These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: A.Weight 355g (14oz).Diameter 25mm (1 in).
ABUS 300 Series locking bolt, all steel construction, hardened steel bolt with hidden screws and corrosion protected. Where to use: Ideal for securing sheds, garages and gates.ABUS 300/100 Locking Bolt Specification Shackle Bore: 9.3mm.Length: 100mm.Width: 39mm.
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 2.Weight 1260g (3lb).Diameter 38mm (1 1/2 in).
The Monument 2035Q ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm copper pipe. This puller simply engages with 14tpi thread of the compression fitting to remove the olive from the tube. With a 1/2in square drive for attachment to a ratchet. Made in Britain.
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 500mm (20in)
This Stanley module is designed to fit the Stanley roller cabinet range. It includes a pear head ratchet made from chrome vanadium steel with a bi-material handle. The maxi-drive sockets are 12-point. This set of 23 contains the following: 1 x 1/2in Drive Pear Head Ratchet.18 x 1/2in Drive 12-Point Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 and 32mm.1 x 90° L Handle.2 x Extension Bars: 125mm and 250mm.1 x Universal Joint.
The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.
The Hultafors Hults Bruk Åby Forest Axe is a beautiful hybrid with many types of use. Perfect for shelter building, processing firewood and carving, as well as precision work. The long, thin ergonomic handle minimises the weight but also delivers a great force when striking. Made from American hickory and treated with linseed oil for increased durability. Hand forged from Swedish quality steel, the head is struck 40–60 times to increase density and durability. It has a straighter edge and grinding, slight convex grind and a good finger notch below the head for increased precision. The axe is supplied sharpened, polished and ready to use, in a leather axe sheath. The Åby is named after the nearest village from Hults Bruk, where many of the workers at the forge lived in the mid 20th century. Specification: Head Weight: 700gHandle Length: 610mm (24in)Total Weight: 1015g
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 8mm
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 25 Bag 10
The Hultafors Hults Bruk Hultån Hatchet is our classic outdoor hatchet and your perfect outdoor companion, whether you are hiking in the wild or just need to work on the camp fire. The handle is made from American hickory, treated with linseed oil for increased durability. Hand forged from Swedish quality steel, the head is struck 40–60 times to increase density and durability. With a convex grind cutting edge. The axe is supplied sharpened, polished and ready to use, in a leather axe sheath. It is named after Hultån, the stream which once provided the forge with power. Today Hultån runs through a tunnel underneath Hults Bruk. Specification: Head Weight: 500gHandle Length: 375mm (16in)Total Weight: 805g
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 80mmBore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max. R.P.M. 8,500.
The ITL Insulated Junior Hacksaw with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in). Comes with a 150mm (6in) 25tpi Blade.
The Hultafors Hults Bruk Ekelund Hunting Axe has a ground neck and medium-weight head, ideal for easier forestry work as well as for skinning game with great precision. This makes it your perfect hunting partner. It is also an ideal gift for any hunting enthusiast. The handle is made from American hickory, treated with linseed oil for increased durability. Hand forged from Swedish quality steel, the head is struck 40–60 times to increase density and durability. With a convex grind cutting edge. The axe is supplied sharpened, polished and ready to use, in a leather axe sheath. The name of our classic hunting axe comes from Gunnar Ekelund, the squire who, inspired after a trip to the USA, initiated axe production at a larger scale in 1870–75. Specification: Head Weight: 850gHandle Length: 500mm (20in)Total Weight: 1210g
The Hultafors OK1/OK4 Outdoor Knives have a scandi grind and are made from Japanese knife steel 3.0mm carbon steel that has been hardened to 58–60 HRC. It has a rust protective, electrophoretic deposition coating to withstand corrosion. The ground spine of the blade is designed for starting a fire with a fire starter and there is scale engraved on blade for optimised outdoor usage. It is fitted with a larger handle made from super-durable PP plastic. Supplied in a holster with a hard wearing, textile belt loop for belts up to 80mm wide. The holster can be attached around a button on your work clothes so that it does not come loose whilst still being easy to remove. OK1: Overall Length: 255mm.OK4: Overall Length: 209mm.This Hultafors OK4 Outdoor Knife is supplied loose.
Notched trowel specifically designed for the application of adhesive prior to the setting of wall or floor tiles. High quality stainless steel blade for durability and a long working life. Fitted with a full size soft grip handle for user comfort. Stainless steel notched blade for applying wall tile adhesive. Two straight edges for finishing and cutting off.Blade size 330 x 115mm (13 x 4.1/2 in).Square Nothces: 10mm.
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Kit 14.0mm x 2.0Length 1 1/2 x Diameter
Teng 1/2in drive 12 piece socket set supplied in a plastic container. Clips for additional sockets can be added to the base of the container. The set consists of: 10 x Hex Sockets: 8-24mm.1 x 1/2in Drive Ratchet Handle with 45 Teeth.1 x Extension Bar 125mm.
Convenient three piece set consisting of sharpening stone , bottle of lubricating oil and a honing guide. Guides the user to achieve a precise sharp edge that is square to the blade. Angle setting gauge with pre-set markings of 25°, 30° or 35°.
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Medium T Block Combi Deadblow Hammer 350g (0.7lb)
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 150mm.
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.5.00mm.
These Forgefix Plasterboard nails are Zinc Yellow Passivated for corrosion resistance. They have indented shanks and countersunk heads, and can be used widely in many joinery applications. APPLICATION:The shape of the nail makes them ideal for fixing plasterboard and cladding. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. Countersunk heads are designed to fit flush with substrates to leave a smooth surface finish. The twin thread's main function is to enable an easy start when driving.Plasterboard Nail ZYP 40mm Bag Weight 2.5kg
The Stanley Open Reel Fibreglass Tape has a 13mm wide, durable fibreglass blade with easy to read markings in both metric and imperial graduations. The blade is non-corrosive, printed on both sides for easier reading and resists fading. Its high-visibility yellow ABS case makes it easy to find on the job site and there is a bi-material grip for comfort. The folding rewind crank with rotating fingertip knob makes blade rewind smoother and easier.This Stanley Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 60m/200ftBlade Width: 13mmAccuracy: EC Class III
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 4 x 400mm.Box quantity: 200.
Everbuild Super Plus non-slip tile adhesive is a ready mixed buff adhesive paste for securing ceramic wall tiles and mosaics to most interior wall surfaces. The product is a blend of limestone fillers, clays and acrylic polymers with minor additives. Benefits- Ready mixed formula - no missing, no mess. Apply straight from the tub.- Easier to apply than most competitive adhesives- Acrylic based - Excellent non-slip characteristics - no movement on a 300 x 200 standard large format wall tile- Extended open time- Extremely high bond strength - nearly 3 x the British Standard minimum requirement. Areas for use- Kitchen/Bathroom walls- Shower areas when used in conjunction with Everbuild Powdered Wall Tile GroutSize: 3.75kg Tub
These Forgefix Plasterboard Spring toggles have an all-metal constuction, making them ideal for applications where heat resistance is required. Their wide span wings spread load, ensuring an increased holding capacity. They have excellent holding in lathe and plaster applications.The toggles are quick and easy to use, with no requirement for specialist tools. APPLICATION:Light to medium-duty fixing for all manner of fixtures including bathroom accessories, shelving, lighting, radiators and much, much more.Plasterboard Spring Toggle M5 x 50 Bag 10
The NorTorque® utilises Norbar’s proven mechanism and internal components, and incorporates them into a purposeful and attractive torque wrench that will delight a wide range of users, from professional mechanics to hobby enthusiasts. The wrench offers a comfortable, robust single material handle which also contains an easy to set scale. Fine engineering ensures that the wrench adjustment is both fast and fingertip light meaning that you can do your job more efficiently. The sleek body tube finish was chosen for its robustness and minimal process impact on the environment.This Norbar NorTorque® Adjustable Dual Scale Ratchet Torque Wrench has the following specification: Drive: 1/2inAccuracy: ±3%Range: 60-340Nm (45-220 lb.ft)Ratchet Diameter: 52mmRatchet Teeth: 60Length: 679mmWeight: 1.55kg
The Yale 77 Series Traditional Nightlatches are the Original Yale Lock with classic styling. The deadlocking snib function enables the latch to be held back or deadlocked internally. The nightlatch is key operated from the outside and has a knob handle for operation from inside. The 77 Series Nightlatches have a 60mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Supplied with 1109 external cylinder.This Yale 77ENBPB has a hardened case finished in Electro Nickle Brass and the Cylinder is finished in Polished Brass Pack Type: BoxedSupplied with 2 x keysSecurity Rating: StandardNot recommended for glass panelled doors, unless used in conjunction with a 5 lever mortice lock
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 5.0 x 55mm Box 200
IRWIN QUICK-GRIP® Quick-Change™ Medium-Duty Bar Clamps can be converted from a clamp to spreader in seconds, with a clamping hold load of 136kg. The lockable swivel jaw enables uneven surfaces to be clamped and it is fitted with square XP-style protective pads to protect the work surface from damage. Enhance your clamps with a wide range of QUICK-GRIP® Clamp Accessories.1 x Irwin Quick-Grip® Quick-Change™ Medium-Duty Bar Clamp 450mm (18in)
A heavy-duty oil measuring jug made of high grade white polyethylene with a dust protection screw cap and flexible, removable spout with cap. Fluids are protected against ingress of pollutants and the cap prevents drips and spillages.The Lumatic Polyethylene Oil Measure Jug With Spout has the following specification: Capacity: 2 Litre.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600517R Ratchet Combination Spanner has the following specifications:Size: 17mm. Length: 226mm.
Powerful, no compromise staple guns for 6-14mm staples. Designed for demanding professional applications and precision operations (tested to 100,000 fixings). 40% easier to operate thanks to a patented easy to squeeze trigger with 3-step force adjuster. All steel casing and wear parts inside. Made in Sweden. 5 Year Guarantee.The Rapid R34 fires type 140 flat wire staples.
The Faithfull 8mm Ring on a 50x50mm(2x2in) pre-drilled plate. Ring accessories should never be used for any overhead lifting or load bearing applications.This Faithfull Ring On Plate has a Galvanised finish for increased durability.
