The Makita DHR202RF SDS Plus LXT Rotary Hammer Drill is capable of drilling through steel, wood and masonry with ease. The chisel can rotate a full 360° with 40 different locking positions. With 3-modes of operation: Rotary drilling, Hammer drilling or Chiseling. Fitted with high comfort grips for maximum user comfort and a conveniently located push-button for forward and reverse. Fitted with an LED job light with afterglow and a one-touch sliding chuck for easy bit changes. The 22 minute charge time with the air-cooled Makstar Optimum Charging System. Lithium-ion’s 40% weight saving means 18V power can be obtained by a battery that weighs the same as a 12V NiMH battery. They have a greater life span than their NiMH or NiCad counterparts giving 430% greater run time. Specification: No Load Speed: 0-1,100/min.Impact Rate: 0-4,000/bpmImpact Energy: 2.0 joulesCapacity: Concrete 20mm, Steel 13mm, Wood 26mm Weight: 3.2kgThis Makita DHR202Z SDS Plus Rotary Hammer comes as a bare unit, NO battery or charger supplied.
This Stanley Seam Roller has a rubber roller head which gives a great finish when smoothing wallpaper seams. It has a soft DynaGrip handle for extra comfort and control.
The Faithfull DWHAND is a lightweight hand sander which is extensively used in the dry walling industry for sanding the joints between plasterboards after they have been filled.The sander has a comfortable soft-grip handle and features a foam backing pad and easy clip paper release system that ensures the abrasive paper is securely held in position, but also makes changing the paper sheet easy.The large handle provides a secure grip to help maximise control and efficiency, the large sanding surface make this product ideal for all flat sanding applications around the workshop or home and is designed for use with 280mm x 85mm sanding sheets.
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.2Blade Length 250mm (10 in)
The Trend Door Lifter is manufactured from a very durable plastic and has a non-marking base. It stays flat and stable until the user is ready to lift the door with their foot. The Door Lifter has a cam design with an internal weight to keep it level. It is ideal for hanging doors with any type of hinge and can lift a door up to 38mm high with maximum weight of over 100Kg. A useful hanging hole enables easy storage.
The Stanley FatMax® Bent Snipe Nose Pliers are made from heat treated high chrome steel forging for long life and durability. With a high frequency heat treated cutting edge for accuracy. Interlocking joint assembly for smooth cutting. Fitted with bi-material handles with secure grip grooving. The long, half round section gripping jaws are ideal for forming loops with wire or thin strips of metal.1 x Stanley FatMax® Bent Snipe Nose Pliers 160mm (6.1/4in)
The Trend DAF/8 Digital Angle Finder has a large LCD display with digital readout to allow easy reading of angles. It calculates angles from 0-220° and up to 360° when the locking knob is removed. Ideal for measuring internal and external angles quickly. The angle finder has a large aluminium stock for stability and accuracy and a robust yet lightweight aluminium construction butt. The 50mm wide blade with locking function has a dual metric/imperial scale and a 90° angle check on the end of the blade. The angle finder is easy to operate with 3 buttons - on/off, hold and zero/ABS. When used in ABS mode, the readout always reads correctly. In addition, it has a spirit level vial. Resolution: 0.05°/ 3 minutes.Measuring range: 0.0°-220.0°Accuracy: 0.15°.
These Vitrex Essential Tile Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. Supplied in a resealable bag.The Vitrex 102000 Essential Tile Spacers have the following specifications: Size: 2mm. Pack quantity: 500.
The Energizer® CR1620 is a 3 Volt Lithium coin cell from Energizer. It is 16mm in diameter and 2.0mm thick, weighs 1.3g and has a capacity of 85.0mAh Reliable, dependable power. Used in heart rate monitors, keyless entry, glucose monitors, toys and games. Replaces: 1620, CR1620, DL1620, ECR1620, L08.
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 8 Euro 42
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 30mmLength: 78mm
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. It's 3-position pendulum action controls the aggressiveness or smoothness of cuts. The tool free adjustable shoe with anti-scratch cover bevels 45°, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. It's modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris. DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries. DCS331N: Bare Unit, No Battery or Charger. Specification Strokes No Load: 0-3,000/min.Stroke Length: 26mm.Bevel Capacity: 45°.Capacity: Wood: 135mm, Metal: 10mm.The DEWALT DCS331M2 XR Premium Jigsaw 18V is supplied with: 2 x 18V 4.0Ah Li-ion Batteries.1 x Anti-Scratch Shoe Cover1 x Dust Port1 x Multi-Voltage Li-ion Charger1 x Heavy-Duty Kit Box
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.Diameter: 12mm
The BlueSpot Broad Buddy Pocket Tape has an extra wide steel blade with easy-to-read metric and imperial graduations. With a rubberised, impact resistant case for increased comfort. Its rubber casing improves strength and durability, and it has a strong belt clip to keep it conveniently to hand. A powerful lock holds the blade in position.This BlueSpot Tools Broad Buddy Pocket Tape has the following dimensions: Blade Length: 8m/26ftBlade Width: 32mm
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502819 Blue Groove 4x flat bit has the following specific dimension:Diameter: 30mm
Pair of P3(R) filters for the Trend AIR STEALTH half mask. The twin HEPAC* pleat encapsulated filter design provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above. *High Efficiency Particulate Air Composite
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/60 Brass Padlock has the following specification: ABUS Security Level: 6.Keyed Alike Key Reference: 6601. Shackle Width: 33mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 60mm.Overall Height: 97mm.Overall Depth: 19mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
The Metabo ASR 35 M ACP All-Purpose Vacuum offers high user protection: certified in accordance with EU standard for M Class dusts. It is ideal for dust extraction from power tools in continuous mode, both on construction sites and in the workshop. Especially suited for extracting concrete and rock dust. Suitable for liquids and dry solids with commercial registration. AutoCleanPlus: saves both cost and time thanks to automatic MPulse filter cleaning during continuous use. If the optimum suction performance falls below a certain level, the filters are vibrated immediately. It also automatically shuts down once the maximum fill level is reached when vacuuming liquids. Automatic trailing mechanism for emptying the suction hose completely. It has a sturdy design thanks to especially large wheels and castors with wheel stop. The body features include: cable winding mechanism, practical accessory case and storage area, and a power socket for use with a power tool with automatic start-up/shut-down. Supplied with: 1 x 4m Anti-Static Suction Hose Ø35mm1 x 48mm Connection Bush Ø41mm1 x Handle Adaptor2 x Plastic Suction Pipes2 x Polyester Filter Cassettes (M Class)1 x PE Filter Bag1 x Crevice Nozzle1 x Floor Nozzle Ø300mm Specification: Input Power: 1,400WCapacity: Wet/Dry: 35 litresMax. Air Flow: 4,380L/min.Vacuum: 248m/barSuction Hose Diameter: 35mmWeight: 16kg1 x Metabo ASR 35 M ACP All-Purpose Vacuum M Class 110V Version
Tacwise galvanised narrow crown staples, ideal for a wide variety of 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler and other major brands in the market.Size: 15mm.Pack quantity: 1000.
The Bahco 4750-HDLB-1 Heavy-Duty Part Leather Belt has a durable, long lasting design with strong industrial stitching and rust proof fittings. Made of extra strong leather, woven material and riveted for additional strength. The belt is embossed with the Bahco logo.Fits waists 32-48in.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 6.3 mmD = 25.4 mmC = 13 mmBearings = 9.5 and 12.7 mm
The Bahco 416 Series Spirit Levels are made from lightweight aluminium with a 1.4mm wall thickness profile. They have unbreakable vials filled with liquid resistant to UV light and extreme temperatures. Two lines in each side of flat vial for easier use. The set contains the following sizes: 1 x 416-600 Spirit Level 1 Vertical & 1 Horizontal Plumb1 x 416-1200 Spirit Level 1 Vertical & 2 Horizontal Plumb1 x 416-1800 Spirit Level 1 Vertical & 2 Horizontal Plumb Specification: Measuring Accuracy: in the normal position 0.029° = 0.5mm/m, overhead measurement 0.043° = 0.75mm/m
The Marshalltown 33 London Pattern Brick Trowel is manufactured from a single piece of high grade tool steel. These trowels have been re-engineered and are produced on the most modern forging equipment available. The blades are expertly ground from heel to toe and are London Pattern with a wooden or DuraSoft® handle and polished steel ferrule. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels. London Pattern with Durasoft handle incorporating a integral finger guard for protection against callouses, heat and cold. Size: 280 x 125mm (11 x 4 7/8in).
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 11 mmD = 3.2 mm 1/8 in
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/50 Brass Padlock has the following specification: ABUS Security Level: 6.Keyed Alike Key Reference: 6505. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 7mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 18mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
The ABUS 145 Series Aluminium Combination Padlocks feature resettable combinations. The lock body is made from solid aluminium with an anodized coating that is corrosion resistant. Fitted with a spring loaded steel shackle for better setting of the opening code. As the padlocks are secured by means of a 3-digit or 4-digit number combination that can be set individually, they are ideal for use in the leisure industry as there is no need to carry a key. They are also ideal for securing items of luggage or tool boxes. 20-30mm: 3 digit combination, to secure valuables/goods of lesser value or at a low risk of theft. 40mm: 4 digit combination, to secure valuables/goods of medium value or at an average risk of theft.Size : 20 mm.Colour : Blue.
The Union 2134E British Standard 5 lever mortice deadlocks are ideal for external timber doors hinged on the left or right with the keys being suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side, and a 20mm deadbolt for secure positive deadlocking and additional resistance against attack. 2134E features an anti-pick, anti-saw and anti-drill security, Chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult, Supplied with covered escutcheon to match forend. The 2134E series locks are recommended by insurance companies, kitemarked to BS3621: 2007(British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 15 Year guarantee. Deadbolt Brass, with hardened steel rollersRebate Kit 2954 (13mm, 19mm or 25mm)Supplied with 3 steel nickel plated keysKey Blank Number KB430 A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass (Striking Plate Finished to match forend) Case Size: 67mm x 71.5mm (2.5 in) Backset: 45mm This is the measurement from the edge of the door to the centre of the keyhole. Pack Type: Visi Pack
The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Supplied in a pack of 2.
Faithfull general purpose bucket with hundreds of uses around the worksite, home and garden. Fitted with a strong wire handle and plastic carry grip. Standard-duty black builders bucket manufactured using recycled materials. Graduated markings in gallons and litres. Internal diameter is approx. 235mm at the bottom and 300mm at the top, the internal height is 260mm.
The Bahco ERGO™ Side Cutting Pliers are made from high-performance steel, with a black anti-corrosion finish and edges which are induction hardened at 62 HRC. They have 2-component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allow the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round shaped jaws give improved accessibility in confined spaces. The pliers are equipped with a return spring featuring an on/off function. The ON-OFF return spring increases ease of cutting with an automatic opening of the jaws. For transport or storage, the spring function can be safely deactivated when not in use.The Bahco 2101G-125 pliers have an overall length of 125mm. Cutting Capacity: Cu: 3.5mm, Fe+: 1.8mm, Piano Wire: 1.6mm.Weight: 105g.
These Faithfull Heavy-Duty Hooked Trimming Knife Blades are made from quality carbon steel and are suitable for trade use. Ideal for anyone that regularly cuts sheet material. The blades feature a reversible sharpened double hook with a point for penetrating and cutting sheet material. These blades are particularly suited for cutting flexible sheet materials such as floor coverings including, carpet, linoleum and vinyl and are widely used in the packaging industry for use on plastic sheeting and in the roofing trade for cutting and trimming felt. Made in Sheffield, UK. Specification: Size: 19 x 60mm.Thickness: 0.63mm.Pack: Plastic Dispenser of 10.
The Kuny's HM213 Leather Heavy-Duty Hammer Holder is made from Top Grain leather. The cradle design eliminates hammer pivoting. Fits belt sizes up to 70mm (2.3/4in) wide.
