Gewiss plastic enclosures are perfect as a day to day adaptable box, rated at IP56 it is suitable for both indoor and outdoor applications.
_Rated at IP44/IP56 meaning it's both dust and water resistant
_Available in various styles, including pre glanded entry (IP44), low lid and high lid (IP56)
_Screw down lid (except the pre glanded version, which has a push down lid)
_Constructed from technopolymer plastic to RAL7035
_Halogen free
The McAlpine TS10 75mm Water Seal Running Tubular Swivel 'S' Trap with Multifit Outlet is a plumbing accessory used to prevent foul odors and gases from escaping the drainage system. It is designed for use in various plumbing systems, including domestic and commercial applications.
The trap features a 75mm water seal and a running tubular swivel 'S' trap design. The running tubular design allows for greater flexibility in fitting and maintenance. The trap also has a multifit outlet that can be used with a variety of plumbing systems.
The McAlpine TS10 75mm Water Seal Running Tubular Swivel 'S' Trap with Multifit Outlet is easy to install and is suitable for use in sinks, baths, and other plumbing fixtures. It provides reliable protection against foul odors and gases in the drainage system.
Overall, the McAlpine TS10 75mm Water Seal Running Tubular Swivel 'S' Trap with Multifit Outlet is a useful plumbing accessory that offers flexibility in fitting and maintenance. Its multifit outlet allows for compatibility with different plumbing systems, and its running tubular design provides greater flexibility during installation and maintenance.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2002
The Arctic Hayes Tradesman's Runner is suitable for both interior and exterior work. Ideal for use in hallways and narrow passage ways. Easy to fold and store. The anti-slip mat is waterproof and washable, resistant to oil, water, bleaches, detergents and more. Supplied with a free storage bag.
The McAlpine Five 1 1/4" Rubber Washers are an essential plumbing accessory for fixing and maintaining a variety of plumbing systems. These high-quality rubber washers are designed to provide a tight and secure seal between pipes and fittings, preventing leaks and water damage.
Made from durable and long-lasting rubber material, these washers are able to withstand high pressure and temperature variations, ensuring a reliable performance over time. They come in a pack of five, making them a convenient and cost-effective solution for all your plumbing needs.
These rubber washers are suitable for use in a wide range of applications, including sink traps, waste pipes, and many other plumbing fixtures. Easy to install, they provide a quick and effective solution to prevent leaks and ensure the smooth operation of your plumbing system.
・ Mounted on Card with Hanging Slot
・ Five 1¼" Rubber Washers
・ Available in 1¼", 1½", and 2" sizes
These Forgefix, Multi-Purpose Pozi Compatible Screws feature a countersunk, pozidrive compatible, recessed head. They have a zinc yellow passivated finish offering more corrosion resistance than zinc plated products, thanks to an additional passivation process.They offer quick and easy insertion due to an extra deep insert bit recess, enabling a firmer, more positive drive. The single thread, and special wax coating, increase speed and ease of insertion. The single thread design also provides increased holding power, particularly when used with particle boards like MDF.The Forgefix screws are highly versatile and immensely popular, these single thread screws are perfect for a whole host of fixing needs, and are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.They are suitable for numerous ironmongery, joinery, electrical and plumbing applications.Supplied in a handy ForgePack.
ForgePack of 10 ForgeFix Multi-Purpose Pozi Screws CSK ST ZYP 5.0 x 40mm
These Forgefix, Multi-Purpose Pozi Compatible Screws feature a countersunk, pozidrive compatible, recessed head. They have a zinc yellow passivated finish offering more corrosion resistance than zinc plated products, thanks to an additional passivation process.They offer quick and easy insertion due to an extra deep insert bit recess, enabling a firmer, more positive drive. The single thread, and special wax coating, increase speed and ease of insertion. The single thread design also provides increased holding power, particularly when used with particle boards like MDF.The Forgefix screws are highly versatile and immensely popular, these single thread screws are perfect for a whole host of fixing needs, and are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.They are suitable for numerous ironmongery, joinery, electrical and plumbing applications.Supplied in a handy ForgePack.
ForgePack of 10 ForgeFix Multi-Purpose Pozi Screws CSK ST ZYP 5.0 x 70mm
These Forgefix, Multi-Purpose Pozi Compatible Screws feature a countersunk, pozidrive compatible, recessed head. They have a zinc yellow passivated finish offering more corrosion resistance than zinc plated products, thanks to an additional passivation process.They offer quick and easy insertion due to an extra deep insert bit recess, enabling a firmer, more positive drive. The single thread, and special wax coating, increase speed and ease of insertion. The single thread design also provides increased holding power, particularly when used with particle boards like MDF.The Forgefix screws are highly versatile and immensely popular, these single thread screws are perfect for a whole host of fixing needs, and are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards.They are suitable for numerous ironmongery, joinery, electrical and plumbing applications.Supplied in a handy ForgePack.
ForgePack of 40 ForgeFix Multi-Purpose Pozi Screws CSK ST ZYP 3.5 x 20mm
Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.These Forgefix TechFast Roofing Sheet to Steel Screws have the following specification: Size: 5.5 x 25mmEffective Thread Length: 11mmHead Type: 8mm HexPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny.Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face.APPLICATION:On all manner of bolting applications.Can be used with all types of bolts and nuts.Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Supplied in a handy ForgePack.
ForgePack of 20 ForgeFix Flat Penny Washers ZP M8 x 25mm
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every tub is supplied with a Torx® compatible bit.Size: 5.0 x 70mm.Pack quantity: 450.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is salt spray tested to 400 hours. The screws are suitable for interior and exterior use. Every tub is supplied with a Torx® compatible bit.Size: 4.0 x 60mm.Pack quantity: 700.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.Available in standard sizes, from 25mm to 150mm. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Round Head Nail Galvanised Finish 75mm Bag of 2.5kg
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 75mmEffective Thread Length: 58mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every tub is supplied with a Torx® compatible bit.Size: 5.0 x 90mm.Pack quantity: 350.
The McAlpine CWS70-CB 1½" Plastic Bath Waste is a plumbing component designed to connect a bath to a waste pipe. This waste is designed with a centre pin model and a 70mm chrome plated brass flange that is designed to fit over the bath outlet and provide a secure and leak-free seal. The flange also provides a sleek and modern appearance to the bath.
The waste features a 60mm tail with a spring-loaded mushroom plug that prevents debris and other materials from entering the waste pipe, preventing blockages and maintaining the flow of water. The centre pin design of the CWS70-CB allows for easy installation and removal of the waste plug.
The CWS70-CB is suitable for use with baths with a 1.1/2" BSP (British Standard Pipe) outlet. The waste is made from high-quality materials, ensuring that it is durable and long-lasting even in challenging plumbing environments.
Overall, the McAlpine CWS70-CB 1½" Plastic Bath Waste is a reliable and stylish plumbing component that can help you to connect a bath to a waste pipe. Whether you are working on a large-scale plumbing project or a small DIY job, this waste can help you to ensure that your plumbing connections are secure and leak-free while maintaining a modern and sleek appearance.
・ 1½" BSP
・ Spring loaded mushroom plug
・ 70mm flange
・ 60mm Tail
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
Forgefix Countersunk Torx® Compatible Head Lightening Bolts provide a virtually stress free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The Torx® compatible head provides increased control, and is countersunk to sit flush to the surface of the material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications:Size: M6 x 75mm.Bag of 10.
These Forgefix Double Cliplock Pipe Clips are made from heat-resistant polypropylene, designed to withstand the temperature changes in central heating systems, and are effective with temperatures of up to 100°C (most pipes in domestic central heating systems operate at around 70°C). APPLICATION:Used when fitting most types of pipe work. Polypropylene, also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.Pipe Clip Double Cliplock 15mm Box 50
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 12mm.Box quantity: 200.
The ForgeFast Decking Screws Countersunk TORX® T25 are suitable for fixing into softwood or hardwood. They have a deep TORX® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn and the recessed under-head ribs provide superb countersinking. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35mm, reducing likelihood of screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.ForgeFast Decking Screws Countersunk TORX® T25 Size: 5.0 x 100mmPack Size: Tub of 300Finish: Green elementech 2000
These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Felt Nail Galvanised 13mm Bag Weight 2.5kg
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 8 Box 200
Connectors for use with grease guns.LUMATIC GREASE GUN CONNECTORSlide-on connector for use with both standard and industrial type hook-on grease nipples.1/8in BSP Thread Connection.
These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.Oval Lost Head Nail Bright 75mm Bag Weight 500g
These ForgeFix Phillips Baypole Screws with wafer head are specifically designed for joining PVCu sections, particularly in bay windows. The nails have a self-drill tip and are zinc plated for increased corrosion resistance and durability. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. APPLICATION:The large wafer head distributes the load on numerous types of PVCu sections requiring joining. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets too strong for the tip, the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. A self-drilling screw is similar to a sheet metal screw, but it has a drill-shaped point to cut through the substrate to eliminate the need for drilling a pilot hole. Designed for use in soft steel or other metals.Head: Wafer HeadFinish: Zinc PlatedSize: 4.8 x 60mmPack: Box 100
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every tub is supplied with a Torx® compatible bit.Size: 4.0 x 70mm.Pack quantity: 600.
This ForgeFix ForgeFast Torx® Compatible Wood Screw Pack contains a selection of the most popular sizes of professional, high performance multi purpose woodscrews. With a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power.The patented drill and drive thread reduce splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel.With an 'Elementech 400' coating providing an anti-corrosive metal finish which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours.Contains:1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.0 x 25mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.5 x 30mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.5 x 40mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 30mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 40mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 50mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 50mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 60mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 70mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 80mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 100mm.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.5 x 70mmThread: 42mm lengthPack Quantity: Box of 100
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm². It offers simplified insertion of single wires for stripping using location ridges, easy insertion of coax and data cable thanks to spring opening aid. Its multi-component design with a soft plastic zone allows for comfortable use and a secure grip. The housing is made from stable glass fibre reinforced plastic. Specification: Wire Stripping Capacity:- Round Cable: 8-13mmConductors & Stands: 0.2-4.0mmData Cable: CAT 5-7, Twisted Pair (UTP/STP)Coax Cable: 4.8-7.5mmOverall Length: 135mmWeight: 95g1 x Knipex ErgoStrip® Universal Stripping Tool - Left Handed
The Knipex Precision ESD Electronics Side Cutters are fitted with electrically discharging handles (dissipative). They provide an optimised flush cutting result in soft materials and are perfect for installations with tight tolerances and for precise configuration of wire ends. These pliers are 20% lighter than conventional electronics pliers and are fitted with ergonomically optimised multi-component handles. The extremely precise ground and sharp cutting edges are perfect for exact cutting on delicate electronic components and the cutting edges have been additionally induction hardened to approx. 64 HRC. Cutting blades are made of high-quality ball bearing steel with a polished finish and have been processed with the highest degree of care. They have a bolted joint that has carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Each opening movement is gentle and even without backlash, thanks to the smooth-running double spring. Each work step proceeds reliably and precisely. This makes work much easier for professionals. Specification Length: 125mm.Cutting Capacity: Soft Wire: 0.1-1.3mm.Weight: 58g.
The Knipex 13-6 Series StriX Insulation Stripper with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The knurled screw and lock nut provide easy adjustment to the required diameter of solid or stranded wire. Also fitted with a shear blade for cutting copper cable up to 15mm (5 x 2.5mm²) and a bolted joint for precise operation with zero backlash. The pliers have a slim design for easy access. Ideal for single, multiple and fine stranded conductors with plastic or rubber insulation, max 5.0mm or resp. 10mm² cable cross section. Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11mm and 16mm). Specification Stripping Capacities: Diameter: 5mm/10mm², AWG: 7Length: 180mm
Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in a tool roll, made of hard-wearing polyester fabric with practical, adjustable quick release fastener. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 48 21 J11 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 21 J21 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 49 11 A1 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 11 A2 External Circlip Pliers for Shafts Ø 19-60mm. 1 x 49 21 A11 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 21 A21 External Circlip Pliers for Shafts Ø 19-60mm.
Knipex StepCut Cable Shears for cutting multi-core stranded copper and aluminium cables. They can also cut solid copper and aluminium cables up to 5 x 4mm². Not suitable for steel wire and hard drawn copper conductors. Made from forged, oil-hardened special tool steel with a chrome plated finish. The cutting edges are additionally induction-hardened, approx. 56 HRC. Cuts without crushing. Noticeably less effort: the gradations cut wires one after the other; cutting is up to 40% easier than with standard cable shears of the same length. Its multi-component grips are VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The ergonomic handle design provides optimal cutting feel, even for larger cable diameters. A pinch guard prevents operators' fingers being pinched. Specifications: Cutting Capacity: Multi-core Stranded Copper/Aluminium Cables: 50mm²/ Ø 15mm.Length: 160mm.
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1630135 are ideal for stripping, dismantling round PVC, rubber, silicone, PTFE cables from 6.0 - 29.0mm dia. There is a self-cocking holding lever to hold cable securley and a knurled nut for cutting depth adjustment. The Knipex KPX1630135 can be changed from circular to longitudinal cutting, simply by turning the tool body, and spiral cutting for longer stripping areas. knipex have made the body of the tool from shock-resistant plastic for added safety and the blade is changeable. Stripping capacities Ø 1/4 - 1 5/32 inchesLength 5 5/16 inchesWeight 4.2 ounces
Knipex 71 32 200 CoBolt Compact Bolt Cutters made with precision cutting edges for soft, hard and piano wire. Induction-hardened for added strength and durability, edge hardness approximately 64 HRC. An efficient joint design ensures exceptional cutting performance with little effort. They also have a gripping surface below the joint for gripping and pulling wires from Ø 1.0mm. A recess allows for easier cutting of thicker wires. Fitted with ergonomic multi-component grips for added grip and comfort. An opening spring and locking device are integrated in the handles for comfortable work and safe transport.Specification:Length: 200mm.Cutting Capacity: Medium-Hard Wire 5.2mm, Hard Wire 4mm, Piano Wire 3.6mm.
