Solvite All Purpose Wallpaper Adhesive is extra strong for reliable, long lasting results. It has a fast mix formula for quick and easy preparation. Extra strong, smooth lump free formula, fast 20 second mix and ready to use in under 2 minutes. For hanging washables, vinyls, lining paper and embossed paper.Size: 5 Roll.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 6.0mm.Working length: 57mm.Overall length: 93mm.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inDiameter - 1/8in 3.2mmCutting Length - 3/8in 9.5mmT.C.T. 2 Flutes.
The Stabila Series 80U-2 Spirit Level has a rectangular aluminium profile with a powder coating that protects sensitive surfaces. The spirit level is easy to clean due to its smooth surfaces and an electro-static powder coating in anodised colour. There are two vertical vials for quick and easy reading in any position, and one horizontal. The levels are firmly fitted with impact-resistant plastic end caps. The patented STABILA vial system ensures long-lasting accuracy and offers precise measurement even for heavy-duty tasks. Especially for carpenters and cabinet makers, electro installers, tilers, and plumbers. Perfect measuring tool for DIY. Specification Normal Position Accuracy: ±0.5 mm/m.Overhead Position Accuracy: ±1.0mm/m.3 Vials: 1 Horizontal and 2 Vertical.Measurement: 1 Coated Measuring Surface.Stabila 18791 80U-2 Spirit Level 3 Vial Length: 150cm (60in).
The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.RIDGID Aluminium Straight Pipe Wrench Size: 250mm (10in)Capacity: 40mm (1.1/2in)Weight: 0.4kg
The Dormer A110 Metric Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to: DIN 340RN/BS328/ISO 494.
The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 133 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 12.7 mmD = 38 mmC = 19 mmBearings = 9.5 and 12.7 mm
The ABUS 55 Series Brass Padlocks have inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available.This ABUS 55/40 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 4. Shackle Width: 21mm.Shackle Height: 22mm.Shackle Diameter: 6.5mm. Overall Width: 38mm.Overall Height: 60mm.Overall Depth: 13mm.
Designed for optimised performance on stainless steel tube, the Ridgid 35S cutter has six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.An ergonomic knob allows for easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut. Capacity: 5-35mm.
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 4.8 mmD = 22 mmC = 12.7 mmBearings = 9.5 and 12.7 mm
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/2in Shank.A = 45° C1 = 19 mmC2 = 26 mmD = 51.5 mmB = 12.7 mm
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/40 Brass Padlock has the following specification: ABUS Security Level: 5.Keyed Alike Key Reference: 406. Shackle Width: 22mm.Shackle Height: 22mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
Bahco Combination Pliers with ERGO™ handles that can be used for both holding and cutting. The jaws are slimmer than standard products, have smooth rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. These pliers are also fitted with a return spring which can be engaged or disengaged in an instant.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 36mm.Cutting ;Capacity: ;Piano: 2.0mm, Hard: 2.5mm.Weight: 245g.
The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification Capacity: 12-32mm (1/2-1.1/4in).Length: 240-425mm (10-17in).Weight: 1.2kg (2.5lbs).
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.C = 50 mmD = 12.7 mm 1/2 inD = 12.7 mm.C = 50 mm.
The RIDGID Inner-Outer Reamers have a hardened steel construction and are suitable for cutting copper and stainless steel tubing. They have 46 cutting edges on the interior cone that allow for fast, clean, inner reaming and outer deburring/bevelling of 1⁄4in (6mm) to 2in (50mm). The reamers have dual inch/metric measurement bars.RIDGID 227S Inner-Outer Reamer Capacity: 12-54mm (1/2 - 2in).Weight: 0.56kg.
Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort.1 x Bahco 2171G Side Cutting Pliers 180mm (7in)
Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has a easy to read triple scale bar in psi and kPa scales and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems. Can be left on test, while flooring is laid to reveal any nail damage also test hot and cold supplies separately to ensure pipes are not crossed. The Monument 1512 is fitted with a Schrader Valve and 15 mm push fit fitting for quick and easy assembly and has a rubber boot for added protection.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size: 3.0 x 61mm.PVC Tube.
The Metabo HSS-CO Drill Bit Set is suitable for drilling in steel, VA-steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm² tensile strength. The bits are made from a cobalt alloy with a ground, cylindrical, type N 135° crosswise grinding tip and bronze coloured surface finish. They are supplied in a metal tin and it contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 & 10mm.
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Supplied complete with appropriate size tapping drill.Size 10 (3/16) UNF x 32TPILength 1/1/2D
The RIDGID K-400 Drum Machine offers several unique, user-friendly features to make the toughest drain cleaning jobs easier and hassle-free. Designed with a sleek profile, the Model K-400 is a great fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies. The integrated transport cart allows for easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs. There is also an integrated telescoping handle that provides high-handle height during transport. It is fitted with AUTOFEED®, a patented, automatic cable feed that powers the cable in and out of the drain. Reverse the direction of the Autofeed and the cable feeds back into the drum A cable control system causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to the operator when blockages are encountered. Solid Core Cable uses a tough 3⁄8in (10mm) Integral Wound (IW) cable that is rugged and kink resistant. Comes with 1 x C-32IW 3/8in (10mm) x 75ft (23m) Integral Wound Solid Core Cable, 1 x Pair of Gloves, 1 x T-260 Tool Kit (T-202 Bulb Auger, T-205 C Cutter, T-211 Spade Cutter & A-13 Pin Key) and 1 x AUTOFEED® Attachment. Specification Input Power: 380 Watt, 230/240 Volt. Cable Spin Speed: 165 RPM.Drum Capacity: 3/8in (10mm) Diameter Cable: 100ft (30.5m). Length: 24in (61cm).Height: 23in (58.5cm).Width: 17in (43.2cm).Weight Machine Only: 20.4kg.Cable Weight: 11.8kg.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 180 x 22 x 36g.Coarse
Faithfull Professional quality hexagon keys made from fully hardened chrome vanadium steel. All keys from 4mm (5/32in) have chamfered edges to prevent damage to blade and fittings. All keys 3mm (1/8in) and above are marked with their size.Size. 0.035 AF.
The DEWALT PU Comfort Insoles are universal cut to fit size, up to a UK Size 12. They feature a moisture wicking system and are anti-bacterial to reduce odour. They have a perforated design for breathability and offer a high degree of cushion comfort including arch support. Suitable replacement for all DEWALT safety footwear, up to a UK Size 12.
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.1 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 425mm (17in).Strap Width: 12mm (1/2in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 90mm (3.1/2in).Weight: 0.5kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
These Scan FPP2 moulded disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself. They are ideal for use with:- Brick dust- Concrete and Plaster- Hand sanding of wood and MDF- Masonry and metal working with power tools (not welding)- Loft insulation With a FPP2 protection level, these masks are suitable for protecting from particles between 2 and 5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on all protection levels, please see below. The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift. The masks conforms to EN149:2001 and A1:2009. Disposable Mask Protection Levels: FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mistsEN149 Filtering Face Piece for ParticulatesThese SCAPPEP2M Moulded Disposable Masks are supplied in a pack of 3.
This Pest-Stop high quality Mink Cage is a traditional device for the humane trapping of mink or other similar sized pests. This type of cage is exclusive to Procter Pest-Stop. The cage is made from galvanised steel to resist rust, and has a carry handle on the top of the cage for easy transportation. It is ready to use and comes complete with detailed instructions for use. The trap works by placing bait on or close to a plate inside the trap. When the intruder touches the plate, the trap is activated and the doors close, trapping the animal inside. Please note: It is illegal to release captured live mink back into the wild. Therefore the captured mink should be humanely killed. For further information on this, contact DEFRA or the RSPCA.
The DEWALT Newark Waterproof Safety Hiker Boots have a full grain leather upper with a Samsung waterproof and breathable membrane and a PU comfort insole. The TPU sole is resistant to petrol, chemical’s, oil and temperatures up to 120°C. It also features an anti-Scuff toe guard. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 Joules. There is also a steel midsole for underfoot protection. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3 WR.Slip Rating: SRA.The DEWALT Newark S3 Waterproof Safety Hiker Boots have the following specification: Colour: Brown.Size: UK 7 Euro 41.
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, and a strap designed for use with plastic pipe.RIDGID No.5P Strap Wrench has a strap designed for use with plastic pipe. Handle Length: 450mm (18in).Strap Length: 750mm (29.1/4in).Strap Width: 45mm (1.3/4in).Rated Pipe Capacity: 125mm (5in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 1.0kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
The Sievert Needle Flame Torch Kit is ideal for Jewellery, lead welding and modelling. It contains the following: 1 x 3486 Handle.1 x 3501 Neck Tube.1 x 8842 Burner.1 x Hose Failure Valve.1 x 4 Metre Hose. Single valve handle mainly for smaller burners. The spindle and valve are designed to give a very exact and quick flame setting. It has an ergonomically designed plastic composite handle and all metal parts.
Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from wood, metal and plastic.Set of 2 bits can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-wing, Frearson and most Tamper Resistant Screws.
