These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 200 Bag 10
VELCRO® Brand Hook & Loop Heavy-Duty Stick On Tape is the quick and easy to use alternative to nails, screws and glues. With extreme holding power, holds weight up to 7kg per 50mm x 100mm piece (adhesive reaches maximum strength after 24 hours). To use: clean and dry both surfaces. Peel backing paper and press firmly to surfaces. Allow 15 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black.The VEL60241 Heavy-Duty VELCRO® Brand Stick On Tape comes in the following: Colour: Black.Size: 1m x 50mm. Allow 15 minutes to set (or longer for heavier items) before attaching.
The Lessmann Universal Hand Brushes have been designed for the DIY enthusiast and are useful for many cleaning operations. Size: 260 x 28mm. 056.301: 0.3 Crimped Steel Wire.056.501: 0.3 Stainless Steel Wire.056.701: 0.3 Brass Wire.The Lessmann Universal Hand Brush has the following specification: Wire: Stainless Steel.Wire Guage: 0.3.
Dowsil™ 784 Glazing Sealant is a one-part, silicone sealant. It has good adhesion to glass, aluminium and other non-porous construction substrates. It contains a fungicide, making it ideal for use in areas where mould growth can occur. Conforms to ISO 11600-G-20LM. It has excellent weathering characteristics, including resistance to ozone, UV radiation and temperature extremes, and has an application temperature range +5 to +40°C.Dowsil™ 784 Glazing Sealant, White
These Forgefix single thread Coach Screws are Zinc plated for increased corrosion resistance. Their hex head enables higher torque capability when tightening, and increased speed of use with socket drivers. These Coach Screws conform to DIN 571 standards. APPLICATION:Used widely in heavier timber installations and for fixing timber to masonry. Also popular as a fixing for satellite dish installation together with a rimmed or rimless wall plug. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust which (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity. Single thread screws have been designed to offer higher pull out values and quicker insertion.
Bag of 10 ForgeFix Coach Screws Hexagon Head Single Thread ZP M10 x 40mm
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1.1/2 x 10 Box 200
This Bahco sports knife has a durable polyamide handle, with stainless steel blades and mechanism. The blade locks securely into position when fully unfolded and is only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knives allow for a safety strap to be attached, for added safety. The BAHBSLK knife uses utility blades, which can be replaced when blunt.
These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for light section purlins. They have a Torx, countersunk head to sit flush to the surface. The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing. The screws are zinc plated and have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. These light section roofing screws are suitable for fixing timber to steel thicknesses of 1.5mm to 4mm. Each pack is supplied with a free Torx bit.The TFCL5560 TechFast Roofing Screws have the following specifications: Size: 5.5 x 60mm.Pack quantity: 100.
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M8 x 115 Bag 10
The Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. Can be used on concrete and masonry and have a grey sandblasted professional finish. They are suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.1 x Irwin Speedhammer Plus Flat Chisel 20mm Length 250mm
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials. The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads. Also known as 'Loose Bolt' sleeve anchors. APPLICATIONWidely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.Sleeve Anchor Fixing Hex Bolt M10 x 77 Bag 10
Roughneck Wire Brush Set contains one each of nylon, stainless steel and brass bristles with intergral scrapers. Each brush has a TPR soft grip handle and they are suitable for general cleaning, the preparation of most types of large surfaces and also cleaning small parts such as contacts on spark plugs. This wire brush is ideal for cleaning patios, decking and barbeques. It can also be used for cleaning paint, rust, damp patches from brickwork, workwork, metalwork etc. Each brush is 7 inch with 5 rows of 11 sets of bristles.
Blackfriar Exterior Woodstain stains, protects and finishes exterior timber. It can be used on all hard and softwoods. Its weather-resistant, water-repellent satin finish resists flaking, peeling and cracking. It is also Microporous, so it lets the timber breathe. For hard and soft woods. Application Method: Brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 7 days.Recoatable: 16 hours.Blackfriar Traditional Exterior Woodstain Golden Teak 1 Litre
Master Lock 1.8m Self Coiling Combination Cable with a pin tumbler cylinder and a coloured vinyl covering that helps to prevent scratching. All Master Lock bike locks have a Lifetime Warranty against mechanical failure. Specifications:Length: 1.8m. Diameter: 8mm. Type: 4-digit resettable combination.
The SDS Max chisels are ideal for heavy-duty chiselling, channelling, and demolition tasks in concrete, stone (medium hardness), floor and wall tiles, general masonry and mortar.This SDS max steel clay spade is made from specially toughened steel which ensures tough bits and micro-processor controlled heat treatment providing for consistently tough, long life. The DEWALT DEWDT8090QZ has the following dimensions:Width: 110mmLength mm: 400mm
Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, so you can apply a second coat after just 4 hours, enabling you to finish the whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement. Application method: Brush or spray. Coverage: 14m²/L/CoatTouch Dry: 1-2 hoursHard Dry: 3 daysRecoatable: 4 hoursBlackfriar Quick Drying Acrylic Primer Undercoat Colour: White.Size: 500ml.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 185mmInsulation Thickness: 98-164mmPack Size: 50Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 7mmWorking Length: 100mmOverall Length: 160mmPack Quantity: 1
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 40 Bag 10
The ForgeFix Tool Clips can be used in a wide variety of applications to store and display various items including tools, brooms, rakes, rods, pipes etc. They have a bright zinc plated finish.1 x Bag of 25 ForgeFix Tool Clips 1/4in Zinc Plated
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. They can be used for fast cutting in wood, wood with nails and tough plastics. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2350QZ reciprocating blade is ideal to be used for fast cuts in wood with nails and tough plastics. The blade has a new Plunge point tip for accurate plunge cutting.
These Roughneck Flared Screwdrivers have blades made from S2 steel, which has been hardened and tempered. They have magnetic tips and triple injected soft-grip handles. For easy identification, the screwdrivers' handles have the size and type clearly written on the handle, with a larger graphic at the end of the handle.Specifications:Tip type: Flared.Size: 4mm x 75mm.
This Everbuild SURVEYRE comes in a varity of colours: Blue, Red, White and Yellow an are ideal for identifying walkways, product storage locations and fire exit routes or to create floor markings to indicate pallet locations and aisle identification on concrete floors. This high definition, fast drying, spot marking paint is ideal for most applications where spot markings are required. The semi permanent formula lasts at least 3 months after application. A spray applied marking paint for contractor's/surveyor's spot marking. Colour-coded for electric, gas, water and cable company use. Semi-permanent formula lasts at least 3 months after application.Colour: White.Size: 700ml.
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1/2 x 10 Box 200
The Stanley range of Torx headed bits are supplied in packs of 3 or 25. They are 25mm long screwdriver bits in a large range of sizes: T10, T15, T20, T25, T30 and T40. All the Stanley torx bits are 1/4-inch hex, are precision machined for the perfect fit and are forged and ground for long life and durability. Suitable for use in industrial, construction, DIY, motor trade, or security applications.Tip size: T25 Torx.Length. 25mm x 1/4-inch hex. Box of 25.
These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1 x 8 Box 200
ROCOL SAPPHIRE® Aqua 2 Bearing Grease is a soap thickened grease designed to give superior resistance to water washout. Provides exceptional corrosion protection and long term lubrication for bearings operating in water or exposed to continual water washing. Temperature range of - 20°C to + 150°C.
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.70.0mm.Key Type.ME. 14mm hexagonal wrench
Everbuild Roll & Stroll is the ultimate self-adhesive floor protector, ideal for protecting floors against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work.Roll and Stroll is totally waterproof, fire retardant and sticks to most types of flooring including carpet, wood, laminate, stair cases, ceramics, vinyl and stone. Roll and Stroll will also protect window ledges and sills etc. Roll and Stroll is reverse wound for easy application with minimum effort. Roll and Stroll is ideal for a multitude of uses in engineering, commercial and industrial applications. Designed for heavy usage, Roll and Stroll has a heavy-duty anti-slip cross weave which will not tear or rip.BENEFITS:- Easy roll out with no specialist applicator equipment required.- Will not creep and wrinkle after application. Stays where it is put!- Totally waterproof.- Protects against expensive to clean spillages from paints, varnishes etc.- Easily removed, will not leave a sticky residue.- Can be left for up to 4 weeks.- Adheres to most common flooring types.- Heavy-duty anti-slip cross weave, will not tear or rip.- Safer than dust sheets, no trip risk.1 x Everbuild Roll & Stroll Premium Carpet Protector 600mm x 25m
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.Available in standard sizes, from 25mm to 150mm. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Round Head Nail Galvanised Finish 50mm Bag of 2.5kg
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 20mmWorking Length: 400mmOverall Length: 450mmPack Quantity: 1
Everbuild Pinkgrip SF direct bond solvent-free gap filling adhesive specifically formulated for the professional user. The product can be used to replace mechanical fixings in a wide variety of building and home improvement applications for bonding wood, brick, plaster, plasterboard, polystyrene, Styrofoam and most plastics, metals and numerous other surfaces and is designed primarily for internal use. Approximately 12 linear meters for a 6mm diameter bead.
Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.These Forgefix TechFast Roofing Sheet to Steel Screws have the following specification: Size: 5.5 x 100mmEffective Thread Length: 86mmHead Type: 8mm HexPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
Everbuild Multi Purpose Premium Joiners Grade Wood Filler is an easy to use ready mixed filler which is ideal for filling small imperfections (Max 5mm depth) in wood. Once dry, the filler leaves a sandable surface, which can be stained, painted, varnished or dyed, even with microporous stains. The filler is waterproof when dry and is suitable for exterior as well as interior applications. It is also non flammable and has a low odour. Areas For Use:Filling small holes, splits, surface imperfections and damaged areas in wood.Covering the recesses left by nails and screws. Available in 100ml Easi Squirt or 250ml tub.Everbuild Multi Purpose Premium Joiners Grade Wood Filler Colour: Medium Stainable.Size: 250ml.
Mammoth Powerful Grip Tape is a polyester fabric reinforced double-sided tape with a powerful synthetic rubber/resin adhesive designed for bonding almost any material to themselves or each other. Powerfu lGrip tape has an extremely high bond strength, can be used indoor and outdoor and is totally weatherproof when applied. BENEFITS:- Will stick to ceramics, wood, glass, plastics, brickwork, PVC etc.- Weatherproof.- Strong initial bond strength.- Will stick to porous and non-porous surfaces.This Everbuild Powerful Grip Double Sided Tape comes in the following: Size: 25mm x 2.5m.
DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade is for the cutting of rough timber, possibly with embedded nails. Specification: Blade Diameter: 190mmBlade Bore: 30mmTooth Count: 40Plate Thickness: 1.7mmKerf Thickness: 2.6mmGrind Type: ATBRake Angle: +10°
