Unibond Duct Tape is a multi-purpose, heavy-duty, fabric reinforced tape. It uses a high strength adhesive for a long-lasting hold. The tape is water-resistant and ideal for binding, repairing and reinforcing. It adheres to multi-surfaces. This heavy-duty adhesive tape has hundreds of uses around the home, car and garden and is suitable for both interior and exterior use. No need for scissors as the tape can be easily torn by hand.Size: 50mm x 25m. Colour: Black.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG100MM tape has the following dimensions:Length: 10m. Width: 100mm.
Do you have problem steps, decking areas or pathways around the house where people can lose their footing? Areas like these can be particularly dangerous for the elderly, disabled or children, leading to serious injuries in some cases, if no action is taken. Self-adhesive, easily applied, can be used indoors or outdoors.Quick and cost effective.Can be applied to a multitude of surfaces.Available in black/yellow or clear. RECOMMENDED USES: Steps, patios, garage floors, decking areas, emergency staircases, apartment staircases and access ramps.Size 50mm x 18mColour: Black.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG300MM tape has the following dimensions:Length: 10m. Width: 300mm.
Everbuild Smart Tack is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time-saving application benefits. Supplied in a standard aerosol can for smaller jobs and tricky areas such as edging, mitred joints etc. Offers the benefits of the smart tack system with lower pressure application. Based on new technology resins, providing very fine strands of 'high solids' adhesive that forms a web type pattern on application. Can be used for a multitude of uses in the shopfitting, furniture manufacture, laminating, joinery and exhibition industries. Size: 500ml.
The ForgeFix Tool Clips can be used in a wide variety of applications to store and display various items including tools, brooms, rakes, rods, pipes etc. They have a bright zinc plated finish.1 x Bag of 25 ForgeFix Tool Clips 3/4in Zinc Plated
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 3/4 x 7 Box 200
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 65mm Bag Weight 500g
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 60 Bag 10
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 25mmThread: Fully threadedPack Quantity: Box of 1000
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1/2 x 4 Box 200
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.3/4 x 12 Box 200
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright Finish 20mm Bag Weight 250g
These ForgeFix Multipurpose Galvanised Clout Nails are suitable for use with both softwood and hardwood. They have a slightly larger head that distributes the load directly underneath the top of the nail. Thin sheeting will stay firm and secure. They have a galvanised finish, which results in increased durability. Used in many joinery, construction and roofing applications.These ForgeFix Multipurpose Clout Nails have the following specification: Size: 40mmGauge: 2.65mmFinish: GalvanisedBag Weight: 2.5kg
Masterplug Metal Clad Switched Socket manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation. Two Earth terminals. Suitable for everyday use in a garage, shed, commercial and industrial environments.1 x Masterplug Metal Clad Switched Socket 2-Gang 13A
Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time. Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.Size: 125g.
A general purpose one-part contact adhesive suitable for bonding laminates, wallboards, plywood and hardboard panels, and leather goods. It has a high initial grab that bonds on contact, a high shear strength and good temperature resistance with an excellent final bond strength with low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, and Glass(Not suitable for use on polystyrene or cellulose painted surfaces).Size . 2.5 litre tin.
For use in 0327 Master Nailer 191EL Pro, 0192 Master Nailer 181ELS Pro, 0328 Hobby 53EL, 516857 Pro 140EL, 0756 Master Nailer Ranger 40 Duo Pro Pack, 0758 Master Nailer Ranger 40 Duo Trademans Pack.
J-B Weld Perma-Lock Blue Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. Great for: rocker arms, stud bolts, frame bolts, fasteners, bushings, loose screws and vibration sensitive items. OEM Approved, use by original equipment manufacturers to keep bolts and fastenings secure. Specifications: Temperature Resistant: up to 148 deg;C (300 deg;F).Suitable Bolt Size: 1/4in to 1in.Size: 6ml.
J-B Weld MarineWeld trade; is a specially formulated two-part Cold-Weld trade; adhesive system which provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fibreglass, and others. Sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters rsquo; surface. It's also resistant to petroleum, chemical and acid. Specifications: Bonding Strength: 3,960 PSI.Set Time: 4-6 Hours.Cure Time: 15-24 Hours.Colour When Dry: Dark Grey.Size: 2 x 30ml.
J-B Weld SuperWeld is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just 10 seconds. It works on multiple and hard to bond surfaces, including hard plastic, metal, glass and wood. The formula and tip applicator allow for precise control with no running.Sets in just 10 seconds allowing delicate awkward repairs to be easily completed. Its exceptionally high strength provides a permanent repair to almost anything. Ideal to use with steel, rubber, plastics and wood. Specifications:Strength: 3500 PSISet Time: 10 SecondsCure Time: 24 HoursColour When Dry: Clear
The Uni-Com Compact Segment Timer will automatically switch household appliances on and off at chosen preset times. Simply click down segments to set on/off times (one segment = 15 minutes). Makes your home more energy-efficient, saving £££s. It also helps to increase home security by automatically operating lamps to make your home look occupied when you are out. Specification: Voltage: 230V 50HzRating: 13 amp (3kW)Size (HxWxD): 76 x 78 x 51mm
Everbuild 101 Multi-Purpose Linseed Oil Putty is a hand applied setting glazing compound for sealing glass into metal and wooden frames. Benefits: - Easier to apply than most competitive putties.- Extended shelf life.- For wood and metal frames.- Added plasticiser improves adhesion and helps prevent cracking.- Single glazing of pretreated wooden and metal rebates. Limitations: - Unsuitable for plastic frames, heat absorbing glass, double glazing or frames treated with decorative microporous stains.- Always mix contents of pack thoroughly to blend in any surface oil.- Do not overpaint until a surface skin has formed (minimum 7 days, maximum 30 days).This Everbuild 101 Multi-Purpose Linseed Oil Putty comes in: Colour: NaturalSize: 1kg
STICK2® All-Purpose Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally* for bonding decorative laminates, all types of wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. All tins are fully printed. This product has excellent adhesion and will stick to most common surfaces.*Excluding 5L size which is for internal use onlyThis Everbuild STICK2® All-Purpose Contact Adhesive has exceptional bond strength and will outperform conventional wood glues in its class. EVBCON750 is suitable for internal and external use, with excellent weathering and ageing properties. 750ml
These Forgefix Lost Head Nails are used for decorative type applications, as the head virtually disappears when punched below the timber surface. The nails help to reduce timber deformation. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used in many decorative installations, such as door frame moulding or architraves.Lost Head Nail Bright 65mm Bag Weight 2.5kg
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 100mm.Pack quantity: 50.
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 50mm Box 1000
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 120 Bag 10
Gorilla Super Glue Micro Precise keeps holding strong, even when the bond takes a hit. Just hold in place for 10-45 seconds whilst the formula sets, no clamping necessary. It has an anti-clog cap that provides precise application exactly where you need it. Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more.
These Forgefix Pozidriv Machine Screws are designed for use with nuts or pre-tapped holes. They are Zinc plated for increased corrosion resistance. Their Pan Head with a flat under head surface makes the screws ideal to lay flat on sheet material of all types, thus reducing deformation. APPLICATION:Ideal for use in many DIY, ironmongery, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. A Machine screw is generally a smaller fastener, threaded the entire length of its shank that usually has a recessed drive type (Slotted, Phillips, etc.).Machine Screw Pozi Pan Head ZP M3 x 20 Bag 25
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 6.0 x 50mm.Box quantity: 100.
The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.
