Toupret® Ready to Use Patch & Repair filler is suitable for gaps, cracks, scratches and holes. Easy to sand, with minimal shrinkage and no need to spot prime. Won't flash or grin. Suitable for interior use, manual applications. It can be applied to any substrates either unpainted or painted: - Gypsum plaster, plasterboard- Old painted surfaces- Cement, concrete, cellular concrete, breeze blocks, bricks and stone Ready to Use Patch & Repair can be overcoated with any filler, all types of paints and wall coverings. Specification: Application Thickness: up to 1cmColour: White
TOUPRET Quick Fill is fast drying and provides a one-coat fill with no shrinkage. It's very easy to sand and ready to paint from 30 minutes after application. There's no need to spot prime before painting because it won't flash or grin. Suitable for internal use and ideal for repairs on walls and ceilings. It can be used on new or renovated substrates, either unpainted or painted: gypsum plaster, plasterboard, primed wood, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks and stone.
TOUPRET Quick Fill is a ready-to-use, lightweight filler that offers a one-coat fill with no shrinkage and can be painted over in 1 hour. It is rich in resin for added strength and suitable for exterior use. It can be used on unpainted or painted surfaces: gypsum plaster, cement, concrete, cellular concrete, breeze blocks, bricks and stone. Overcoat with all types of water-based masonry or conventional paints. If using polyurethane or epoxy solvent-based paints, first prime with water-based exterior paint.
Part of the Stanley Tools Transmodule System, a modular mechanics storage system ideal for the workshop. Designed to use with compatible Transmodule system storage cabinets. All the sockets feature Maxi Drive, that helps reduce fastener rounding and are made from Chrome Vanadium Steel. The bit sockets are made from S2 steel, HRC 60 ±2 with a 20% higher torque than CrV. The extensions are also made from Chrome-Vanadium steel with a full polished finish. The ratchet features a socket safety lock and a reverse lever with rotation direction displayed. Made from Chrome-Vanadium steel and fitted with a chemical resistant, ergonomic bi-material handle and quick release button. Contains the following: 13 x Standard Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 & 14mm. 12 x Deep Sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 & 14mm. 3 x Slotted Bit Sockets: 4, 5.5 & 7mm. 3 x Pozidriv Bit Sockets: PZ1, PZ2 & PZ3. 3 x Phillips Bit Sockets: PH1, PH2 & PH3. 6 x Hex Bit Sockets: 2, 2.5, 3, 4, 5 & 6mm. 8 x Torx Bit Sockets: T6, T7, T8, T9, T10, T15, T20, T25. 6 x Torx Sockets: E4, E5, E6, E7, E8, E10. 2 x Extension Bars: 50 & 100mm. 1 x Universal Joint. 1 x Quick Release Ratchet. 1 x Sliding Tee. 1 x Driver Handle. 1 x NP9 Pear Headed Ratchet.
The STANLEY FATMAX® XTREME™ Box Beam Level has been designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables the ability to draw or scribe uninterrupted lines along the full length of the level. Whilst its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m. Fully secured vial technology is designed to protect the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.
1 x STANLEY® FATMAX® XTREME™ Box Beam Level 60cm
TOUPRET Fine Surface Filler offers an exceptionally smooth finish that helps to enhance the appearance of paint finishes. No need to sand or spot prime. Supplied ready-to-use for interior surfaces. It can be used on new or renovated substrates, either unpainted or painted: gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks and stone. Ready to overpaint in 8 hours.1 x TOUPRET Fine Surface Filler 1.5kg
TOUPRET Quick Dry Filler for interior surfaces can be overcoated in 3 hours with any conventional paint or wallpaper. It can be filled to any depth without shrinking and offers exceptional adhesion with excellent shaping qualities. Easy to sand and it won't flash or grin, so there's no need to spot prime. It can be used on new or renovated substrates, either unpainted or painted: gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks and stone. Do not overcoat with polyurethane or solvent-based epoxy paints.1 x TOUPRET Quick Dry Filler 2kg
The MaxSteel heavy-duty bench vice is made from cast iron for strength and durability. The base bolts directly to the workbench surface for stability, and swivels and locks for versatility. Roll-formed screw threads ensure smooth operation and durability. Chrome plated hardware resists corrosion.Size: 125mm (5 in).
The UNION B-1K21 C-Series Cruiser Padlock is a tough padlock for use in security applications. Formerly known as the Chubb Cruiser, these locks are still made in the UK to exacting standards. 5-lever mechanism, non-key retaining. Anti saw, anti pick, force and torque attack resistant. Dimensions (H/W/D): 98.5 x 74 x 27mm.Shackle Diameter: 12.5mm.Shackle Clearance: 17mm.
TOUPRET Wood Filler is ready-to-use and can be stained or painted with any type of conventional paint, varnish or stain after 24 hours. It can also be drilled and is easy to sand. Having a low odour, it is suitable for both internal and external use. It can be used on all types of wood, including exotic species, chipboard and plywood.1 x TOUPRET Wood Filler 330g
Stanley Club Hammer with a fibreglass core for greater strength and longer durability. The shaft is covered by an ergonomic, anti-slip, bi-material handle. It has a drop forged alloy steel head with polished faces and chamfered edges. The head and handle have a reinforced connection, held by a 2-component epoxy resin adhesive.1 x Stanley Fibreglass Club Hammer 1.25kg (2.3/4lb)
The Multi-Sharp® Chainsaw Sharpening Kit restores a sharp new cutting edge to the cutters of a chainsaw, without having to remove the chain. The kit includes a depth gauge and a flat file to maintain the right cutter-to-depth guide height, which is essential for correct chain saw operation. The sharpener/file is 4.0mm (5/32in) in size for chainsaws with a pitch of 1/4in, and also 3/8in mini/low profile. This size fits most domestic chainsaws. Suitable for the following makes: Black & Decker, Bosch, Champion, Husqvarna, McCulloch, Partner, Makita, Mountfield, Hitachi, Performance Power, Poulain, Remington, Ryobi, Sovereign, Stihl and most other makes of the above chain pitch. Specifications:Size: 4.0mm (5/32in).Pitch: 1/4 or 3/8in.
The Multi-Sharp® MS1801 Garden Tool Sharpening Kit contains 3 of the most popular sharpening tools, giving the gardener all they need to accurately sharpen all their tools. Keeps tools in top condition for years, saving money. 1 x MS1601 Secateur / Pruner & Lopper Sharpener with a long-lasting silicon carbide abrasive, that puts back the precision sharp edge on all types of secateurs, pruners and loppers (both anvil and bypass) and pruning knives. Accurately regrinds the correct cutting angle. Recommended by the Royal National Rose Society. 1 x MS1401 Shear & Scissor Sharpener, will sharpen all types of shears: regular, long-handles, single cutting edge, stainless steel. It also sharpens household scissors. The tungsten carbide sharpening block regrinds both blades at the same time to the correct angle. It has an extremely long life. Recommended BEST BUY by Which? 1 x MS1301 Rotary Mower / Garden Tool Sharpener, resharpens rotary mower blades in minutes, without removing the blade from the mower. The corundum grinding wheel provides faster sharpening. Wheel is reversible to double its life. Also restores the working edge back on spades, hoes and lawn edgers. Fits any power drill.
1 x ITL Insulated 3/8in Drive Extension 75mm (3in). The ITL Insulated 3/8in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 75mm (3in)
The Multi-Sharp® Cylinder Mower Sharpener accurately re-grinds sharp new cutting edges on the cylinder blades of most cylinder mowers, whether hand, electric, battery or petrol operated. Including: Alko, Bosch, Einhell, Gardena, Ginge, Brill, G-Tech, Handy, Husqvarna, Powerbase, Qualcast and the majority of other makes (except Webb). Attaches to the fixed bottom plate of the mower (every cylinder mower has one) while sharpening. It works on the same principle as professional sharpening-radial grinding. Replacement abrasives are available for keeping the mower blades sharp, year after year. The product is recommended in the best selling Expert series: 'The Lawn Expert' by Dr Hessayon.The Multi-Sharp® ATT1101 Cylinder Mower Sharpener has the following dimensions:Blade width: 30cm / 12 inch
The McAlpine FGTR118TOP-50 Conversion Kit is a plumbing component designed to convert any TSG50 or TSG52 gully into a sheet flooring gully. This kit includes a CP brass clamp ring, a stainless steel grated cover plate, and a dip tube.
The clamp ring is designed to securely hold the grated cover plate in place, while the dip tube helps to ensure proper drainage. The grated cover plate is made from high-quality stainless steel, which is durable and resistant to corrosion.
The McAlpine FGTR118TOP-50 Conversion Kit is easy to install and can be used in a variety of plumbing systems, including those for waste water and drainage. It is designed to meet industry standards for performance and durability, ensuring reliable performance for years to come.
Overall, the McAlpine FGTR118TOP-50 Conversion Kit is a practical solution for converting a TSG50 or TSG52 gully into a sheet flooring gully. Its high-quality components and durable construction make it a popular choice among plumbers and DIY enthusiasts.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine S25 BSP Coupling is a plumbing component used to connect ABS or PVC pipes in a plumbing system. The coupling is designed to meet the requirements of BS EN 1329-1:2000 and is suitable for use with both ABS and PVC pipes.
The S25 coupling is part of the McAlpine range of plumbing fittings, which is designed to provide a reliable and cost-effective solution for a range of plumbing applications. The coupling is made from high-quality materials, ensuring durability and long-lasting performance.
The BSP coupling design allows for easy installation and a secure connection between pipes. It is suitable for use in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its ease of use and reliability.
Overall, the McAlpine S25 BSP Coupling to BS EN 1329-1:2000 ABS or PVC pipe is a reliable and versatile solution for connecting pipes in a plumbing system. It is widely used in a range of applications and is a popular choice among professionals and DIY enthusiasts alike.
・ Available in 1¼" and 1½" sizes
・ Must be solvent welded
The McAlpine 42G-CB is a compression straight connector made from chrome-plated brass. It is similar to the McAlpine 35G-CB, but has a larger diameter to accommodate larger pipes or fittings. The compression fitting uses a compression nut and olive to create a watertight seal between the connector and the pipe or fitting.
Like the 35G-CB, the chrome plating on the brass provides a durable and attractive finish that resists corrosion and tarnishing, making it suitable for use in a range of different environments. This type of connector is commonly used in plumbing and heating applications where a strong, reliable connection is required.
Overall, the McAlpine 42G-CB Chrome Plated Brass Compression Straight Connector is a high-quality, reliable fitting that is well-suited to a variety of plumbing and heating applications where larger diameter pipes or fittings are required.
・ Available in 32mm (Euro), 1¼" and 1½" sizes
・ Sleek chrome compression nuts match Chrome Plated Brass trap nuts
The McAlpine BOSS82CAST-BL is a mechanical two-piece cast iron soil pipe boss connector that is designed to connect a waste pipe into a vertical soil stack or a horizontal drain pipe. The connector is black in color and has a drill size of 22mm, which means that you will need a 22mm drill bit to make the necessary hole in the pipe.
The McAlpine BOSS82CAST-BL is supplied with a fixing tool that makes installation easier. The fixing tool is used to tighten the two-piece connector around the waste pipe and create a secure connection. The connector also features a rubber seal that provides a watertight and airtight seal between the waste pipe and the soil stack or drain pipe.
This type of connector is commonly used in plumbing installations, particularly in situations where it is not practical to connect the waste pipe directly into the soil stack or drain pipe. The McAlpine BOSS82CAST-BL is a high-quality product that is designed to last and provide a reliable connection for many years.
・ Available to suit 4'/110mm, 3½"/90mm and 3"/82mm soil pipe
・ Available for 1¼" and 1½" waste pipe size
・ For cast iron soil pipe
・ Suitable for condensate discharge only
・ Simple dry fixing mechanical connection
BULLDOZER Telescopic Heavy-duty Broom with stiff dual PET bristles. Designed for sweeping up heavy debris in both wet and dry conditions. Its heavy-duty plastic head is durable and hardwearing, this helps protect against all outside elements.A telescopic handle allows you to set the broom to a comfortable height and enables easier transport and storage. Fitted with a cushioned neoprene grip that provides additional comfort whilst sweeping. A heavy-duty dual lock bracket provides additional stability when in use.BULLDOZER brushes are engineered to tackle the toughest cleaning jobs, making them an essential addition to your kit. Whether you’re dealing with stubborn dirt or dead leaves, our heavy-duty brooms are designed to deliver outstanding performance.Specification:Handle Length: Approx 73-126cm
1 x BULLDOZER Telescopic Heavy-duty Broom 355mm (14in).
Bahco Pipe Slices are automatic tube cutters that fit directly over the pipe and cuts with a simple twist. They are compact in size, making them ideal for work in confined spaces. With orange painted zinc body.Size 15mm.
The McAlpine Matt Black Brass Shower Trap Cover is designed to enhance the aesthetic of your bathroom while providing reliable drainage. This stylish cover is perfect for modern interiors.
High-Quality Brass Construction for Durability
Elegant Matt Black Finish for a Contemporary Look
Easy to Install with Included Support
Compatible with Standard Shower Drain Systems
Ideal for Renovations and New Installations
The McAlpine Rubber Waste Washer RWW11 is a component used in plumbing systems to create a watertight seal between a waste outlet and the waste pipe. The washer is designed to fit around the waste outlet, providing a cushioning effect and preventing leaks by creating a tight seal between the outlet and the pipe.
The RWW11 Rubber Waste Washer is made from high-quality rubber, which is flexible and durable, making it resistant to wear and tear, as well as exposure to water and other chemicals found in plumbing systems. The washer is designed to fit a waste outlet with a diameter of 70mm and a waste pipe with a diameter of 50mm. The thickness of the washer is 4.0mm.
One of the key features of the McAlpine RWW11 Rubber Waste Washer is its ease of installation. The washer can be easily installed by a professional plumber or DIY homeowner with basic tools and some plumbing knowledge. The washer is simply placed around the waste outlet and pushed into the waste pipe, creating a tight seal between the two components.
Overall, the McAlpine RWW11 Rubber Waste Washer is a reliable and effective component for creating a watertight seal between a waste outlet and waste pipe in plumbing systems. Its high-quality rubber construction, along with its ease of installation, make it a popular choice for both professionals and DIY homeowners.
The McAlpine 2" Multifit Loose Nut Z8M is a plumbing fitting used for connecting different types of pipes together. It is made by McAlpine, a UK-based company that specializes in plumbing products.
The Multifit Loose Nut Z8M is designed to be used with a range of different pipe materials including PVC, copper, and iron. The fitting has a 2-inch diameter and is made of high-quality materials, ensuring durability and reliability.
The loose nut design allows for easy installation and removal, making it a convenient option for plumbing professionals and DIY enthusiasts. It can be used in a variety of applications, such as in industrial, commercial, or residential plumbing systems.
The Z8M refers to the specific model number of this particular fitting. It is part of McAlpine's Multifit range, which is designed to provide a flexible and adaptable solution for connecting pipes of different materials and sizes.
Overall, the McAlpine 2" Multifit Loose Nut Z8M is a versatile and reliable plumbing fitting that can be used to ensure leak-free connections in your pipework installations.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine 50mm Seal AntiSyph Bath Trap Flex Oflow is designed to effectively prevent backflow in your bath installations. This reliable trap ensures a smooth drainage experience while maintaining hygiene.
High-Quality Construction: Made from durable materials for long-lasting use.
Effective Backflow Prevention: Designed to stop unwanted backflow, ensuring a clean and safe bath environment.
Easy Installation: Flexible design allows for straightforward installation in various setups.
Compatible with Standard Baths: Fits most standard bath configurations for convenience.
Reliable Performance: Engineered to provide consistent drainage without blockages.
The McAlpine R/SEAL-42X35 is a synthetic rubber seal reducer designed for use with chrome plated brass waste fittings. It is designed to provide a watertight seal between waste pipes or fittings of different sizes. The R/SEAL-42X35 is specifically designed to reduce the size of the waste pipe or fitting from 42mm to 35mm.
This type of synthetic rubber seal is commonly used in plumbing and waste applications where a reliable and watertight seal is required. The R/SEAL-42X35 is designed to be used with McAlpine waste fittings and is compatible with a wide range of different pipes and fittings.
Overall, the McAlpine R/SEAL-42X35 Synthetic Rubber Seal Reducer is a high-quality, reliable fitting that is well-suited to a variety of plumbing and waste applications where the reduction of the waste pipe or fitting size is necessary for a secure and watertight connection.
・ Available in 3 sizes
・ Use with McAlpine Chrome Plated Brass Waste Pipe and Fittings
Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.Millimetre Reading Gauges with Straight leaves 12.7 x 77mmNo. of leaves: 13 Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4.8 x 18mm.Grip range: 12-14mm.Pack: Blister of 50.
The Thor Thorex Nylon Hammer for impact with a clean finish. Its Chrome-plated Zinc head (except THO720) is durable and corrosion-resistant, this head adds weight and strength while maintaining a clean, polished look.Engineered for balance and durability. All have two white durable nylon faces except THO710R and THO712R which have one white nylon and one soft grey face.The durable nylon faces can be replaced to upgrade or extend the life of your hammer. The white is made from impact-resistant Nylon 6/6 (Shore D57-61) for long-lasting performance, the ultimate versatile choice for both light and heavy-duty assembly work. Made from the grey soft PVC (Shore A63-73) that protects delicate surfaces for mark-free strikes.Fitted with a durable anti-vibration, wooden handle. Crafted from high-quality hardwood, it minimises recoil for enhanced comfort and control. Recommended for general maintenance, assembly work and frame construction, where force is needed without compromising surface integrity.
1 x Thor 714N Thorex Nylon Hammer 44mm 760g
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 6. Weight 680g (1 1/2 lb).Diameter 70 mm (2 3/4 in).
Thor super plastic mallets fiitted with strong wood handle and ultra-high molecular weight Polythene head, this will provide high impact, durability and high abrasive resistance, well as resistant to corrosion to most chemicals, these mallets will not fracture, splinter or delaminate. Also these Thor mallets are use in the jewellery industry, steel rule die assembly, the furniture industry and sheet metal working.Weight 480g (1lb).Diameter 60 mm (2 3/8 in).
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 4.Weight 1900g (4 1/2lb).Diameter 50mm (2 in).
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 2.Weight 790g (1 3/4lb).Diameter 38mm (1 1/2 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 5 Thor split head hammers.Face diameter 63mm (2 1/2in)
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 1.Diameter: 32mm (1 1/4 in).Weight 690g (1 1/2 lb).
