The Masterlock Pro Series™ Shrouded Shackle Padlock range is designed to endure the toughest security applications by providing extra protection against corrosion, abuse and attack. They have tough boron alloy shackles, dual ball bearing locking mechanisms for maximum pry resistance and layered laminated steel cores for strength. The shrouded shackle design provides additional protection, and the xenoy outer casing delivers excellent weather resilience. The precision 6-pin cylinder delivers optimal pick resistance and is protected by a snap-on cap. Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock 6327KA-11G203 has the following specifications:67mm laminated steel padlock with xenoy protective cover - 19mm boron alloy shackle, 11mm diameter with iron shroud - precision 5-pin cylinder - dual ball bearing locking - key retaining - keyed alike
This Teng Tools Torx keys with T handles, each have a short arm and a long arm. The short arm allows excellent leverage allowing easy tightening and loosening and also has a slot to work on tamperproof screws. The long arm allows access to more difficult to reach areas. The keys are made from Chrome Molybdenum alloy steel for extra strength. This 7 piece set of Torx keys for internal TX heads consists of the following sizes: 3 x 100mm TX/TPX keys (TX/TPX10, TX/TPX15 and TX/TPX20). 3 x 150mm TX/TPX keys (TX/TPX25, TX/TPX27 and TX/TPX30). 1 x 190mm TX/TPX key (TX/TPX40). Supplied in handy storage tray.
IRWIN Jack coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8tpi for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material. The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.Suitable for cutting the following timber:-HardwoodSoftwoodRough TimberBoard SheetPlasterboardWorktopTeeth 8 tpi.Length 550mm (22 in)
Irwin Pro Touch Retractable Blade Knife is ideal for general maintenance jobs. It has a lightweight, hardwearing aluminium body which gives 6x longer life. Made from lightweight but hard-wearing aluminium, with thicker walls in areas of greatest wear e.g. nose underside, heel. Virtually unbreakable blades, and quick blade change features. Spring loaded push button opener. Designed to fit the hand, allowing maximum grip and minimum wrist distortion. Blade slider held permanently in place whilst a magnet holds working blade in place.Spare blades held securely so there is no edge damage and no rattle, and features a hinged opening mechanism. Patented quick blade release for easy renewal of sharp blade edge.
The Faithfull Scaffold Level Holder, made to a high specification using quality heavy-duty split suede. Made to last and provide dependable service. Single pocket for small spirit level. Looped for attachment to a separate belt. Size: 270 x 90mm (10.1/2 x 3.1/2in).
The Purdy® White Dove™ Jumbo Mini Kit includes everything you need to complete a mini roller job. Contains: 2 x White Dove™ Jumbo Mini Sleeves 114 x 19mm (4.1/2 x 3/4in) They are made from woven Dralon® fabric to deliver an ultra smooth finish and also to reduce dripping and spatter when loading paint. This superior finish makes the sleeve ideal when working on domestic jobs. The tapered end reduces tram lines, to deliver a consistent high-quality, lint-free finish. Suitable for all latex and oil based paints, and for all paint finishes. Nap: 3/8in (10mm). 1 x Jumbo Mini Roller Frame with an open design that ensures more paint is delivered onto the wall and is easier to clean with no residual paint build-up. Fitted with patented ribbed ends to ensure no sleeve roll-off and an ergonomic comfort grip handle. Ideal when painting hard to reach areas in kitchens, bathrooms or alcoves. 1 x Heavy-Duty Mini Roller Tray
This Teng Tools set is an ideal solution for removing broken screws, pipes, bolts and studs. The 11-piece set contains 5 screw extractors, 4 bolt extractors and 2 nut splitters, which are supplied in a handy storage tray. The TTSN11 Stud and Nut Remover Set contains the following: 5 x Screw extractors: 7/64, 9/64, 5/32, 1/4 and 19/64 inch. 4 x Stud 1/2inch drive extractors: 6, 8, 10 and 12mm. 2 x Nut splitters: 5-20mm capacity and 14-27mm capacity.
The Teng Tools 3 piece pry bar set is ideal for levering, positioning and aligning jobs. The bar's roll heads ensure excellent leverage, whilst their pointed taper end can be used for lining up. Supplied in storage tray. Contents: 1 x 12in Roll/Heel Bar.1 x 16in Roll/Heel Bar.1 x 20in Roll/Heel Bar. Specification Dimensions: 560 x 110 x 40mm.Weight: 1.6kg.
Teng Tools Impact Sockets are specifically designed for use with power tools. Manufactured in chrome molybdenum steel in accordance with GGG-W-6608, these sockets ensure the highest quality. Each socket is individually branded and size marked for quick identification, and meets ANSI standards for use in automotice applications. Supplied in a storage tray. Contents: 8 x Regular 6 Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 & 24mm.8 x Deep 6 Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 & 24mm. Specification Dimensions: 265 x 142 x 50mm.Weight: 2.2kg.
The Masterplug PRO-XT Open Cable Reel is lightweight and sturdy. Designed and engineered for longevity, the plastic drum provides reliable protection when in use, transported or stored. This cable reel provides 4 shuttered sockets, power switch, LED indicator, highly visible green cable and has a built-in safety thermal cut-out for protection against overloading when fully reeled. Specification: Voltage: 240VFully Unwound: 3120W (13A)Fully Wound: 720W (3A)Switch: Double PoleCable Length: 25mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
The Kuny's SW-1504 Carry All Tool Pouch is made from tough polyester fabric. It has 9 pockets in total - 7 internal pockets inside the zipped compartment and 2 external pockets. In addition, the tool pouch has 5 web loops for extra carrying capacity. Its carabiner is ideal for carrying keys, small tools etc.
This Teng Tools Hex key with T handle, has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. Manufactured from chrome vanadium steel for toughness and durability.The TEN510508 T Handle Hex Driver has the following specifcations:Size: 8.0mm.Short arm length: 18mm.Long arm length: 190mm.
The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135 degree non slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.Diameter: 10.0mm
The R.S.T. Philadelphia Brick Trowel has a plastic ferrule, metal tang and hardened and tempered blade. The handle is soft touch, adding comfort. This Philadelphia shape of the trowel is well suited to laying blocks, allowing more mortar to be placed on the blade.Size: 280mm (11 inch).
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4332 Series 60 Circular Saw Blade has the following specification: Finish: General Purpose.Blade Diameter: 315mm.Bore Size: 30mm.Tooth Count: 48.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
The Arrow T59 Insulated Staples are for use with the Arrow T59. Ideal for tacking bell wire, etc.Arrow T59 Insulated Staples have the following specification: Size: 6 x 6mm.Colour: Clear.Quantity: Box 300.
Irwin specialist cutter, suitable for cutting PVC tubes. With smooth cutting action and simple ratchet cutting mechanism for one handed operation. Capacity: 45mm.
The Yale PM444 series security door bolts are concealed (mortice fixed) into the door with a bolt which throws into the door frame. Operated by using the key supplied giveing added securiy and extra protection to your home.The Yale YALP2PM444KB is 2 x Additional Keys Only for PM444 Door Security Bolts. The additional key is ideal to store in a safe place in case of misplacement of the original key.
Sets of non-interlocking zinc stencils in a range of sizes. Useful for making signs and marking cartons and packing cases.Letter set contains - 27 pieces consisting A to Z Letter Size: 3in
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURD has the following specifications: 50mm solid brass padlock - 25mm hardened steel shackle, 7mm diameter - 5-pins
The Kuny's fully adjustable braces to fit all sizes, with 52mm (2in) wide elastic material. Nylon stitched for durability and heavy-duty steel fastening clips.Colour = Navy
The Steelmaster claw hammer has a heat treated and polished carbon steel head for strength, durability and safety. A seamless, oval tubular steel shaft provides strength and balance and the vinyl soft-grip ergonomic handle gives comfort and grip in use.Weight 454g (1 lb)
The Bacho SE-15 Professional Bowsaw for all types of work, especially in building, gardening, farming and forestry applications. It comes complete as a saw with a peg toothed blade, type 51 (The teeth points are high-frequency, heat-induction hardened for long-lasting performance), for cutting dry wood and is powder painted steel tube for excellent rust protection with knuckle protector offering comfort and safety.The Bahco SE-16-21 Economy Bowsaw has a pointed nose for better access in tight areas.
The IRWIN QUICK-GRIP® Clamps have a high-tech resin construction which provides strength and durability. They are ideally suited for crafts which require simple and convenient light clamping.1 x IRWIN QUICK-GRIP® Spring Clamp 75mm (3in)
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS5160 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 5mmWorking Length: 50mmOverall Length: 110mm
45 Series Philadelphia pattern pointing trowels with wooden handle, solid forged, made from high-grade tool steel with a fully ground and polished finish. Made to the usual high Marshalltown standards.Wooden handle.Size. 180mm (7 in).
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.28.3mm.Key Type.MB. 8mm hexagonal wrench
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).The Bahco 466-400 Box Level has an anodised finished aluminium level with shock absorbing end caps and large vials thats provide ease of use. It offers permanent precision of ± 0.5 mm per metre. Machined surfaces and 'V' groove base, and a thick shaped profile. It also has laser marked measuring scale (for indication purposes only). Length: 400mm.Weight: 520g.
These Bahco Bowsaw Blades are ideal for cutting in dry seasoned wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 51-21 Peg Tooth Hard Point Bowsaw Blade 530mm (21in)
Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 76 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.50mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.10mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.50mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.10mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.10mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.40mm).
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.1 x Monument 2691G Autocut Spares Kit to suit both 15 & 22mm autocut pipe cutters
Designed for drill press work, the sliding jaw is a non lifting swivel type capable of holding any shape of workpiece.The horizontal and vertical vees accomodate round sections securely and the base is slotted to enable the vice to be bolted to drill press tables. Base, end face and side faces are machined to assist quick and accurate positioning.Features include, unique swivel jaw for any shape of workpiece.Cross drilled handle with tommy bar for extra leverage. Precision machined base and end face for horizontal and vertical mounting. Jaw Width. 100mm (4in).Jaw Opening: 75mm (3in).
