0.7mm thickness. Specifications:Size: 6.3 x 22mm.Pack quantity: 100.
These Faithfull Quick Repair Links are ideal for use where temporary but secure fastenings are required. The connection is made by the hexagon locking collar.The links are resistant to corrosion, thanks to their finish. Chain accessories should never be used for any overhead lifting, load binding or towing applications.These Faithfull Quick Repair Links have the following specification: Finish: Zinc Plated.Diameter: 3.5mm.Inside Link: 28 x 10mm.Pack of 4.
