Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 12mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 28 precision cut, high performance steel flat wire cable staples with rounded crown are designed for securing low voltage cables up to a maximum of 4.5mm in diameter. They are made from high performance strong galvanised wire with diverging points (DP), which makes leg points go in opposite directions for extra strong bonding. For use with the Rapid R28 Cable Tacker.Type: 28 (white) divergent pointsSize: 10mm leg lengthQuantity: 5 x 1000
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 32mm Box 200
These Forgefix Frame Fixings include both plug and screw with Pozi head. The plug is made from Nylon, for a longer life and durability. Its anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, thus eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material tap in the plug, insert the screw and tighten. APPLICATION:Widely used for batten, window and door frame fixing.Ensure the correct Pozi drive insert bit is used to avoid 'Cam-Out'.Frame Fixing & Plug M10 x 80 Bag 10
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: OOO.Adjustment: 9.5 - 12mm.
Rapid No.8 Brad Nails 18Ga are versatile and high-quality. These high-performance, galvanised brads are ideal for many different kinds of finishing applications such as moulding, beading or working with frames. Precision cut legs optimise material penetration.These Rapid No.8 Brad Nails have the following specification: Leg Length: 25mmGauge: 18Suitable For: R606, EN330, PBS121, PB131 & PBS151
The Rapid AC300 Spare/Replacement Li-Ion Battery Pack, specially designed for use with the Rapid BGX300 Cordless Glue Gun. The glue gun can now be used while a spare battery is charging which offers more flexibility and performance. The Rapid BGX300 Glue Gun is an innovative, cordless glue gun ideal for decoration, repair, baseboards, light frames and furniture. Specification Battery Capacity: 2.6Ah.Battery Chemistry: Li-Ion.Voltage: 7.2 Volt.
Tacwise galvanised narrow crown staples, ideal for a wide variety of 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler and other major brands in the market.Size: 18mm.Pack quantity: 1000
18G galvanised brad nails which are ideal for a wide variety of 2nd fix tasks.Suitable for Tacwise Master Nailer 181ELS, the Tacwise Master Nailer 191EL and the new/next generation Tacwise Duo 35 and Duo 50 electric nail/staple guns.
Tacwise Hot Melt Glue Sticks are made from high-quality materials and are ideal for a range of applications from arts/crafts and DIY, to plastic, glass and paperwork. The clear, fast-heating sticks are compatible with the Tacwise H4-7 Cordless Glue Gun as well as many other leading brands taking 7mm sticks. Each box contains 100 glue sticks which are supplied in a UK Royal Mail large letter sized box, making it easier to send/receive. Specification: Diameter: 7mmLength: 150mmPack Quantity: 100
Unibond Repair Tape is a clear tape with an extra strong adhesive. Perfect for securing, mounting and fixing many items in the house, garden and office. Size: 50mm x 25m.
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 50mmClamping Thickness: 30mmEffective Thread Length: 29mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 60mmThread: 36mm lengthPack Quantity: Box of 500
The Forgefix Rimless Wall Plugs can be inserted to depths below the surface of the base material. Their sprung anti-spin fins provide a two-way lock, preventing spinning and loosening from overhead applications. Due to this precise two-way expansion, the plugs are suitable for close to edge applications. Made from 100% Nylon. APPLICATION:Ideal for both lightweight and medium-duty fixing applications.Ideal for fixing wall lights, shelving and cupboards.Often used for satellite dish installation.Suitable for most types of threaded screws including multi-purpose, general purpose, coach screws etc. Not suitable for Machine Screw threads.Nylon Wall Plug Rimless M6 x 30 Bag 100
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 1 x 6 Box 200
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 45mm Bulk 1000
500 series 18 Gauge angled nails for use with:- 0733 Master Nailer, 400EL Pro,0664 Master Nailer, 500EL Pro inclined professional nailers. Angled at 26°.For use with Master Nailer 400EL Pro, 0664 Master Nailer 500EL Pro
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 14mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R34, MS840, Alu740, R54, E-TAC and ESN114.
Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25°C 1.1 g/cm²Shelf life: 12 months unopenedViscosity @ 25°C: GelSize: 20g
Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications: Resin: Mod. Dimethacrylate.Colour: Yellow. Fixture Speed No Activator: 10-15 mins.Fixture Speed With Activator: <5 mins. Viscosity: 400-800 cps.Gap fill: 0.2 mm. Flash Point: >100°C. Shelf Life: 12 month min.Specific Gravity: 1.06.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Static shear strength: 12N/mm².ISO 10123 pin/collars range: 1-16 N/mm(²).Bondloc Bearing Fit Retaining Compound. Size: 50ml.
Everbuild Gaffa Tape is a utility grade cloth tape for use in repairs in construction, industry, home and garden. Avaliable in black or silver. Size: 50mm x 45m.Everbuild Gaffa Tape Colour: Black.Size: 50mm x 45m.
The Forgefast Wafer Head Torx® Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.Forgefast Wafer Head Torx® Compatible Construction T40 Screws Size: 8 x 200mm.Pack Size: Tub of 25.Finish: Tan elementech 2000.
Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. Gorilla Glue has an open working time of 20 minutes. The glue is brown in colour, but dries a tan colour, and is totally waterproof. Gorilla Glue is incredibly strong, bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and more. Once dried the product is sandable, stainable, paintable and can also take a varnish. Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues. This glue is unaffected by extreme hot and cold and will not break down when exposed to rain and snow. The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs. Originally used as a commercial adhesive for hard-to-glue materials. Once something is glued it will not come undone - it is set to survive years after the repair.The GRGGG250 Gorilla glue comes in the following: Size: 250ml
The Faithfull Plastic Chain is available in a selection of colours, this range of polythene plastic chain is ideal for both internal and external use. Its alternately contrasting colour sections make it particularly useful when specific areas need to be clearly sectioned off. These plastic chains are supplied in 12.5m reels.The Faithfull FAICHPLW812C plastic chain is white with the following dimensions: Thickness: 8mm
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M6 x 65mm.Drill Size. 12mm.Fixing Thickness 25mmPack Quantity. 50
Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max Load: 3 Tonne.Width: 90mm.Length: 3m.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 6.Adjustment: 110 - 140mm.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Lloyds Register Approved 304 Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.Size 1Adjustment 25 - 35mmAdjustment 1 - 1.3/8in
These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M10 Bag 100
These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Penny Washer ZP M10 x 25mm Bag 10
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 5.0 x 75mm Box 100
