The Bosch GMS 120-27 Professional Detector helps you detect and locate metals, live wires, and wooden studs in dry walls. Locating objects in walls before drilling provides increased safety on the job, especially for craftspeople doing renovation work when fitting cabinets, kitchen counters, washbasins, boilers, and heating systems, or installing A/C and sprinkler systems.Not only does this scanner identify the center of the detected object, it also indicates its material characteristics such as whether the object is magnetic or non-magnetic metal, a live wire, or non-metallic.Detection results appear via signal indication on the display and the colour-coded marking hole. The easy-to-use detector offers simple mode selection, and you can mark exactly through the marking hole where objects have been detected. The robust GMS 120-27 was developed for tough job sites with IP54 dust and splash water protection, plus a shock-absorbing rubber casing.Supplied with: 1 x Pouch and 2 x 1.5V LR6 Batteries (AA).Specifications:Power Supply: 2 x 1.5 V LR6 (AA), 2 x 1.2 V HR6 (AA) or 1 x BA 3.7V 1.0Ah Li-ion BatteryMax. Detection Depth: 120mmMax. Detection Depth Magnetic Metal/Non-magnetic Metal: 100mm/120mmMax. Detection Depth Live Cables: 50mmMax. Detection Depth Wooden Substructures: 30mmDust and Splash Protection: IP54Weight: 0.29kg
7 Piece Bosch Mini-X-Line Masonry Drill Bit Set. Suitable for drilling in masonry, sand lime bricks, natural stone and cast stone. Supplied in a practical Bosch X-Line case for a clear layout of the contents.Contains: 7 x CYL-1 Masonry Drill Bits: 3, 4, 5, 5.5, 6, 7, 8mm.
15 Piece Bosch Mini-X-Line Twist Drill Bit Set for drilling in wood, masonry and metal. Suitable for all handheld and stationary drills.Supplied in a practical Bosch X-Line case for a clear layout of the contents. Contains:5 x Twist Drill Bits for metal, plexiglass and plastics. Size (Ø): 3, 4, 5, 6, 8mm5 x CYL-1 Masonry Drill Bits for masonry, sand lime bricks, natural stone and cast stone. Size (Ø): 3, 4, 5, 6, 8mm5 x Brad Point Drill Bits for hard wood, soft wood and plastic. Size (Ø): 3, 4, 5, 6, 8mm
The Bosch CYL-3 Drill Bit provides lasting performance when drilling in concrete. Its effective 2-flute U-shape design provides good dust removal, reducing friction and extending lifetime. Suitable for drilling holes for fixings in abrasive materials such as concrete and natural stones.PGM guarantee in compliance with tight tolerances, exactly drilled holes and firm hold of fixings. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings.Compatible with cylindrical shank systems for all corded or cordless impact drills.
The Bollé Safety COBRA Safety Glasses offer a 180 degree panoramic visual field with perfect optical quality. Fitted with a non-slip nose bridge and comfortable, non-slip straight temples. The glasses have removable temples to allow easy transformation into safety goggles by attaching a foam and strap kit (BOLKITCOBRA). This means that Cobra is an ultra-versatile model.These Bollé Safety COBRA Safety Glasses have CSP lenses with a PLATINUM anti-scratch and anti-fog coating. They are recommended for use in extreme hot or cold conditions. Ideal for cold and hot countries, from the Far East to Siberia! CSP technology also filters blue light. Specification: Lens Marking: EN 172 Solar 5-1,4Frame Marking: EN166 1FT KNCoatings: PLATINUM Anti-scratch/Anti-fog
The Enclosed Mouse Trap is a hygienic and cost effective trap. No poisons are used and the high quality trap can be used again and again. Alternatively, simply dispose of the box with trap, if you prefer. Ideal for use where children and pets are present.Trap contained within safe box.Easy disposal.Re-usable box with key and trap.Always read the label and product information before use.This product can be used indoors.Place the trap on a flat surface along walls and skirting boards where mice have been seen, with the entry hole nearest the wall.Pack of 2
The Bosch GDR 12V-105 Professional Impact Driver is the shortest cordless impact driver in its class. The compact design provides optimum handling, especially when driving screws overhead and working in tight spaces. The powerful motor provides high-speed for fast working and features Electric Motor Protection (EMP) to protect against overload. With forward and reverse rotation for inserting and removing screws. It is fitted with an ergonomic soft grip for optimum handling and an LED light, ideal when working in dark spaces. Specification: Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,600/min.Impact Rate: 0-3,100/bpm.Max. Torque: 105Nm.Weight: 0.96kg incl. battery.
Bosch GDS 18V-330 HC Professional Impact Wrenchwith a 1/2in square bit holder. Delivers powerful performance whilst preventing damage to materials. Two default modes on the user interface, selftapping screw (A) and wood screw (B), mean more control and less broken or stripped off screwheads, worn-out threads, and damaged workpieces by slowing down or shutting off the impact driver. Each mode is customisable via the Bosch Toolbox App. Three speed/torque settings ensure impressive control and greater flexibility on the job. Comes with a status indicator, LED light, and belt clip for greater convenience. Ideal for metal workshops/locksmiths, industrial assembly, framing, and vehicle maintenance using metal bolts/nuts from M8-M18. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Tool Holder:1/2in square.No Load Speed: 0-1,200/0-1,900/0-2,800/min.Impact Rate: 0-2,400/0-3,100/0-3,800/bpm.Max. Torque: 200/260/330Nm.Max. Breakaway Torque: 560Nm.Bolt Size: M8 - M18.Weight: 1.2kg excl. battery.
The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes. The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.The Irwin IRW10502798 Brad Point drill bit has the following dimensions:Drillbit diameter: 12.0mmTotal length: 145mmWorking Length: 100mm
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 20
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 30
JG Speedfit equal straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Box of 50 MasonMate Rubber Nuts M6 x 25mm. The MasonMate Rubber Nuts have a brass insert. Can be used in virtually any construction material. Ideal for use in damp and sanitary conditions. M6 x 25mm (50)
The Unifix Supertite Thread Forming Screws are designed for reliable fastening in metal applications. With a hex washer head and a size of M6 x 25, these screws ensure a secure fit and are ideal for various projects.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Hex Washer Head for Enhanced Grip
Thread Forming Design for Easy Installation
Perfect for Metal Applications
Complies with DIN Standards for Quality Assurance
The Fiskars UP53 Anvil Tree Pruner has a long reach shaft that makes hard to reach garden tasks accessible from a safe standing position. The anvil cutting action is ideal for cutting dry and hard wood. It has a vertical cutting reach of approximately 3.5 meters and an adjustable cutting angle up to 26°. Specification Cutting Capacity: 32mm.Vertical Cutting Reach: 3.5m.Length: 1610mm.Weight: 770g.
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducing straight connector push-fit fitting for the connection of two equal pipe sizes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing straight connector push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Pack of 2
Fiskars CarbonMax Snap-off Knife Blades feature Fiskars proprietary, edge-retention coating which stays sharp up to 24x longer than standard utility blades. The blades have been extensively laboratory tested and verified. Pack of 5 Fiskars CarbonMax Snap-off Knife Blades 18mm.
The Raaco 1224-02 Metal Cabinet has 24 x 150-02 drawers, each drawer can be divided into 3 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 24 x 105-02 (64 x 91 x 154mm).
A robust, solid forged Kent & Stowe Round Nosed Shovel with an extended shank for improved strength, as well as having a larger tread edge for added comfort. Its handle is made from beautiful FSC® approved ash wood that has been split to form a traditional YD handle. Ideal for use in large soil areas, it can be used for digging, soil turning and improving drainage in harder to work soil. Comes with a 10-Year Guarantee. Specification: Length: 110cm
These Starrett Bi-Metal King Cut™ Reciprocating Blades have the following specification: ID: BR81014-5Application: Rescue & DemolitionApplication Material Thickness: 4-10mm (5/32-3/8in)Dimensions: 203 x 19 x 1.30mm (8 x 3/4 x 0.050in)TPI: 10-14Blade Shape: StraightPack: Plastic TubePack Quantity: 5
The DEWALT DW088K 2 Way Self-Levelling Line Laser is accurate to ±0.3mm/m in levelling applications. Self-levelling up to 4° surface angle with automatic out of level indication. It uses a simple 2 button operation with a low battery indication for ease of use. The built-in magnetic pivot bracket mounts easily on metal surfaces, whilst the over moulded housing and thick glass protects the tool and helps maintain calibration under jobsite conditions. The included kit box helps to protect the unit and helps maintain calibration when stored in gang box. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 3 x AA Batteries. DW088K: Laser ONLY.DW088KD: Laser & Detector.The DEWALT DW088K 2 Way Self-Levelling Line Laser is supplied with: 1 x Wall Mount Bracket1 x Heavy-Duty Carry Case3 x AA Batteries
The Vortex High-Performance Multi-Purpose Woodscrews are designed for a variety of woodworking applications. With a size of 4.5 x 40mm, these screws provide exceptional strength and durability.
High-Performance Design: Engineered for optimal performance in various wood types.
Versatile Use: Suitable for both indoor and outdoor projects.
Easy Installation: Sharp tips and deep threads ensure quick and secure fastening.
Corrosion Resistant: Coated to withstand moisture and prevent rust.
Reliable Quality: Manufactured to meet CE standards for safety and reliability.
The Vortex High-Performance Multi-Purpose Woodscrews are designed for a variety of woodworking applications. With a size of 3.5 x 12mm, these screws provide excellent grip and durability.
High-Performance Design: Engineered for strength and reliability.
Versatile Use: Suitable for various woodworking projects.
Easy Installation: Designed for quick and efficient use.
Durable Material: Made to withstand wear and tear.
CE Marked: Complies with European safety standards.
The Unifix Wing Nuts Bright Zinc Plated UNI 5448 - M6 x 1.00 are designed for easy fastening and secure connections. Made from high-quality materials, these wing nuts are perfect for various applications.
Durable Bright Zinc Plated finish for corrosion resistance
Easy to install with hand-tightening feature
Compatible with M6 threaded rods and bolts
Ideal for both DIY and professional use
Lightweight design for versatile applications
The Unifix Twinthread Woodscrews are designed for reliable fastening in wood applications. With a Pozi round head and a zinc-plated finish, these screws provide excellent corrosion resistance and strength.
High-Quality Twinthread Design for Enhanced Grip
Pozi Round Head for Easy Installation
Durable Bright Zinc Plated Finish for Corrosion Resistance
Perfect for Various Wood Projects
Size: 8G x 5/8" (4.0 x 16Mm)
The Unifix Twinthread Woodscrews are designed for reliable fastening in wood applications. With a Pozi round head and a zinc-plated finish, these screws provide excellent corrosion resistance and strength.
High-Quality Twinthread Design for Enhanced Grip
Pozi Round Head for Easy Installation
Durable Bright Zinc Plated Finish for Corrosion Resistance
Perfect for Various Wood Projects
Size: 8G x 1/2" (4.0 x 12Mm)
The Unifix Twinthread Woodscrews are designed for reliable fastening in wood applications. With a Pozi round head and a zinc-plated finish, these screws provide excellent corrosion resistance and strength.
High-Quality Twinthread Design for Enhanced Grip
Pozi Round Head for Easy Installation
Corrosion-Resistant Bright Zinc Plated Finish
Perfect for Woodworking and General Repairs
Size: 6G x 1/2" (3.5 x 12mm)
The Unifix Twinthread Woodscrews are designed for reliable wood joinery. With a Pozi round head and a zinc-plated finish, these screws provide excellent grip and durability.
High-Quality Twinthread Design for Enhanced Grip
Pozi Round Head for Easy Installation
Zinc-Plated Finish for Corrosion Resistance
Perfect for Various Wood Projects
Size: 6G x 1.1/4" (3.5 x 30mm)
Unifix Twinthread Woodscrews are designed for superior grip and strength in wood applications. These screws feature a Pozi Countersunk head for easy installation and a Bright Zinc Plated finish for corrosion resistance.
High-Quality Twinthread Design for Enhanced Grip
Pozi Countersunk Head for Easy Driving and Reduced Cam-Out
Bright Zinc Plated (BZP) Finish for Corrosion Resistance
Perfect for Wood Applications, Ensuring Strong Joints
Available in Convenient Boxed Packaging for Easy Storage
The Unifix Twinthread Woodscrews are designed for reliable fastening in wood applications. With a Pozi Countersunk head and a Bright Zinc Plated finish, these screws provide excellent grip and durability.
High-Quality Twinthread Design for Enhanced Grip
Pozi Countersunk Head for Easy Installation
Bright Zinc Plated (BZP) for Corrosion Resistance
Perfect for Various Wood Projects
Size: 12G x 1.1/4" (5.5 x 30mm)
The Unifix Twinthread Woodscrews are designed for reliable wood joinery. With a Pozi Countersunk head and a Bright Zinc Plated finish, these screws provide excellent grip and durability.
High-Quality Twinthread Design for Enhanced Grip
Pozi Countersunk Head for Easy Installation
Bright Zinc Plated (BZP) for Corrosion Resistance
Perfect for Various Wood Applications
Packaged in a Convenient Box for Easy Storage
The Unifix Twinthread Woodscrews are designed for reliable fastening in wood applications. With a Pozi Countersunk head and a Bright Zinc Plated finish, these screws provide excellent grip and durability.
High-Quality Twinthread Design for Enhanced Grip
Pozi Countersunk Head for Easy Installation
Bright Zinc Plated (BZP) for Corrosion Resistance
Perfect for Various Wood Projects
Available in Convenient Boxed Packaging
The Unifix Table 3 LP Washers BS 3410 HV140 Bright Zinc Plated - 5/16" are designed for reliable fastening in various applications. These washers provide excellent support and stability for your projects.
High-Quality Material: Made from Bright Zinc Plated for durability and corrosion resistance.
Standard Size: 5/16" diameter, suitable for a wide range of uses.
Compliant with BS 3410: Ensures reliability and safety in applications.
Easy to Install: Designed for quick and efficient installation.
Versatile Use: Ideal for securing components in construction and DIY projects.
