JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 ¡C)Pack of 10
JG Speedfit x union nut flexi hose with service valve (white PVC) for the connection to a male thread appliance, such as a tap. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using an easy to operate integrated handle.
Simply push the JG Speedfit x union nut flexi hose with service valve (white PVC) fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
A male BSP to Pushfit straight adaptor from the John Guest PM range. This connector is manufactured using non-toxic acetal copolymer, meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61 and SK Zert. They are commonly used in food/beverage, pneumatic systems and water purification. Quick and convenient assembly and can be assembled and disassembled repeatedly
Pack of 10
JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable female thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The Thor Thorex Nylon Hammer for impact with a clean finish. Its Chrome-plated Zinc head (except THO720) is durable and corrosion-resistant, this head adds weight and strength while maintaining a clean, polished look.Engineered for balance and durability. All have two white durable nylon faces except THO710R and THO712R which have one white nylon and one soft grey face.The durable nylon faces can be replaced to upgrade or extend the life of your hammer. The white is made from impact-resistant Nylon 6/6 (Shore D57-61) for long-lasting performance, the ultimate versatile choice for both light and heavy-duty assembly work. Made from the grey soft PVC (Shore A63-73) that protects delicate surfaces for mark-free strikes.Fitted with a durable anti-vibration, wooden handle. Crafted from high-quality hardwood, it minimises recoil for enhanced comfort and control. Recommended for general maintenance, assembly work and frame construction, where force is needed without compromising surface integrity.
1 x Thor 716N Thorex Nylon Hammer 50mm 1230g
The Tacwise 53-13EL Cordless Staple/Nail Gun is powered by an interchangeable 12V lithium-ion battery, the perfect choice for the busy tradesman or enthusiastic DIYer. This cordless model is perfect for furniture upholstery and decorative work such as fastening canvas, leather, plastic sheeting, netting, frames and more. The handy belt hook provides easy storage on the move, whilst the LED light offers precise stapling/nailing. Switch seamlessly between staples and nails thanks to the bottom loading design and know when you’re running low with the useful refill window. The 53-13EL also features single shot or contact trip/bump firing modes, designed for maximum power for various staple lengths without adjustment. Supplied with: 1 x 12V Battery, 1 x Charger, 200 x 53/8mm Staples, 200 x 13/6mm Staples and 1 x Handy Neoprene Storage Bag. Backed by a 2-year guarantee when using Tacwise staples and nails. Specification Fires: 53 & 13 Staples: 6-12mm, 180/18g Brads: 10mmWeight: 0.9kg
Evo-Stik white Tile A Wall Fast Set Grout For Ceramic Tiles is a cement-based powder grouting material, suitable for finishing joints of internal and external ceramic tile installations. When set, Evo-Stik Tile A Wall Fast Set Grout For Ceramic Tiles is completely water-resistant and will not wash out of joints. It is recommended for joints up to about 3 mm wide. Suitable for ceramics, mosaics and natural stone walls, ideal for interior uses including kitchens, bathrooms and showers, it is easy to mix with water and sets to leave a professional finish that is resistant to mould growth. 1kg of powder, when mixed, will grout approximately 5m². Coverage is dependent on the nature of the substrate, the adhesive bed thickness and the type of tile.
The Makita DUN500W LXT Pole Hedge Trimmer has a durable brushless motor with constant speed control and three speed settings (Hi/Med/Low). Its Automatic Off function means the tool automatically turns off if not operated for 60 seconds after being turned on. For added safety, there is an electric brake.The blade features triple-edged cutting teeth designed to easily catch and firmly hold branches. Curved blades reduce friction resistance to suppress energy loss. This low resistance increases battery run time.Its lightweight design features a two-handed grip and is foldable for easy transport and storage. The adjustable head can be rotated through 6 angle settings, up to 115°. It also tilts up to 45° and down to 70° from the horizontal position.Specifications:Strokes at No Load: 2,000/3,600/4,400/min.Blade Length: 50cmMax. Branch Diameter: 23.5mmOverall Length: 211.5cm
The Makita DUN500WZ Brushless LXT Pole Hedge Trimmer comes as a bare unit.
The DEWALT DCR011-XJ 10.8V / 18V / 54V Bluetooth® Speaker produces high-fidelity audio out of the high-quality speakers. The bass port maximises bass and range, and the Bluetooth® carries a range of up to 30m. You can stream audio from a mobile or plug-in directly with an aux cable. The carry handle and hang system, along with an over moulded side bumper and a metal speaker grill, gives the DCR011-XJ Bluetooth® Speaker portability and durability for transport and use on the site. The DCR011-XJ is compatible with DEWALT's full range of 10.8V, 18V and 54V batteries and is the perfect speaker for any site, job or tradesman. Bare Unit, No Battery Supplied.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 0.30 mm.Working length: 3mm.Overall length: 19mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 5/64in.Working length: 24mm.Overall length: 49mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 3.0mmWorking length: 33mm.Overall length: 61mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 8.20mm.Working length: 75mm.Overall length: 117mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A110 Imperial Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to DIN 340RN/BS328/ISO 494 standards.Tip diameter: 5/32in. Working length: 78mm.Overall length: 119mm.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 200mm.Width. 24-27mm.Min/Max Bore: 16/50mm.Wire Gauge. 0.30/0.35.Wire Type. Steel Crimped.Max R.P.M. 4,500.
Ronseal Peel Stick Everywhere Paint Swatch. Test paint colours around your home without damaging your walls. Produced using real paint. 1 x Ronseal Peel Stick Everywhere Soft Sand.
Cuprinol Ultimate Garden Wood Preserver has a superior, water-based formulation that works in 3 ways. Its UV filters give long lasting colour for up to 5 years, added waxes and resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain. Ultimate Garden Wood Preserver can be used on all types of rough or planed wood such as sheds, fences, summer houses, gates and arbours. Drying time: 2-6 hours.The Cuprinol CUPGWPREAB1L Ultimate Garden Wood Preserver has the following specifications:Colour: Autumn Brown.Size: 1 litre.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
The DEWALT TSTAK™ IP54 Job Chest provides storage for a large amount of power tools and hand tools. Both of its lids are fitted with IP54 seals, one on the large lid and one on the quick-access lid, helps to prevent water and dust ingress. The quick access half lid allows access to tools in the main compartment, without removing stacked TSTAK™ modules. Anti-rust metal latches and hinges provide increased durability.Durable side latches allow you to connect multiple TSTAK™ modules on top. TSTAK™ boxes can be stacked on the lid side by side, facing both directions, to create a convenient workstation and provide maximum accessibility and safety.For security, both the main job chest and quick access lid feature a padlock eye, the padlock is sold separately. The chest is easy to move, thanks to its durable wheels and heavy-duty pull out handle. Specification: Max. Load Capacity: 50kg.
Super stylish this stainless-steel microwave features a 20ltr capacity, 800W power, defrost and pre-set menu functions plus 5 power levels for controlled heating. The digital controls and pull door operation mean it's super easy to use and it also has a 95-minute timer and a child lock function for added safety. A perfect addition for any kitchen, the mirror glass door and stylish steel accents will add a touch of class to any kitchen
_STYLISH SIMPLICITY È Modern and practical, it is time for an upgrade. The sleek stainless steel microwave with its sleek lines, mirror glass door and elegant steel accents will add a touch of class to any kitchen
_BRITISH INSPIRED È Since 1958, Haden have been the pioneers of coloured microwaves, toaster and kettles, inspired by the British countryside. Our microwaves are made to last with the quality that you have trusted for generation
_FUNCTIONALLY ELEGANT È This 20 litre microwave is packed full of features. Equipped with digital controls and pull door operation mean it's super easy to use. It also features a weight defrost, solo function and a child lock for safety
_PRE-SET FUNCTIONS È The microwave features 800W power, defrost and pre-set menu functions plus five power levels for controlled heating. With eight auto cooking programs and 95 minute timer, you have all the functionality you need and more!
_BUILT TO LAST È The stylish microwave has a stainless steel exterior with chromed accents as well as a mirror glass door. The sturdy microwave can be cleaned by removing the glass turntable and wiping it down
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940638 Impact Socket has the following specifications: Length: 95mm.Size: 38mm.
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 9mm
This Scan Safety sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA0158 safety sign has the following specifications:Size: 200 x 300mmMessage: 'No entry'.
Contains: 2 x Medium Clear Hooks (hold up to 900g per hook)4 x Medium Clear Strips Command™ Clear Hooks provide an innovative solution for hanging decorations, calendars and other lightweight objects. 3M stretch-release technology provides a strong hold and removes cleanly. They’re easy to apply and remove - leaving no holes, marks or sticky residue. Clear hooks and strips blend in, making them suitable for any room in the house or office. Rehanging them is as easy as applying a Command™ Clear Refill Strip, so you can take down, move and reuse them again and again. Suitable for a wide variety of surfaces; solid, hollow and painted walls, as well as other materials including wood, tiles and metal.
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340519 Hex 3/4 inch drive socket has the following specifications:Size: 19mm. Length: 50mm.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940627 Impact Socket has the following specifications: Length: 95mm.Size: 27mm.
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 22mmLength: 78mm
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm
