ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 60mm.Pack quantity: 50.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.0 x 45mm.Box quantity: 200.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 5.0 x 30mm.Box quantity: 200.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 4 x 400mm.Box quantity: 200.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 50mm.Box quantity: 200.
ForgeFix Nyloc Nut & Washers offer a total fastening solution. Bright zinc plated for increased corrosion resistance. Suitable for use in many different fastening applications.Supplied in a handy ForgePack.
ForgePack of 20 ForgeFix Nyloc Nut & Washers M6.
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Size: M8 x 130mm.Pack quantity: 50.
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 5/8 x 6 Box 200
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 1/2 x 6 Box 200
DEWALT Harrison Pro Stretch Trousers with holster pockets. These slimmer-fit trousers have 4 stretch inserts in key areas for flexibility and comfort. Cordura reinforced knee pads and lower hems provide increased durability.These DEWALT Harrison Pro Stretch Trousers have the following specification: Colour: Black/GreyWaist: 34in Leg: 33in
W8 Diamond Whetstones 200mm (8 in) are ideal for kitchen use and for the honing of smaller workshop tools. They have a large, wider diamond surface for sharpening a variety of knives and edges. They are supplied with a non-skid hardwood case, and tabs for permanent mounting are moulded into the stone's base. Black: Extra Coarse Grade 220, 60 micron.Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron
The Bahco 244P-22-XT Blue XT Handsaw is suitable for cutting coarse or thick wood materials. It has unique XT-toothing and hardpoint teeth for long-lasting sharpness. It has two sets of teeth that work in conjunction with each other, one set cuts and the second set clears with each stroke. In addition, the blade has a low friction, anti corrosion blue coating. This is a powder coating is magnetically bonded to the blade and teeth, leaving it rust proof and easy to use. The saw's screwed, 2-component handle can be used as an approximate 45° and 90° marking guide and increases user comfort. Specification Length: 550mm (22in).Blade thickness: 1.03mm.Teeth: 9 tpi.
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 35 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Ronseal Diamond Hard floor varnish is ideal for any wooden floor. It provides protection against heavy foot traffic, knocks, scuffs, scratches and its non-yellowing formulation enhances the natural beauty of the wood. Touch dry in 30 minutes, it means floors are back in use as soon as possible. Ideal for use on any type of wooden floor especially in areas subject to heavy foot traffic and has the following specifications:8m² per litreAreas of use: Wooden floorsCoverage: 20m2 covered per litreNumber of coats: 3Finish: Gloss and SatinApplication: BrushDrying time: 30 minsProtection level: Very highThe Ronseal RSLDHFVG25L Diamond Hard Floor Varnish comes in the following:Finish: GlossSize: 2.5 Litre
The Bahco ERGO™ VDE Insulated Screwdrivers built for slotted head screws. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The black oxide finish tip provides higher accuracy.Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage.Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V.Conforms to: ISO 2380/DIN 5264.
1 x Bahco ERGO™ VDE Insulated Slotted Screwdriver 3.0 x 100mm
Ronseal One Coat Tile Paint rejuvenates old tiled surfaces for a completely new look without the need to re-tile. Ideal for use on kitchen and bathroom tiles. It is waterproof and mould resistant. No primer required. Water-based with a low V.O.C content. Suitable for bare or previously painted tiles. This product is NOT recommended for floor tiles or tiled work surfaces.1 x Ronseal One Coat Tile Paint Ivory Satin 750ml
Tri-Flow provides preventative maintenance and problem solving solutions for the most demanding applications. Its unique formula also contains P.T.F.E. to maximise load bearing, reduce friction and wear and resist corrosive build up. - Virtually eliminates friction and wear, even under the most extreme pressure and abrasive conditions.- Displaces and prevents the build-up of dirt and dust.- Repels moisture, preventing the formulation of ice, rust and other corrosives.- Effective at -53° C to +246° C. Protects, lubricates and penetrates. Suitable for use on:- Folding ArmsHingesPulleysGuide RailsGearsAgricultural MachineryWater PumpsLawnmowersSoil Working ToolsTracksPneumatic Components (cylinders, valves, etc...)Roller TablesWinchesCement MixersLifting ArmsChainsCablesLocksTool ProtectionBearingsRunnersScaffoldingEarth-Moving EquipmentPneumatic DrillsConveyor BeltsRevolving SupportsDrillsValvesSize: 500ml.
The Roughneck Railroad Pick Axe has a head made from roll forged alloy steel. That has hardened and tempered with a black painted finish. The ends are chisel and point. The fibreglass handle has a solid core and polypropylene cover. Supplied in a handy carry box.1 x Roughneck Fibreglass Handle Railroad Pick Axe 3.18kg (7lb)
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel and chrome plated in a matt finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or tightened, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, just push the direction lever to remove or tighten the nut or bolt with a ratchet action. They are an ideal option for motor mechanics, as these spanners can be used in awkward places and minimal movement is required to use them.1 x Bahco S4RM Series Reversible Ratchet Spanner 30/32/34/36mm
Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 270mm (10 1/2 in)Teeth 18.5 tpi
Tri-Flow provides preventative maintenance and problem solving solutions for the most demanding applications. Its unique formula also contains P.T.F.E. to maximise load bearing, reduce friction and wear and resist corrosive build up. - Virtually eliminates friction and wear, even under the most extreme pressure and abrasive conditions.- Displaces and prevents the build-up of dirt and dust.- Repels moisture, preventing the formulation of ice, rust and other corrosives.- Effective at -53° C to +246° C. Protects, lubricates and penetrates. Suitable for use on:- Folding ArmsHingesPulleysGuide RailsGearsAgricultural MachineryWater PumpsLawnmowersSoil Working ToolsTracksPneumatic Components (cylinders, valves, etc...)Roller TablesWinchesCement MixersLifting ArmsChainsCablesLocksTool ProtectionBearingsRunnersScaffoldingEarth-Moving EquipmentPneumatic DrillsConveyor BeltsRevolving SupportsDrillsValvesSize: 4L.
The Bahco sports knives have a durable alumiunium handle, with stainless steel blades and mechanism. The blades lock securely into position when fully unfolded and are only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knives allow for a safety strap to be attached. This BAHBSTK Twin Blade Sports Knife features two different blades - one standard utility blade and one sports knife blade with serrated edges.
The Makita HR3001CJ SDS Plus Rotary Hammer offers 3-modes of operation: Rotation only, Hammering with Rotation, and Hammering only. Variable speed with constant speed control and forward/reverse rotation for more comfortable handling, even in demanding applications.Drilling efficiency has been drastically increased by the redesigned hammering mechanism. A 'no hammering when idling' function helps increase tool life. Fitted with an anti-vibration main handle for increased comfort. A torque limiter and double insulation increase user safety. Supplied with: 1 x Depth Stop, 1 x Side Handle and 1 x Type 4 MAKPAC Connector Case. Specifications: Modes: Rotation only, Hammering with Rotation, and Hammering only.Input Power: 1,050W.No Load Speed: 0-840/min.Impact Rate: 0-4,500/bpm.Impact Energy: 3.9 joules.Capacity: Concrete: TCT Bit 30mm, TCT/Diamond Core 80mm; Wood 32mm, Steel 13mm.Weight: 4.1kg. The Makita HR3001CJ SDS Plus Rotary Hammer in the 110V Version. Supplied with: 1 x Depth Stop.1 x Side Handle.1 x Type 4 MAKPAC Connector Case.
The Makita DK0176G205 40Vmax Twin Pack contains the following: 1 x 40V HP001G XGT 40Vmax Brushless Combi Drill with 2 mechanical gears, trigger controlled variable speed, and both forward and reverse rotation. A digital display provides visual confirmation of the selected torque. Provides excellent performance in continuous heavy-duty applications. Active Feedback Sensing Technology (AFT): Shuts down the tool if the rotation speed suddenly slows down. Chuck: 13mm Keyless.No Load Speed: 0-650/0-2,600/min.Impact Rate: 0-9,750/0-39,000/bpm.Torque: 68Nm/140Nm, Settings: 21/41.Capacity: Concrete/Metal 20mm, Wood 76mm.Weight: 3.0kg. 1 x 40V TD003G XGT 40Vmax Brushless Impact Driver with 4 modes of impact power selection:Max./ Hard/ Med./ Soft for bolt) and 1 T-mode for thin metal only. The rubber grip on the handle ensures a good working grip. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,700/3,200/2,100/1,100/min.Impact Rate: 0-4,100/3,600/2,600/1,400/bpm.Max. Torque: 210/170/50/20Nm.Tightening Capacity: Standard BoltM5 - M16. Also supplied with 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries, 1 x DC40RA XGT® Fast Li-ion Charger 240V and1 x Type 3 MAKPAC Connector Case.
The Makita DCO180 Drywall Cutter has been designed for cutting holes in drywall, at either construction or renovation sites. It has a high rotation speed for fast cutting. The anti-restart function prevents accidental restart of the tool, even if the switch is in the 'o' position when a new battery is installed. The compact, lightweight design features an ergonomic, barrel handle with soft grip for a secure, comfortable hold whilst minimising hand fatigue and pain. For added safety there is an electronic current limiter for overload protection. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Capacity: 1/8inStrokes at No Load: 30,000/min.Stroke Length: 11.5-31.0mmWeight: 1.7kg
The Makita HR3541C Rotary Hammer is fitted with Anti-Vibration Technology for increased user protection. Fitted with a soft start and able to maintain constant speed under load, this machine is truly versatile. The torque limiter stops the drill when the bit hits against reinforcements and it has a built-in job light. It has 3-modes of operation: rotary only, hammer only and rotary hammer. Supplied with a side handle, depth gauge, bit grease and a carry case. Specification Input Power: 850WNo Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpmImpact Energy: 6.1 joulesCapacity: Concrete 35mm, Core Diameter (TCT) 90mmWeight: 5.6kg All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec²Vibration Chiselling: 12.5 m/sec²Vibration Hammer Drilling: 18 m/sec²Vibration K Factor: 1.5 m/sec²Noise Sound Pressure: 93 dB(A)Noise SoundPower: 104 dB(A) Noise K Factor: 3 dB(A)1 x Makita HR3541FC SDS Max AVT Rotary Hammer 850W 110V Version
FatMax® Shallow Professional Organiser has 10 removable storage compartments, providing storage for small parts, components or accessories. It is made from transparent polypropylene, is virtually unbreakable lid and it allows the contents to be viewed easily. Features a waterproof seal that not only prevents water, but also rust and foreign particles from entering. It has metal catches. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Dimensions: 44.6 x 35.7 x 7.4cm Water resistant to IP53
FatMax® Shallow Professional Organiser has 10 removable storage compartments, providing storage for small parts, components or accessories. It is made from transparent polypropylene, is virtually unbreakable lid and it allows the contents to be viewed easily. Features a waterproof seal that not only prevents water, but also rust and foreign particles from entering. It has metal catches. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Dimensions: 44.6 x 35.7 x 7.4cm Water resistant to IP53
Pack of 2
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
Pack of 6
