ROCOL ULTRAGLIDE X5 is a total protection slideway lubricant which is resistant to water wash off and protects slides from corrosion. Good lubricant and load carrying properties - reduces wear and prevents stick slip. Rapid demulsification - separates rapidly from cutting fluid and is easily removed by oil skimmers/separators. Size: 5 Litre.
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 6mm (1/4 in).
This Energizer® LED Candle Non-Dimmable Bulb has the following specification: Fitting: SES (E14)Input Wattage: 5.9W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 38 x 112mmDimmable: NoRated: A+
Rustins Quick Dry Worktop Oil is a unique water-borne blend of natural plant oils and other special ingredients to nourish and protect all types of indoor timber. The oil dries to a low gloss sheen. It is a quick drying wooden work surface treatment, leaving a durable and water-resistant seal which is not vulnerable to scratching or chipping . Rustins Worktop Oil is low odour, food safe; and conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3. One litre covers approximately 13 square metres per coat. It is touch dry within one hour and can be recoated within three hours depending on temperature and humidity.
Contains: 2 x Small Clear Hooks (hold up to 450g per hook)4 x Small Clear Strips Command™ Clear Hooks provide an innovative solution for hanging decorations, calendars and other lightweight objects. 3M stretch-release technology provides a strong hold and removes cleanly. They’re easy to apply and remove - leaving no holes, marks or sticky residue. Clear hooks and strips blend in, making them suitable for any room in the house or office. Rehanging them is as easy as applying a Command™ Clear Refill Strip, so you can take down, move and reuse them again and again. Suitable for a wide variety of surfaces; solid, hollow and painted walls, as well as other materials including wood, tiles and metal.
This Teng Tools Impact Driver Set contains a 1/2inch drive impact driver, a coupler adaptor, 5/16 inch Hex to 3/8in male hex adaptor and 17 bits.Supplied in a case with a removable, hinged, click lock lid for use as an individual set or as part of Teng Tools tool storage systems. Dimensions: 265 x 142 x 50 mm. Contents: 1 x 1/2 inch drive reversible impact driver.1 x 1/2inch drive coupler adaptor.1 x 5/16 inch Hex to 3/8in Male adaptor.4 x 5/16 inch drive slotted 36mm Hex bits: 6mm, 8mm, 10mm and 12mm.4 x 5/16 inch drive Phillips bits: PH1, PH2, PH3 and PH4.4 x 5/16 inch drive Hex bits: 4mm, 5mm, 6mm and 8mm.5 x 5/16 inch drive Torx bits: TX30, TX40, TX45, TX50 and TX55.
The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles. Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.Finish: Polished BrassCase Size: 76mmBackset: 57mmVisi Pack
WD-40® is an all purpose liquid for displacing moisture, corrosion control, lubrication, cleaning and penetration. It has the ability to penetrate the minute grain boundaries on all metals. Although not essentially a lubricant, WD-40® is regularly used to lubricate all light machinery and electrical equipment. Protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture, and lubricates just about anything. It is also great when it comes to cleaning grease, grime, and other marks from most surfaces. WD-40® is a mixture of chemical concentrates suspended in a high grade petroleum distillate. It will not affect fabrics, rubbers or plastics. Its working temperature is between -100° F and +500° F. Thoroughly recommended to clean, preserve and protect all tools. The Five Basic Functions: CLEANS: gets under dirt, marks and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickers. PROTECTS: metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. LUBRICATES: lubricating ingredients are widely dispersed, and hold firmly to all moving parts. PENETRATES: loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. DISPLACES MOISTURE: Because WD-40® displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits. (Remember to turn the power off before you spray). Did You Know? Discover some unusual uses for WD-40® to keep your world running smoothly! Spray WD-40® onto a clean cloth and wipe to remove scuff marks off skirting boards. Rid shower screens of water marks and smears with a rub down with WD-40®. Give piano keys a clean up with a squirt of WD-40® and a clean cloth. Slugs attacking your favourite plant? Spraying WD-40® on your plant pots will keep them at bay. Stop your ironing board squeaking with a squirt of WD-40® on moving hinges and parts. Tea stains on work tops or lino flooring are no match for WD-40®: apply a squirt of oil to a clean cloth and wipe them away. Squirrels pinching your nuts? A squirt of WD-40® on your bird table stand will help stop them stealing food left out for feathered friends. WD-40® can be used to remove chewing gum from shoes and carpets. If your favourite 12in has a light scratch, a quick wipe with WD-40® will help stop your record skipping. Caught with a stuck-fast zip? A squirt of WD-40® will help get you out of a jam.WD-40® Spray Applicator for use with WD-40 Protection Chemicals.
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M10 x 80 Bag 10
Xcelite Replacement XNB craft knife blades.Xcelite Fine Pointed Knife Blades. Suitable for most detailed cutting and stripping. Suitable for XN100 Knife. Pack of 5.
The Faithfull Tuck Pointer has been designed to help form weatherproof joints between brick courses. The pointer features a high shank with a flexible blade that is essential for working in confined spaces. Fitted with a full size soft grip handle for user comfort. Size: 12mm (1/2 inch).
Masterplug Weatherproof IP54 enclosure supplied with 4 socket 10 metre extension lead. Ideal for temporary outdoor power solutions, such as for outdoor lighting/decorations.
This Energizer® LED Opal GLS Non-Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 5.6W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 109mmDimmable: NoRated: A+
Rustins Yacht varnish is specially formulated on Tung Oil to give maximum protection and durability to marine and other external woodwork. It has excellent adhesion and will not flake or peel when correctly applied. Ideal for exterior doors and window frames. Gloss or satin finish. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Yacht Varnish Satin.Size: 250 ml.
The Squire Warrior High-Security Padlocks are made from armoured steel. Constructed for extreme durability outdoors, these heavy-duty padlocks are designed for securing garages, site equipment, vans, perimeter gates, storage areas and numerous other commercial applications. The padlocks have die cast internal mechanisms which are protected by the hardened armoured steel exterior. This provides excellent resistance to attack, which is further assisted by the use of hardened boron alloy for the shackles. The bodies are covered in a tactile, weather resistant jacket. These combination padlocks are re-codeable and uses a patented mechanism which provides 100,000 variations on the 5-wheel models (65mm) and 10,000 variations on the 4-wheel models ( 45mm and 55mm). CRIMESTOPPERS supported.Specifications: Type: Open shackle.Size: 65mm.
The Knipex 95 61 190 wire rope shears are ideal for medium-hard wire cables up to 7mm diameter without splaying, including those that are extremely strong, such as for example tyre cord. They also have two crimping dies for end caps on Bowden cable sheaths and end ferrules for traction cables and the blades are hardened to approximately 64HRC for added strength and durability Cutting head on the 95 61 190 are forged with polished head and handles plastic coated for added grip and a comfortable grip. Specification Length: 190mm (7.1/2in).Cutting Capacities: Multi-Stranded Cable: 7.0mm, Wire Rope: 5.0mm, Medium Hard Wire: 4.0mm & Piano Wire: 2.5mm.This Knipex ;Wire Rope/Bowden Cable Cutter is fitted with PVC handles.
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.
Quick Set Mouse Traps are easy-to-set and allow you to dispose of the mouse without touching it. Supplied as a twin pack Press trap to open and apply bait. Suggested baits include peanut butter or chocolate spread. Place trap on a flat surface along a wall, where mice run. To discard the mouse, simply squeeze trap and release. There is no need to touch the mouse. Always wear gloves to dispose of the mouse and it should be double bagged using bin liners, or similar, and placed in a bin with a secure lid. Always read the label and product information before use. Use biocides safely.
Sets of interlocking brass stencils.The interlocking facility ensures uniformity and neatness when marking out dates etc.Useful for making signs or marking cartons and packing cases.1 x Set of Brass Interlocking Stencils - Letters 2in
The Everbuild STICK2® All-Purpose Superglue Tube is a high strength universal glue that can fill gaps up to 0.1mm. It can also bond non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. The superglue is quick drying and forms an instant bond in just 1 minute. Size: 3g.
Blackfriar Super Yacht Varnish is perfect for protecting exterior wood and joinery against extreme climatic conditions. Its superb durability makes it perfect for buildings which take the worst of the weather and is of course ideal for yachts and boats. Application Method: Brush and Roller. Coverage: 14m²/L/Coat.Touch Dry: 4-6 hours.Hard Dry: 3 days.Re-coatable: 12 hours.Blackfriar Super Yacht Varnish. Size: 500ml.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Finish.Blade Diameter: 300mm.Bore: 30mm.Teeth: 60.Rake: POS.
This Faithfull Paint Mixing Paddle has a 8mm hexagon shank for use in power drills of at least 400 watt and above. It is perfectly balanced and is quiet in operation. Mixes between 1-5 litres of paint. The overall length of 400mm with a 60mm diameter paddle allow access to most modern paint containers. Length: 400mm. Diameter: 60mm.
DEWALT Construction Circular Saw Blade for use with portable machines to cut softwoods and composite materials. The impact resistant carbide teeth help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade is for the cutting of rough timber, possibly with embedded nails. Specification: Blade Diameter: 235mmBlade Bore: 30mmTooth Count: 24Plate Thickness: 1.7mmKerf Thickness: 2.6mmGrind Type: ATBRake Angle: +20°
The Faithfull Mitre Box is made from high quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.Ideal for use when cutting picture frame joints and general carpentry work.Box Length: 230mm (9in)Box Width: 115mm (4.1/2in) Capacity
The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.Pack of 3 DEWALT Sanding Belts 560 x 100mm 80g
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 25mm (1in)
These Faithfull mitre blocks are made from high quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability. With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws. Ideal for use when cutting picture frame joints and general carpentry work.Block Length: 230mm (9in) Block width: 64mm (2.1/2in)
Stanley Mini Foam Gloss Sleeves are ideal for use with gloss, primer, varnish and all oil and solvent based paint. They are made from high density foam to ensure a smooth finish on all flat surfaces. Specifications:Size: 100mm (4in).Diameter: 6mm wire.Pack quantity: 10.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 19mm (3/4in)
PlastiKote metallic spray paint is ideal for small decorative and craft projects and is perfect for adding a special touch around the festive season. The paint creates a deep, rich metallic finish and is suitable for indoor and outdoor use. Suitable for: papier mache, stone, terracotta, wicker and wood. Drying time: Touch dry in 5-10 minutes, thoroughly dry in 25-35 minutes. Coverage: approximately 2.23m² per 400ml.This PlastiKote Metallic Spray Paint has the following specifications: Colour: Rust.Pack Size: 400ml.
Manufactured from high quality C45 carbon steel, this Faithfull tap and die set is suitable for cleaning and cutting threads in mild steel, aluminium and brass. Each set contains a tap wrench, die holder, screwdriver and a range of metric taps and dies, featuring the most commonly used European threads. The Faithfull FAITAPDSET21 21 piece metric tap & die set contains the following: 1 x Tap wrench: M3-121 x Die stock holder: 25mm (1 inch)1 x Screwdriver8 x Metric Taps: 3 x 0.5mm, 4 x 0.7mm, 5 x 0.8mm, 6 x 1.0mm, 7 x 1.0mm, 8 x 1.25mm, 10 x 1.5mm and 12 x 1.75mm.1 x Tap: 1/8 inch NPT8 x Metric Dies (same sizes as metric taps)1 x Die: 1/8 inch NPT.
Everbuild top quality cotton twill dust sheet with polythene inter-laminate, which stops paints and liquids passing through. The strong, hardwearing cotton resists wear from tools, stepladders and feet. Suitable for covering all types of furniture and floors Size: 3.6 x 2.7m (12 x 9ft).
Ronseal Multi Purpose Wood Filler can be applied straight from the tube and gives professional, long-lasting, tough and durable repairs. The flexible formula resists shrinking and cracking, and it can be stained, varnished or painted. Suitable for both interior and exterior use. Once dry, simply sand then stain, varnish or paint over. Ideal for use on doors, window frames, screw/nail holes, cracks, gaps, skirting boards, floors and other wooden surfaces. Available in various shades and sizes. Specification: Application: Filling KnifeDrying Time: 2 hours approx.Protection Level: High1 x Ronseal Multi Purpose Wood Filler Tube Medium 325g
These Forgefix Masonry Anchors are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. APPLICATIONIdeal for fixing racking, machinery, trunking, pipework, switch gear and other applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Masonry Anchor Bolt Loose Zinc Yellow Passivated M6 x 10 Bag 10
