The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_13A Socket
_1-Gang 13A Double Pole Switched Socket with Metal Rockers
_Double pole switching for safer operation
_Sleek, low-profile screwless faceplate
VARILIGHT switches are designed to meet the latest European Safety Legislation. Flat plate design allowing the products to sit flush to the wall; with ultra-slim front plates this decorative range gives a stunning finish. Our standard switches are suitable for controlling both mains and low voltage lighting. They are also suitable for 1-way or 2-way circuits (where the same lights are controlled by two switches) and rated at 10 amps. If the lights are controlled by three switches then one of the switches in the circuit must be an intermediate switch with four terminals enabling you to link all three switches together.
_2 Gang - 2 Way 10A Light Switch
_Ultra Flat Plate - Polished Brass Finished Plate
_Decorative Inserts
_Flat Plate
_Stylish Modern Design Quick and Simple Installation
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_2-Way Rocker Switch
_2-Gang 10A 1- or 2-Way Rocker Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Sleek, low-profile screwless faceplate
Varilight Urban is a new collection of dimmers, switches and sockets available in four exciting finishes, inspired by the latest trends in urban interior design: stylish Brushed Bronze, Matt Black, Brushed Brass; plus the already available, and extremely popular, Polished Copper. The V-Pro series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. These dimmers do not work with lighting panels (LED or CFL). Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. -0W-120W (max. 10 LEDs) -Fits in a 25mm Deep Wall Box - V-Pro dimmers are not suitable for wire-wound "toroidal" transformers. -Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series you are able to adjust the minimum brightness setting. -The Best Dimmer for Most Good Quality Dimmable LEDs. -To clean product, we recommend only using a microfiber cloth.
_V-Pro intelligent dimming technology
_Soft start feature and intelligent overload protection
_Adjustable minimum brightness setting and choice of driving modes
_Bevelled edge faceplate
Range: Classic. Finish: Georgian Brass. : 13A Socket + USB. : 2-Gang 13A Single Pole Switched Socket with Metal Rockers + 2x5V DC 2100mA USB Charging Ports. Insert/Rocker Colour: Brass/Black Inserts. Features: Ideal for charging iPad, iPhone, tablets, mobiles and cameras. Features VARILIGHT Smart Port technology making it suitable for all types of devices. The USB port detects the device to be charged and optimises its output accordingly to achieve the fastest possible charging speed. Roped edge faceplate. Dimensions: 95x155x31mm. Faceplate Depth: 7mm. Product Weight (g): 240. Fixing Centres: 120.6mm. Depth from Mounting Face: 16.9mm. Recommended Minimum Back Box Depth: 35mm. Operating Voltage: 220/250V AC. Maximum Load Rating: 13A. Varilight Guarantee (years): 10.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
The Varilight Urban range features a contemporary bevel-edge plate style with an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fused Spur
_13A Switched Fused Spur
_Double pole switching
_Holds standard 25.4x6.4mm fuse
_Replaceable 13A fuse included
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge face-plate. Suitable for controlling both mains and low voltage lighting.
_Many stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Three insert colours options - Black - Polished Chrome - White
_Available in 1, 2 or 3 gang options
_Range: Classic
The Varilight Victorian raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_TV Socket
_1-Gang TV Socket, Co-Axial
_TV socket for use with male co-axial plugs
_Bevelled edge faceplate
Varilight classic 13 amps double pole switched socket and metal rocker switches with bevelled edge faceplate. Switched socket is available in a plate finish and insert colour with gang options.
_Choose stylish plate finish options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Two Insert colours options: - Black - White
_Available in 1 or 2 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge face-plate. Suitable for controlling both mains and low voltage lighting.
_Many stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Three insert colours options - Black - Polished Chrome - White
_Available in 1, 2 or 3 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with roped edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Antique Georgian - Georgian Brass
_Three insert colours options: - Black - Brass - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass - Brushed Steel
_Insert colours options: - Black - Brass - Chrome - Iridium - Steel - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with roped edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Antique Georgian - Georgian Brass
_Three insert colours options: - Black - Brass - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Varilight classic 13 amps double pole switched socket and metal rocker switches with bevelled edge faceplate. Switched socket is available in a plate finish and insert colour with gang options.
_Choose stylish plate finish options: - Mirror Chrome - Iridium Black - Satin - Pewter Effect - Victorian Brass - Brushed Steel
_Two Insert colours options: - Black - White
_Available in 1 or 2 gang options
_Range: Classic
Varilight 10 amps 1 way or 2 way operation rocker switches with bevelled edge faceplate. Suitable for controlling both mains and low voltage lighting.
_Choose stylish finishes options: - Mirror Chrome - Iridium Black - Satin - Victorian Brass - Brushed Steel
_Insert colours options: - Black - Brass - Chrome - Iridium - Steel - White
_Available in 3, 4 or 6 gang options
_Range: Classic
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
The Varilight white plastic dimmer range has a 15mm depth from front to back of plate and require a 25mm wall box . Covered by the Varilight 10 year guaranty. Each dimmer has different characteristics and load requirements which are listed in the product title. Single plate size: 85mm x 85mm. Double plate size: 85mm x 145mm.
_V-Com Dimmer
_1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 0-100W (max 10 LEDs)
_V-Com intelligent TRIAC leading edge dimming technology
_Soft start feature and intelligent overload protection
_Adjustable minimum brightness setting and choice of driving modes to optimise the dimming performance of a given LED lighting load
Varilight Dimension Screw less flat plate power sockets form part of a contemporary range of switches and sockets that is available in a choice of finishes. With many other matching accessories to choose from including the market leading V-Pro range of LED dimmer switches.
_Varilight switched screw less flat plate power socket 13 Amp, 1 or 2 gang
_Finishes: Many to choose from
_Double pole
_Rated at 13 Amp
The Varilight Ultraflat collection offers minimalism with style. The plate is just 1mm thick and wall boxes should be recessed into the wall to achieve a flush finish. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 89mm x 89mm. Double plate size: 89mm x 149mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. Fused Spur: Require a 35mm deep wall box. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A. Flex Outlet: Require a 25mm deep wall box. 16A Flex Outlet Plate. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_2-Way Rocker Switch
_2-Gang 10A 1- or 2-Way Rocker Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Contemporary, ultra-slim faceplate
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
_With soft start and automatic overload protection.
_Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Cooker Switch
_45A Cooker Panel with 13A Double Pole Switched Socket Outlet (Red Rocker)
_Double pole switching
_Double sized plate with 13A socket
_Bevelled edge faceplate
2-Gang 1-Way V-Pro Multi-Point Remote/Tactile Touch Control Master LED Dimmer 2 x 0-100W (1-10 LEDs)
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
_With soft start and automatic overload protection.
_Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Retractive Switch
_10A 2-Way & Off Retractive Switch
_Modules suitable for all PowerGrid frontplates
_Retractive, push to make switch
_For use with blinds, bells and applications where a momentary electric signal is required
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_Blank Plate
_Single Blank Plate
_Used to cover unused wall boxes
_Sleek, low-profile screwless faceplate
Range: Classic. Finish: Georgian Brass. : 13A Socket + USB. : 2-Gang 13A Unswitched Socket + 2x5V DC 2100mA USB Charging Ports. Insert/Rocker Colour: White Inserts. Features: Ideal for charging iPad, iPhone, tablets, mobiles and cameras. Features VARILIGHT Smart Port technology making it suitable for all types of devices. The USB port detects the device to be charged and optimises its output accordingly to achieve the fastest possible charging speed. Roped edge faceplate. Dimensions: 95x155x28mm. Faceplate Depth: 7mm. Product Weight (g): 260. Fixing Centres: 120.6mm. Depth from Mounting Face: 17.8mm. Recommended Minimum Back Box Depth: 35mm. Operating Voltage: 220/250V AC. Maximum Load Rating: 13A. Varilight Guarantee (years): 10.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
The Varilight Georgian range has a roped finish on the edge of the plate. Covered by the Varilight 10 year guaranty. Single plate size: 95mm x 95mm. Double plate size: 95mm x 155mm. 13A Plug sockets: Require a 25mm deep wall box. USB sockets are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Cooker Switch
_45A Cooker Panel with 13A Double Pole Switched Socket Outlet (Red Rocker)
_Double pole switching
_Double sized plate with 13A socket
_Roped edge faceplate
The Varilight Classic raised profile range has an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_light switch
