The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.
These Forgefix Single Openlock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems. They are effective with temperatures of up to 100°C (most pipes in domestic central heating systems operate at around 70°C). APPLICATIONUsed when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.Pipe Clip Single Openlock 22mm Box 100
These Forgefix Rimmed Expansion Wall Plugs are made from 100% Nylon. They rest on the surface of the base material and are particularly useful when the depth of the base material is not known. Sprung anti-spin fins provide a two-way lock, preventing spinning and loosening from overhead applications.Due to the precise two-way expansion, the plugs are suitable for close to edge applications. APPLICATION:Ideal for both lightweight and medium-duty fixing applications. Often used for satellite dish installation.Suitable for all types of threaded screws, including multi-purpose, general purpose, coach screws etc. Not suitable for machine screw threads.Nylon Wall Plug Rimmed M6 x 30 Bag 100
The Starrett A5 extension will accomodate A2, A17-12 and XA2 arbors. A15 fits A1, A10 and A17-38 arbors.Starrett A15 12in Extension Bar suitable for use with A1, A10 Arbors, A17-38, XA1 and XA10.
The Yale 1109 series replacement rim cylinders are for use with surface mounted locks, such as nightlatches, operating from a tailbar. They are used to provide key access from one side of a door and are suitable for doors 38mm to 57mm in thickness. The tailbar can be cut to suit the thickness of the door.This Yale P1109SC Replacement Rim Cylinder comes in Satin Chrome Keyblank No.8 Supplied with two keysRim Finish: Satin Chrome Pack: Visi Pack
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 6.0 x 70mm Box 100
Everbuild One Strike is a revolutionary ready-mixed lightweight filler for the preparation of numerous surfaces prior to painting or wallpapering. Based on high strength lightweight polymeric fillers, the product outperforms conventional fillers in most applications. Designed for professional and DIY use. BENEFITSOne Strike fills in one go, there is no need to build up layers of filler - fills up to 75mm deep in one application. It is easy to use with the lightweight paste being incredibly easy to apply. No sanding is required as it finishes to a smooth surface with no sagging as the lightweight properties of ONE STRIKE prevent sagging even on ceilings. It is quick drying allowing it to be ready to paint/paper in just 30 minutes and is overpaintable with most solvent based and emulsion paints and is overstainable. Suitable for internal or external use and dries brilliant white. Fills gaps and holes in:- Plaster- Brick- Stone- Wood- RenderEverbuild One Strike Filler 1 Litre
Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP® gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 4.Weight 1900g (4 1/2lb).Diameter 50mm (2 in).
Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.Size. 25 mm x 200 mm.
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 3.Weight 1300g (3lb).Diameter 44mm (1 3/4 in).
Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint.MON138 138r 15 & 22mm Copper Pipe Jointer Specifications:Pipe diameters: 15mm and 22mm. Pipe thickness: 0.7mm and 0.9mm.
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB58 bevel edged chisel is blue and has the following dimensions:Blade width: 16mm (5/8 inch)Blade length: 140mm
The STANLEY FATMAX® Autolock Tape has been designed to be compact. Its ergonomic bi-material case provides increased grip and comfort for ease of use. The Autolock technology ensures the blade feeds out and stops the blade from retracting, whilst the blade can be retracted by simply pressing the button. The Mylar® coated blade offers 10 times more resistance to abrasion and wear compared to a lacquered blade. The tape is highly precise to Class II accuracy and features a Tru-Zero® end hook which moves to compensate for inside and outside measurements, providing an accurate reading. It has a 3m blade stand-out for increased reach and easier measuring. With a detachable hook that allows the user to work efficiently in different conditions. It also includes a secure hook storage, so you won't lose the tape when not in use. FEATURES: - Patented reverse lock mechanism for greater control and increased blade life- BladeArmor® coating on the first 80mm for double the blade life- Mylar® coated blade is up to 10 times more resistant to abrasion than lacquered blades- 32mm Wide blade delivering 3m blade standout for increased reach and easier measuring- 3 Rivet hook is 40% stronger than a 2 rivet hook- Detachable hook allows user to work efficiently in different conditions- Bi-material case for comfort- Includes Detachable magnetic and XL hooks for improved efficiency- Belt clip for additional convenience and accessibility This Stanley FatMax® Autolock Pocket Tape has metric graduations only. Blade Length: 5mBlade Width: 32mmBlade Stand-out: 3mAccuracy: EC Class II
These DEWALT 9G G12 Galvanised Staples are designed to be used with the DCFS950 Fencing Stapler. G12 galvanised for outdoor durability.Pack of 960 DEWALT DFS9200B1G 9G G12 Galvanised Staples 50mm
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB34 bevel edged chisel is blue and has the following dimensions:Blade width: 19mm (3/4 inch)Blade length: 140mm
The Stanley FatMax® Torpedo Level (3 Vial) with a die-cast aluminium body and solid block vials for maximum durability. It has a pipe groove, and is ideal for use on rounded surfaces. The level has magnets in its base which make it ideal for erecting scaffolding. Has a 5 year accuracy guarantee under warranty.
Scan directly ventilated goggles that will withstand medium energy high-speed impacts up to 120m/s (270mph). Large size direct ventilation through frame. Compact lightweight construction, can be worn over spectacles. Tough polycarbonate UV resistant lens. Elasticated headstrap with soft vinyl flanges around the goggles ensure comfort and conformity to facial contour. Conform to EN166:1B.Scan Direct Vent Safety Goggles
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 5/8 x 6 Box 200
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 5.0 x 90mm.Box quantity: 100.
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 55mm.
The DEWALT DPG66 Nitrile Nylon Gloves have a 100% nylon polyester construction with a nitrile-coated palm for improved grip. The breathable nylon/polyester shell helps to keep hands cool in warmer weather. They offer excellent dexterity and are ideal for general handling. Conform to CE EN 390
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley Green Offset Aviation Snip Right Cut 250mm (10in)
The DEWALT high carbon steel (HCS) construction blade with universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil. These blades are ideal for fast cuts in wood, logs, plywood, laminates and plastics. Supplied in a pack of 5.These DEWALT HCS Sabre Saw Blades have the following specification: Cut Type: Coarse, fast cuts in wood.Length: 240mm.Pitch: 5-6.5mm.Pack Quantity: 5.Equivalent Bosch Reference: S1531L.
Faithfull Professional quality hexagon keys made from fully hardened chrome vanadium steel. All keys from 4mm (5/32in) have chamfered edges to prevent damage to blade and fittings. All keys 3mm (1/8in) and above are marked with their size.Size.1/2in AF.
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102798 Hard Tile Drillbit has the following specifications:Diameter: 25mm.
Master Lock Grip Tight™ circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel.Master Lock Grip Tight™ circuit breaker lockouts not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel. The Lockout Griptight Set comprisess: MLK491B, suitable for wide and tall breaker toggles. MLK493B, suitable for standard breaker toggles.
Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, Iron and most metals. Manufactured to meet DIN 338 standard.Size. 5.50 mm Dia. Pack of 2
The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast.Capacity: 25mm (1in) Throat depth: 16mm (5/8in)
The Knipex 74 01 range of High leverage diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 20% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 01 series come in 160, 180, 200 and 250mm versions with PVC dipped handles for added comfort and a better grip. The 74 01 series are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most the Knipex range of nippers and cutters the 74 01 range are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc.Length 200mm (8 in).
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.2.50mm.
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.3.00mm.
The Scan TSA Approved Combination Padlock is the ideal solution when travelling abroad to countries using the TSA system. This allows customs officials to search luggage using the correct TSA key, numbered on the lock, so that the actual padlock is not damaged during the search and can then be relocked. It has a zinc alloy body with a steel shackle. The 4 wheel combination allows for 10,000 individual codes. Specification: Padlock Width: 31mm.Shackle Height: 21mm.Shackle Diameter: 3.5mm.Shackle Width: 11mm.Security Rating: 2.
