These Master Lock ratchet tie-downs have been specially designed to secure your luggage or other loads to cars, van roof racks or trailers. The long ratchet tie downs with black Monster Weave™ webbing for durability have integrated S-Hooks with clips to aid installation. The silver protectant finish not only delivers a richer appearance, but is also 3 times more corrosion resistant than standard webbing. TUV certified. Capacity: Lashing: 400kg, Max: 800kg.Masterlock Ratchet Tie Down with S-Hooks has the following specification: Length: 4.25m.Capacity: Lashing: 400kg, Max: 800kg.Quantity: 4 Piece.
Master Lock Lashing Straps made from ultra resistant Monster Weave™ webbing with metal buckles. Convenient for a wide range of loads. They have a width of 25mm and colours may vary. TUV certified. Capacity: Lashing: 150kg, Max: 300kg.These MasterLock Lashing Straps have the following specification: Length: 2.5m.Width: 25mm.Capacity: Lashing: 150kg, Max: 300kg.Quantity: Pack of 2.
The reverse twin wire hook on these Masterlock Bungees offers twice the strength of an ordinary bungee and their rounded edges eliminate the risk of scratching. Reverse hook bends away allowing more room to attach. TUV certified.6 piece jar containing: 2 x 60cm, 2 x 80cm and 2 x 100cm bungees.
The reverse twin wire hook on these Masterlock Bungees offers twice the strength of an ordinary bungee and their rounded edges eliminate the risk of scratching. Reverse hook bends away allowing more room to attach. TUV certified.12 piece jar containing: 4 x 60cm, 4 x 80cm and 4 x 100cm bungees.
These Faithfull Welded Chains are manufactured from a mild steel with a Black Japanned finish. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.Size: 5mm x 10m. Maximum Load: 160Kg.
The Everbuild Aluminium Tape is made from heat and light reflective Aluminium Foil. It is heat resistant to 180°C and flame retardant to Class O. It has excellent moisture resistance, and is ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat. Available in 3 sizes.Everbuild Aluminium Tape. Size: 100mm x 45m.
Everbuild Aquaseal Liquid Roof is an easy-to-use, all weather roofing system which is ideal for waterproofing any flat or pitched roofs. Aquaseal Liquid Roof creates a solid, waterproof membrane that covers the entire surface area without any seams. It is a ready-to-use polyurethane based product that can be applied cold. Aquaseal Liquid Roof is ideal for use on roof areas for new projects, extensions or to refurbish an existing, leaky roof. It offers excellent adhesion to both porous and non-porous substrates. Colour: Slate GreySize: 7kg
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright 25mm Bag Weight 500g
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright 20mm Bag Weight 500g
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright Finish 30mm Bag Weight 250g
UniBond No More Nails Waterproof is ideal for both interior and exterior DIY or repair jobs, without the need for nails, screws or hassle. Constructed with hybrid polymer technology, ensuring a water-resistant and professional finish. The cartridge design ensures a simple application, allowing control of the flow of glue with the use of a cartridge gun. Suitable for most materials including wood, ceramic, metal, concrete, brick, plaster, stone and most plastics. For easy application, ensure surfaces are clean and free from dust, oil, grease and polish. Cut off the tip of the cartridge above the screw thread, screw on the nozzle and cut to the desired size. Insert cartridge into the gun. Apply adhesive to one surface of the item being bonded using a cartridge gun. Firmly press the items into place with a twisting action. Wipe away the excess and clean residues of adhesive with white spirit. Allow 24-48 hours to fully dry. Very heavy or distorted items may need support or additional fixing whilst drying. UniBond No More Nails Original ndash; Eliminates the need for nails and screws!
UniBond No More Nails Invisible eliminates the need for nails and screws. nbsp;The solvent-free mount adhesive is constructed with water-based technology, ensuring extra-strength and a professional finish. Applies white, dries translucent. Specially designed for interior use, the mounting adhesive ensures strong bonds for heavy-duty repair and DIY jobs. Ideal as a skirting board adhesive and for many other internal bonding applications including fixing coat hooks or coving. Suitable for most common building materials, e.g. wood, ceramic, metal, concrete, brick, stone, plaster and most plastics. For optimal application, ensure surfaces are clean, dry and free from dust, oil, grease and loose material. One of the surfaces must be porous as the product dries by water evaporation. Cut off the tip of the cartridge above the screw thread, screw on nozzle and cut to desired size. Insert the cartridge in to the gun. Apply the adhesive to one surface and firmly press into place with a twisting action. Remove excess adhesive immediately with water. nbsp;
The J-B Weld PlasticWeld trade; Epoxy Syringe is a specially formulated two-part adhesive and epoxy filler system which provides strong, lasting repairs. Sets in just 5 minutes. Resistant to water, chemicals and heat. Suitable for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. Specifications: Bonding Strength: 3,900 PSI.Set Time: 5 Minutes.Cure Time: 1 Hour.Colour When Dry: Translucent Yellow.Size: 25ml.
J-B Weld PlasticWeld trade; Epoxy Putty is hand-mixable and fast-setting, only 5 minutes. After mixing, it forms a polymer compound which can be moulded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Resistant to water, chemicals and heat. Perfect for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. Specifications: Bonding Strength: 3,900 PSI.Set Time: 25 Minutes.Cure Time: 3 Hours.Colour When Dry: Off White.Size: 57g.
J-B Weld PlasticBonder trade; is a quick-setting, two-part, urethane adhesive system providing strong and lasting repairs. Works on thermoset, carbon fibre composites, thermoplastics, coated metals, concrete and more. It works well as a gap filler and will fill dents and scrapes in plastic components. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 3,770 nbsp;PSI.Set Time: 15 Minutes.Functional Cure: 30 Minutes.Size: 25ml. 1 x J-B Weld PlasticBonder trade; Syringe Tan 25ml.
J-B Weld PlasticBonder trade; is a quick-setting, two-part, urethane adhesive system providing strong and lasting repairs. Works on thermoset, carbon fibre composites, thermoplastics, coated metals, concrete and more. It works well as a gap filler and will fill dents and scrapes in plastic components. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 3,770 nbsp;PSI.Set Time: 15 Minutes.Functional Cure: 30 Minutes.Size: 25ml. 1 x J-B Weld PlasticBonder trade; Syringe Black 25ml.
J-B Weld trade; Original Cold-Weld trade; Epoxy Syringe. This two-part epoxy system provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. It can withstand temperatures up to 550⁰ when fully cured. Perfect for repairing vehicle exhausts, rust damage and other automotive parts. Suitable for use on metal including aluminium, brass, copper, iron and stainless steel. Specifications: Bonding Strength: 5,020 PSI.Set Time: 4-6 Hours.Functional Cure: 15 Hours.Colour When Dry: Dark Grey.Size: 25ml.
J-B Weld Perma-Lock Blue Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. Great for: rocker arms, stud bolts, frame bolts, fasteners, bushings, loose screws and vibration sensitive items. OEM Approved, use by original equipment manufacturers to keep bolts and fastenings secure. Specifications: Temperature Resistant: up to 148 deg;C (300 deg;F).Suitable Bolt Size: 1/4in to 1in.Size: 6ml.
J-B Weld MinuteWeld trade; is a specially formulated, high-strength, two-part instant setting epoxy. MinuteWeld trade; will set under most temperature conditions in one minute. Designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal. Specifications: Bonding Strength: 2,300 PSI.Set Time: 1 Minute.Cure Time: 1 Hour.Colour When Dry: Clear.Size: 25ml.
J-B Weld KwikWeld trade; is a fast-setting version of the original J-B Weld two-part epoxy Cold-Weld trade; system which provides strong, lasting repairs to metal and multiple other surface types. Sets within minutes and cures within just a couple of hours. Resistant to water, chemicals and heat. Cures consistently, no shrinkage/foaming. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. Specifications: Bonding Strength: 2,424 PSI.Set Time: 6 Minutes.Cure Time: 4-6 Hours.Colour When Dry: Dark Grey.Size: 25ml.
J-B Weld KwikWood trade; Epoxy Putty is hand-mixable. Formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood trade; has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood trade; dries to a light tan color. Perfect for repairing dry rot, screw holes, insect damage and furniture. Specifications: Set Time: 15-25 Minutes.Cure Time: 1 Hour.Colour When Dry: Tan.Size: 57g.
J-B Weld ExtremeHeat trade; Putty is formulated to allow for repairs to iron, steel and metal in high temperature environments (1000 deg;F / 538 deg;C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces, and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs). Great for: exhaust manifolds, heat exchangers, mufflers, outdoor grills fireplaces. Specifications: Temperature Limit: 538 deg;C.Setting Time: 1 Hour.Cure Time: 24 Hours.Colour When Dry: Machine Grey.Size: 85g.
J-B Weld HighHeat trade; Epoxy Putty is specifically formulated to bond and repair materials exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures, and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. Offers exceptionally high strength in continuous 232 deg;C (450 deg;F) and up to 260 deg;C (500 deg;F) intermittent. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 800 PSI (600 PSI at 400 deg;F).Temperature Resistant: up to 232 deg;C (450 deg;F) or 260 deg;C (500 deg;F).Set Time: 1 Hour.Cure Time: 8 Hours.Colour When Dry: Machine Grey.Size: 57g.
These Forgefix extra large Clout Nails have a larger head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Extra Large Head Galvanised 30mm Bag Weight 500g
