IRWIN Record Quick Wrench is a lightweight multi-purpose pipe wrench. Suitable for the professional heating and plumbing installer and professional builder. Sintered high carbon steel upper jaw for strength, hardened serrated steel jaw teeth, lightweight but strong aluminium sliding body. Fitted with quick release trigger. Useful for one handed operation, for hard to reach areas. Also ideal for tightening and loosening plastic fittings. Pipe Capacity: 57mm (2 1/4 in).Length: 288mm (11 1/2 in).Weight: 550g.
A professional 1/4in square drive matt chromed deep hexagon socket. Produced in accordance with ISO 9000 and AS 954 specifications. Features the Teng Tools hip grip system for increased torque and reduced risk of rounding fasteners. Overall Length: 49.5mm.Size 8mm
Extension bars, sometimes called 'extender arms', allow access to nuts that are difficult to reach, typically in automotive applications. This Teng Tools extension bar has a 3/8 inch square drive. It is manufactured from chrome vanadium steel for strength and durability, and has a satin finish.Wobble bar extension Size 150mm (6 in)
The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. These extra long bits are 40cm (16in) in length, making them ideal for drilling through walls, ceilings and floors.Specifications:Diameter: 18mm.Working length: 10mm (4in).Overall length: 400mm (16in).
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 3/4inLength: 38mm
Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place.
Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time.
By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe.
• Connects two 15mm pipes quickly and securely
• Install or demount in seconds by hand
• Easier to install in confined spaces – no hot works or tools required
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0415W
Warranty (years) 50
Diameter (mm) 15
Pack Size 1
Fitting Type Coupler
Equal or Reducing Equal
The Faithfull SDS Max drills have a specially designed shank which enables them to fit into any machine with an SDS Max Chuck. These are generally large and powerful machines and the special SDS Max drill design ensures there is no slippage. All drill bits have a special L shaped flute profile for increased dust extraction and are also ideal for concrete and brick. The Faithfull FAIMAX25520 SDS Max drill has the following specifications:Size: 25mmWorking length: 400mmOverall length: 520mm
PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder. No need to add additional solder when installing, saving time.
PrimaPlus Solder Ring can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
The McAlpine WC-F18S is a flexible WC (water closet) connector used to connect the toilet pan to the waste pipe. The connector has an inlet diameter of 97-107mm and an outlet diameter of 3½"/90mm, making it suitable for a range of toilet pan sizes and waste pipe configurations.
The flexible design of the connector allows for some movement and adjustment, making it easier to install and ensuring a secure and leak-free connection. The connector is made from a high-quality, durable material that is resistant to chemicals and UV light, ensuring long-lasting performance.
Overall, the McAlpine WC-F18S is a reliable and effective solution for connecting a toilet pan to a waste pipe, and is widely used in both residential and commercial plumbing applications.
・ Available in 3 lengths
・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Enables easy installation of WC pans in awkward situations
The Duracell CR2016 Coin Lithium Batteries are designed to provide the power any electronic device needs to remain functional. The ideal choice for key fobs, small remotes, scales, wearable devices, sensors, digital thermometers, glucometers, heart rate monitors or bike accessories. Pack of 2.
The ABUS 65 Series Marine Brass Padlocks have a body made from solid brass and a stainless steel shackle. The inner components are made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom keys offers greater protection against manipulation. The padlock locks automatically, it does not require a key. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required.This ABUS 65IB/40 Brass Marine Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 22.5mm.Shackle Diameter: 6.5mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.
The STANLEY® Tylon Hi-Vis Pocket Tape has a corrosion-resistant, long-life Tylon coated blade with both metric and imperial graduations. A positive blade lock ensures accurate measurements.The blade is fitted with a Tru-zero hook which compensates accurately for internal and external measurements. Its Hi-Vis, impact-resistant ABS plastic case is fitted with an ergonomic overmould for all-day comfort. Triple riveted construction improves strength and durability.This STANLEY® Hi-Vis Tylon Tape Measure has the following specifications:Blade Length: 5m/16ftBlade Width: 25mmAccuracy: Class II
These black drywall screws are designed for fixing plasterboard to timber studwork, delivering a strong and reliable fixing with a clean, professional finish. The bugle head allows the screw to sit flush with the plasterboard surface without damaging the board, making them ideal for dry lining and interior fit-out work.
Manufactured from hardened steel for strength and durability, the black phosphate coating helps improve corrosion resistance and provides smoother driving performance. The sharp point and coarse thread ensure quick penetration and excellent holding power in timber substrates.
Supplied in a bulk pack of 1000, these drywall screws are ideal for trade professionals, installers, and larger construction or renovation projects.
Features and benefits:
Size 3.5mm x 32mm drywall screws
Bugle head for a neat, flush finish
Black phosphate coating for durability
Coarse thread for secure fixing into timber
Suitable for plasterboard to timber applications
Ideal for trade and professional use
The Yale PM444 series security door bolts are concealed (mortice fixed) into the door with a bolt which throws into the door frame. Operated by using the key supplied giveing added securiy and extra protection to your home.The Yale YALP2PM444KB is 2 x Additional Keys Only for PM444 Door Security Bolts. The additional key is ideal to store in a safe place in case of misplacement of the original key.
These black drywall screws are designed for fixing plasterboard to timber studwork, providing a strong, secure, and professional finish. The bugle head design allows the screw to sit flush with the surface without tearing the board, making them ideal for dry lining and interior construction work.
Manufactured from hardened steel for strength and durability, the black phosphate coating offers corrosion resistance while improving screw driving performance. The sharp point and coarse thread ensure fast penetration and excellent holding power in timber.
Supplied in a bulk pack of 1000, these screws are ideal for trade use, large projects, and regular installers.
Features and benefits:
Size 3.5mm x 38mm drywall screws
Bugle head for a flush finish in plasterboard
Black phosphate coating for improved durability
Coarse thread for strong fixing into timber
Suitable for plasterboard to timber applications
Ideal for trade and professional use
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 590g (1 1/2lb).Diameter 32mm (1 1/4 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size A Thor split head hammers .Face diameter 25mm (1 in)
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 14mm.Length: 152mm.
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 17mm.Length 281mm.
IRWIN Vise-Grip Locking C Clamps reach into places where ordinary clamps cannot be used. Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release.Visegrip Irwin 6SP Locking C Clamp Swivel Pad. Length: 150mm (6in).Throat Diameter: 32mm (1 1/4in).Capacity: 50mm (2in).
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 19mm.Length 281mm.
The McAlpine R16 is a plumbing component that features a 1¼" plain tail on one end and a 19/23mm universal connection on the other.
The plain tail is designed to fit into a plumbing component with a corresponding size and shape, while the universal connection allows for a range of different components to be connected to the R16. This makes it a versatile and practical option for a range of different plumbing installations.
The R16 is made from high-quality materials, which ensures that it is durable and long-lasting. It is also easy to install and can be used with a range of different plumbing components.
Overall, the McAlpine R16 is a reliable and practical plumbing component that is designed to be used in a range of different situations. Its plain tail and universal connection make it versatile and easy to use, while its high-quality construction ensures that it will last for years to come.
・ 1¼" Plain Tail to BS EN 1329-1:2020 solvent weld
・ Plain tail is designed to fit into other fittings or Traps with Multifit or universal connections
・ 19/23mm Universal Connection
The Moore & Wright 400 Series Dial Indicator has a satin-chromed body with a tungsten carbide measuring contact and a double dial indicator for measuring mm stroke. The design is shockproof incase of accidently knocks. The scale can be adjusted with the stop screw. The 400 Series Dial Indicator is manufactured to DIN 878 standards. Supplied packed in a foam box. Range: 0-10mm.Resolution: 0.01mm.Dial Diameter: 58mm. Type: Ear Back.
Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling.Size 1.5mm (1/16 in).Length 100mm (4 in)
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 6.4mm (1/4 in).
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 13mm (1/2 in)
Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 6mm (1/4 in)Contents A to Z Plus & (and)
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 44mm (1 3/4 in)
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 36mm.Length 381mm.
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
The Faithfull Flap Discs have been designed for use with most angle grinders, flap discs are manufactured from long lasting zirconia alumina. Resin bonded for extra strength and durability, ideal for use on wood, metal and plastic.Diameter Size 100mmBore 16mmGrade Medium (60 Grit)
Metabo Starlock BIM Plunge Cut Saw Blade with high-quality teeth for long service life and high cutting quality. Lasered depth scale for precise immersion depths.
