These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.5 x 70mm Box 100
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1 x 4 Box 200
Faithfull Gaffa Tape is extremely strong, heavy-duty and versatile cloth tape, which is easy to tear and apply. Ideally suited for packing, repairing, joining, sealing, fixing, protecting and reinforcing. Adheres to a variety of surfaces including metal, wood, concrete, glass, paper, plastic, fabric and carpet tiles.Width: 50mmLength: 50MColour: Black
Duck Tape® Colours is a range of brightly coloured and patterned tapes, which are excellent for crafting and imaginative projects. The tapes have the same quality as Original Duck Tape®, providing high-performance strength and adhesion. The tapes are waterproof too, although not suitable for total immersion in water. The tapes can be cut with scissors or torn by hand. Available in many colours and designs.This Duck Tape® Colours & Patterns comes in the following: Colour/Pattern: GoldWidth: 48mmLength: 9.1m
Faithfull Self-adhesive Draught Excluder strip for sealing gaps around doors and windows. It stops draughts and reduces noise, providing insulation for your home. This weather-proof P Profile EPDM (Ethylene Propylene Diene M-Class rubber) foam seal is stretch resistant and self-adhesive for easy application and has a long life expectancy of 5 years. Faithfull EPDM Draught Excluder for sealing gaps from 2 to 5mm. Specification: Colour: Brown.Size: 9mm x 5.5mm.Length: 6M (2 x 3M).
Plasplugs® Super Toggle Fixings with expanding wings, which spread load over a wide area. Ideal for overhead applications, especially for lathe, plaster and plasterboard. Typical applications: wall clocks, shelving units, wall cabinets, bathroom cabinets. Adjusts to grip different wall thicknesses from 10 to 15mm. Specification: Drill Size: 10mmScrew Size: No.8 (4.5mm)Pack of 20 Plasplugs® Super Toggle Fixings
Plasplugs® Solid Wall Super Grips™ are suitable for fixing into concrete and brick. They are available in 3 different sizes/colours. Yellow: Regular-duty, accepts screws No.4-8 (3-4.5mm)Red: Regular-duty, accepts screws No.6-12 (3.5-5.5mm)Brown: Heavy-duty, accepts screws No.8-14 (4.5-7mm)The yellow wall plugs are regular-duty and will accept screws No 4-8 (3-4.5mm).Drill: 5mm.Pack quantity: 100.
These Forgefix Pozidriv, round head Corrugated Roofing Screws are Zinc plated for increased corrosion resistance. They come complete with a specially designed plastic fold over cap to suit installation of corrugated roofing. The plastic cap has a large surface area to improve weather resistance. Screw size: 5.0 x 50mm (Pozi). APPLICATIONSuitable for fixing corrugated sheeting to timber sub frames. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Round heads have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 3.2mmLength: Short 6mmGrip range: 1-3mmPack qty: 1000
500 series 18 Gauge angled nails for use with:- 0733 Master Nailer, 400EL Pro,0664 Master Nailer, 500EL Pro inclined professional nailers. Angled at 26°.For use with Master Nailer 400EL Pro, 0664 Master Nailer 500EL Pro
Duck Tape® Colours is a range of brightly coloured and patterned tapes, which are excellent for crafting and imaginative projects. The tapes have the same quality as Original Duck Tape®, providing high-performance strength and adhesion. The tapes are waterproof too, although not suitable for total immersion in water. The tapes can be cut with scissors or torn by hand. Available in many colours and designs.This Duck Tape® Colours & Patterns comes in the following: Colour/Pattern: Electric BlueWidth: 48mmLength: 18.2m
These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures.Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 42mm Bulk 1000
Plasplugs popular Heavy-Duty Plasterboard Fixings used for securing medium to heavyweight items in plasterboard. Typical applications:Plasterboard fixings.Shelving units.Wooden battens.Wall lights.Small mirrors. Specifications:Drill size: 10mm.Screw size: No. 8 (4.5mm).Supplied in a pack of 25.
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M5 x 40mm.Card of 6.Drill Size. 10mmFixing Thickness 20mm
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M5 x 65mm.Trade Pack of 20.Drill Size. 10mm.Fixing Thickness 20mm
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHAL230 A link chain has the following dimensions:Thickness: 2.5mmLength: 30m
Shurtape T-REX® Waterproof Tape provides tough, waterproof adhesion under wet and dry conditions. Built with R-Flex Technology™, it can stretch up to 700% of its original length. It’s strong enough to be used for general purpose indoor or outdoor fixes that require a waterproof seal, like repairing a rip in an above-ground pool or temporarily stopping a leak in a water pipe. Or, apply it underwater and push it into cracks and rough, dirty surfaces. Formulated to withstand extreme temperatures from -56°C to 93°C, its UV-resistant formulation won’t break down under harsh sunlight. T-REX® Waterproof Tape is flexible, ferociously strong and waterproof like no other.1 x Shurtape T-REX® Waterproof Tape 50mm x 1.5m
Bostik Super Glu is effective on a large range of materials and surfaces, including china, metals, rubber, hard plastic, laminate and much more. It bonds in seconds without the need for heat or hardener and provides very strong bonds of high-tensile strength. Super Glu Easy Flow is a thin liquid glue which gives greater surface cover. It is supplied in a 5g bottle.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish 100mm Bag of 500g
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M4 x 20mm. Card of 6.Drill Size. 8mmFixing Thickness 6mm
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 5.0 x 40mm.Box quantity: 200.
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: SilverWidth: 50mm (2in)Length: 25m
Tacwise galvanised narrow crown staples, ideal for a wide variety of 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler and other major brands in the market.Size: 20mm.Pack quantity: 1000
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 60mm Box 200
The Faithfull high-quality self-adhesive polypropylene tape used for sealing and securing a wide variety of parcels and packages. Used extensively in the home, office, factory and warehouse, this flexible and versatile tape with its strong adhesive qualities can be applied to many different surfaces. Width: 48mmLength: 50mColour: Brown
16 gauge finish nails, which are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails.
Faithfull 'D' shackles, also known as chain shackles, are versatile fittings that have many uses. Ideal for fixing or joining lengths of chain or coupling hooks, often used in conjunction with rope for marine and equestrian use. Heavy-duty construction with threaded pin enclosure. Chain accessories should never be used for any overhead lifting, load binding or towing applications.These Faithfull D Shackles have the following specifications: Body ;& ;Pin size: 6mm. ;Inside Length & Width: 25 x 13mm. ;Finish: Stainless Steel.Quantity: 2.
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 3/4 x 4 Box 200
These Forgefix Hinged Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most type of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.Hinged Cover Cap Black No.10-12 Bag 100
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 3.5 x 40mm.Box quantity: 200.
Everbuild Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture. Chloride Free. Areas of Use- Mortars (not metal reinforced)- Floor screeds- External/Internal cement based rendering- Concrete (not structural)- Suitable for use as an emergency repair plugging aid when mixed neat
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 6mm leg length.Quantity: 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 8mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 14mm leg length.Quantity: 5,000. Flat wire staples have a larger holding area against the material, making it ideal for thin plastic or insulation.
