TRIPLE ACTION WOOD TREATMENT takes care of all your wood treatment and preservation needs in the one can. It is a low solvent, low odour solution based on Micro-fine active technology with added fungicides, algaecides and Permethrin to actively kill and protect against all known wood rot, decay, fungi and wood boring insects. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products. TRIPLE ACTION WOOD TREATMENT is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay; fungi and wood boring insects/larvae.
A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.Size 100mm (4in)Cut: warding smoothTanged
Everbuild Timber & Laminate Sealant is a polymer rich, permanently flexible sealant and gap filler designed for sealing around laminate flooring, fitted furniture and kitchen worktops. Formulated using high clarity lightfast colour pigments, the four colour range offers a near or exact match to many popular laminate floors and melamine board finishes. Timber & Laminate Sealant is silicone and solvent free. However, unlike conventional matt finish water-based sealants, it leaves a satin finish which will not pick up dirt and can be easily cleaned with normal household cleaners. If desired, the product can be painted, varnished or woodstained. Also contains a fungicide to prevent mould growth.Everbuild Timber & Laminate Sealant Colour: Oak.Size: 290ml.
Everbuild STICK2® All-Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of household repairs and hobby uses. Will stick ceramics, porcelain, pottery, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics to both themselves and each other. Always open and use this product over a protected work surface. Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour. POROUS SURFACES (fabrics, ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly. NON-POROUS SURFACES (plastics, metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.In both cases, full strength is obtained after 24 hours at 20°CReplace cap immediately after use to keep adhesive usable.
The Hultafors TB600 Bricklayer's Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 19mm (3/4 in)
The Stanley 1-97-515 Wheeled Soft Bag is made from a heavy-duty 600 x 600 denier fabric that resists cuts and scratches. The bag has a rigid bulky structure design and removable dividers which are hard wearing, strong and durable. In addition, the extendable easy carriage handle makes it convenient to manoeuvre the bag. It has multiple internal and external pockets for maximum organisation and secure storage of small parts or personal items. It has easy access to tools and provides maximum organisation including drill storage. Specification Dimensions: 460 x 330 x 450mm.
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 100mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 8,500.
The DEWALT XR Li-Ion Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended run time and a 250-500 lumen output with A broad and even beam pattern. The articulating head has nine positions for directional control of the light output and an extendable hanging hook allows the work light to be suspended during use. Battery and Charger are NOT included. Specification Bulb Type: LED. Light Output: 250-500 lumens. Protection Class: IP54. Height: 345mm. Length: 95mm.
The Airmaster FW400 Frost Watch Convector Heater is a compact heater, which is ideal for heating small rooms. It is floor standing only and offers ideal protection for facilities with a frost damage risk, such as greenhouses, accommodation for animals, and caravans. The heater has an adjustable thermostat that can automatically regulate the temperature between 5-30°C. For safety, it has a cut-out switch. Specification: Voltage: 240VPower Output: 520WIngress Protection: IP20Dimensions: 260 x 245 x 105mm
These Roughneck Traditional Wrecking Bars are made from drop-forged alloy steel, hardened and tempered steel and with polished tips and hexagonal shank.1 x Roughneck Wrecking Bar 450mm (18in)
The BlueSpot Tools Ergonomic Hacksaw is manufactured from zinc alloy for increased durability. With 2 soft grip areas to the front and rear enabling you to grip the tool safely. The blade tensioner is built into the handle for ease of use. Comes complete with a 300mm (12in) blade.
The Purdy® Painter's Pail has multiple grip options, including a flexible bail and coffee-cup style side grip which can help reduce hand fatigue. The roller grid and rest fits mini rollers up to 114mm (4.1/2in). A strong magnet allows users to rest their brush in or out of the paint. Liners are available separately and provide quick and easy cleanup.
Fluxrite® is a mid to dark brown, soft paste, designed for engineering and sheet metal work. The flux is active and contains zinc chloride and is suitable for soldering many metals including copper, brass and mild steel. This all-purpose paste flux has been used successfully in gas systems for many years where professional application is essential. Fluxrite® is WRAS approved for use in both hot and cold water systems and is also listed in the UK Water Fittings and Material Directory. This product has a shelf life of 3 years from the date of manufacture. WRAS Approval No: 2101538.
DEWALT Nitrogen Dealer Boots have a full grain, water-resistant, leather upper. Fitted with a 200-joule steel toecap and a steel midsole for total protection, whilst the PU comfort insole helps to provide all-day comfort. The TPU dual density outsole is resistant to petrol, oil and chemicals for long-lasting durability. It is also anti-static and features anti-scuff toe protection. EN Test: CE EN ISO 20345-2011Safety Rating: S3Slip Rating: SRA1 x Pair of DEWALT Nitrogen Dealer Boots Brown UK 9 EUR 43
The Pest-Stop (Pelsis Group) Sure-Set Plastic Rat Trap has been designed to provide a quick, powerful and humane killing action. A one-click setting and release mechanism, and no-touch disposal, make this hygienic trap ideal for domestic users. A bait well eliminates the chance of bait theft. Specification: Dimensions (HxWxD): 210 x 125 x 80mm
The STANLEY FatMax Ratcheting Screwdriver features Speed Drive Technology that drives screws up to 2x faster*, for speed and efficiency. Simply twist the handle left and right and the fluid ratcheting action continues without interruption, creating a ‘360 degree effect’. Built from robust chrome vanadium and fitted with an ergonomic, textured handle that provides exceptional comfort and grip, ideal for heavier torque applications. The bi-material coating significantly reduces fatigue or strain in prolonged tasks. A locking bit holder and magnetic tip facilitate safe bit retention. A precision tactile zone provides extra rotation control for precision tasks. To reverse the direction of the screwdriver, pull the ratchet mechanism forward and click it into place. It also features an internal bit storage compartment for added convenience. *Versus standard STANLEY FatMax Multi-Bit Ratchet FMHT0-62690.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.This STANLEY CONTROL-LOCK Pocket Tape, with metric graduations only, has double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 10 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. (Metric graduations only.) Specifications: Blade Length: 10m.Blade Width: 25mm.Accuracy: EC Class II.
Kent Stowe SureCut All Purpose Extra Power Loppers allow you to effortlessly prune live, green wood, as well as branches up to 35mm in thickness. Its SK5 Chrome plated steel blades offer exceptional rust resistance and a superior cutting experience. Telescopic handles provide added power and an extended reach, making your pruning tasks a breeze. The innovative Reflex Energy System incorporates rubber bumpers to absorb impact and facilitate a gentle rebound. This guarantees maximum comfort and minimum effort whilst pruning. This high quality cutting tool is built to last, so you can enjoy using it again and again, plus with a 5 year guarantee, you can be assured it won’t let you down. Specification: Cutting Diameter: 35mm.
Kent Stowe Garden Life All Purpose Mini Loppers are the lighter and more compact alternative to our full size SureCut All Purpose Loppers. These mini loppers are designed to be practical and user friendly, providing increased maneuverability, which is especially beneficial for gardeners who may find heavier tools challenging. Equipped with a sharp blade made from SK5 steel, these Garden Life All Purpose Mini Loppers make precision trimming of live, green wood effortless. The innovative reflex rubber bumpers, not only absorb impact but also deliver a gentle rebound, ensuring maximum comfort and minimal effort during your cutting tasks. This high quality cutting tool is built to last, so you can enjoy using it again and again, plus with a 5 year guarantee, you can be assured it won’t let you down. Specification: Cutting Diameter: 24mm.
Kent Stowe SureCut All Purpose Bypass Loppers with SK5 Chrome plated steel blades which offer exceptional rust resistance and a superior cutting experience. Its robust yet lightweight aluminum frame incorporates the Reflex Energy System (patent pending). These reflex rubber bumpers absorb impact and deliver a gentle rebound, ensuring maximum comfort and minimal effort during cutting tasks. Suitable for trimming live, green wood and effortlessly tackling thicker branches. This high quality cutting tool is built to last, so you can enjoy using it again and again, plus with a 5 year guarantee, you can be assured it won’t let you down. Specification: Cutting Diameter: 30mm.
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.Polycell Trade Decorator's Caulk 380ml
The Faithfull Measuring Rule is an essential tool for accurate measurements and is suitable for a wide range of applications. Manufactured from hardened stainless steel, this 15cm rule features a matt finish to reduce fingerprint marks and easy-to-read black and red engraved markings for maximum visibility.
1 x Faithfull Matt Silver Measuring Rule 600mm.
The Kent Stowe Indoor Watering Can comes with a 1 litre capacity. This stunning can is the right size to water your house plants as well as store around the home. Made from durable, powder coated metal for long life, it also features a long stem spout for easy, targeted watering.1 x Kent Stowe Indoor Watering Can 1 litre in Sage Green.
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.Polycell Trade Decorator's Caulk 380ml
The Kent Stowe Indoor Watering Can comes with a 1 litre capacity. This stunning can is the right size to water your house plants as well as store around the home. Made from durable, powder coated metal for long life, it also features a long stem spout for easy, targeted watering.1 x Kent Stowe Indoor Watering Can 1 litre in Blue Sky.
Scan Brass Combination Padlock with a solid brass body and 4-pin brass tumbler mechanism. The 4-digit combination can be simply changed at any time with one of 10,000 different combination codes. To change number, turn the shackle 180 degrees and push into padlock body. Rotate the dials to the desired new number. It also features a hardened and plated steel shackle which is locked in place by rotating the dials. This Scan Brass Padlock has the following specification: Padlock Width: 51mm.Shackle Height: 25mm.Shackle Diameter: 8mm.Shackle Width: 25mm.Security Rating: 6.
Estwing's Pro-Claw Moulding Puller is made of fine tool steel, drop forged and tempered for extra durability. Its precision thin blade is perfect for removing moulding without damaging the wall. The slot in the blade is designed for removing small nails and brads. The other end has a popular Japanese nail puller with precise and sharp claws for removing imbedded nails or headless nails with ease and minimal damage. 1 x Estwing EMP300G Pro-Claw Moulding Puller 300mm (12in).
