The Unifix A4-316 Stainless Steel Hexagon Setscrews are designed for reliable fastening in various applications. Made from high-quality stainless steel, these screws offer excellent corrosion resistance and durability.
High-Quality A4-316 Stainless Steel for Corrosion Resistance
Hexagon Head Design for Easy Installation
DIN 933 Standard for Consistent Quality
Size M8 x 100 for Versatile Use
Ideal for Both DIY and Professional Applications
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.The DEWALT DEWDT6522QZ multi material drill bit has the following dimensions:Size: 8mm x 134mm.
This Ronseal Ultimate Protection Decking Stain has the following specification: Colour: SageSize: 2.5 litre Ronseal Ultimate Protection Decking Stain will keep your deck protected from the weather and everyday wear and tear. It looks great all year round, with added slip resistance. It lasts twice as long as a standard decking stain. Available in a range of colours.
Ronseal High Performance Wood Filler is a chemically bonded filler and catalyst that provides extremely tough repairs to virtually any wood damage without shrinking or cracking. Fills to any depth and can be drilled, screwed or planed. Ideal for use in interior or exterior wood repairs more than 5mm deep. Typical areas include window frames, sills, doors and door frames. For minor and surface wood repairs use Ronseal Multi Purpose Wood Filler. Available in: Natural, Dark or White. Application: Filling Knife.Drying Time: approx 30 mins.Protection Level: Very High.The Ronseal RSLHPWFD275G is supplied in a tub with re-sealable lid. Colour - Dark.Size: 275g.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 7.5mm.Working Length: 66mm.Overall Length: 109mm.Pack Quantity: 10.
Bosch GPL 5 G Professional Point Laser with green laser points providing up to four times better visibility than red points. It features a easy-to-use interface with a two-position switch: when turned on, it automatically self-levels, when turned off, the pendulum is locked. This 5-point laser is transport-ready in no time, thanks to an integrated rotation mount which features strong magnets for fast and secure tool mounting. With its rubberised housing and recessed glass, as well as IP65 dust and water jets protection, the GPL 5 G Professional also resists tough jobsite conditions. Ideal for room partitioning with 90- degree angles and for transferring points from floor to ceiling. It is very suitable for jobs like plumbing and building frames for drywalls. Supplied with: 2 x AA 1.5V LR6 Batteries.1 x Pouch. Specifications: Accuracy: ± 0.35mm/m.Self-levelling Range: ±4 degree.Working Range: 30m.Laser Diode: < 1 mW, 500 - 540 nm.Laser Class:2.Levelling Time:4 Seconds.Power Supply: 2 x AA 1.5V LR6 Batteries (supplied).Operating Temperature: -10-45 degreeC.Storage Temperature:-20-70 degreeC.Dust and Splash Protection: IP65.Tripod Thread: 1/4in.Weight: 0.35kg.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3105 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 5.
The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability.1 x DEWALT SDS Max Drill Bit 16 x 540mm
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 11.0mm. Working Length: 91mm.Overall Length: 142mm.Pack Quantity: 10.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 3.0 x 16mm.Box quantity: 200.
The Unifix Grade 8.8 High Tensile Hexagon Bolts DIN 931 Galvanised - M20 x 130 are designed for high-strength applications, ensuring durability and reliability in various projects.
High Tensile Strength: Ideal for heavy-duty applications.
Galvanized Finish: Provides excellent corrosion resistance.
Standardized Dimensions: M20 x 130 for compatibility with various fittings.
Easy Installation: Designed for straightforward assembly.
Versatile Use: Suitable for construction, automotive, and machinery applications.
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 80 Bag 25
The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips. Ideal for aligning bolt holes during steel construction.1 x Roughneck Chrome Plated Aligning Bar 610mm (24in)
These Forgefix Spring Head Nails are a popular roofing nail for corrugated roofing. Their twisted shank assists in absorbing movement that may occur in the roofing construction. They are galvanised for increased resistance to corrosion. APPLICATION:Galvanised spring head nails are most commonly used for securing corrugated sheeting and other roofing materials.Can be used with a rubber or plastic spat washer. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.
These ForgeFix Multi-Purpose Copper Clout Nails are suitable for use with softwood. They have a slightly larger head that distributes the load directly underneath the top of the nail. Thick sheeting will stay firm and secure. They have a copper finish that ensures the highest possible durability. Used in many roofing applications.These ForgeFix Multi-Purpose Clout Nails have the following specification: Size: 50mmThickness: 3.35mmFinish: CopperBag Weight: 1kg
The Unifix A4-316 Dome Nuts DIN 1587 are designed for secure fastening in various applications. Made from high-quality stainless steel, these nuts provide excellent corrosion resistance and durability.
High-Quality A4-316 Stainless Steel for Durability
DIN 1587 Standard for Reliable Performance
M6 x 1.00 Size for Versatile Use
Ideal for Marine and Outdoor Applications
Easy to Install with Standard Tools
Box of 500 for Bulk Use
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 45mmThread: Fully threadedPack Quantity: Box of 200
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 130mm.Pack quantity: 5.
These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads have a zinc finish for increased durability.The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications.APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types.Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Supplied in a handy ForgePack.
ForgePack of 20 ForgeFix Multi-Purpose Pozi Screws CSK ST ZP 4.0 x 70mm
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 80 Bag 10
These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Felt Nail Galvanised 20mm Bag Weight 2.5kg
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 70mmEffective Thread Length: 33mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 4 x 25mm.Box quantity: 200.
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.The DEWALT DEWDT6524QZ multi material drill bit has the following dimensions:Size: 10mm x 134mm.
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 1 x 4 Box 200
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 1.1/4 x 8 Box 200
The Unifix Class 8 Full Nuts DIN 934 Plain - M8 x 1.25 are designed for reliable fastening in various applications. These nuts provide excellent strength and durability, making them ideal for both DIY and professional use.
High-Quality Material: Manufactured from robust materials for long-lasting performance.
Secure Fit: Designed to provide a tight and secure connection.
Versatile Use: Suitable for a wide range of fastening applications.
Easy Installation: Simple to use with standard tools for quick assembly.
Class 8 Strength: Ensures high tensile strength for demanding tasks.
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt Zinc Plated M5 x 12 Bag 25
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 20mm.Box quantity: 200.
The Roughneck Wire Stripping Pliers are made from high-quality steel, that has been drop-forged, hardened and tempered. In addition, the cutting edge is induction hardened for added durability. They have finely polished heads with a clear lacquer coating that helps prevent rust. Fully encased spring-loaded. The pliers are fitted with comfortable double injected, air-cushion grips that help to reduce fatigue during use. The handles also feature a handy lanyard hole. Manufactured to DIN ISO 5746 Standard.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 1.75mm.Working length: 22mm.Overall length: 46mm.
Main Product Description:
Introducing the FloPlast Boss Adaptor - Solvent Weld 32mm Grey. This innovative product is designed to provide a secure connection between your waste pipes and boss fittings. It is solvent welded into the circular opening of the boss fitting, ensuring a permanent and reliable fit. The waste pipe can then be glued inside the boss pipe for added durability. Available in grey, it seamlessly blends with various home décor styles while offering unmatched performance.
Features:
- Solvent welded design for a strong and long-lasting connection
- Circular opening fits perfectly into boss fittings
- Waste pipe can be glued inside for extra stability
- Available in grey color
Benefits:
- Ensures a watertight seal, preventing leaks
- Provides a customizable look with its versatile color option
- Offers ease of installation due to its simple design
Main Product Description:
FloPlast Push Fit Waste 135' Obtuse Bend is a high-quality waste management solution suitable for both residential and commercial environments. Crafted from robust materials such as polypropylene, these bends offer durability and ease of installation due to their push-fit connection system. With a 135-degree obtuse angle, they provide efficient waste flow while maintaining a sleek design. They come in grey color and fit most standard waste pipes, excluding solvent weld waste. The bends require no solvent welding or tightening, ensuring a seamless installation experience.
Features:
- Robust construction using polypropylene
- Push-fit ring seal system for easy installation
- Suitable for most standard waste pipes (excluding solvent weld waste)
- 135-degree obtuse angle for efficient waste flow
- CE Standard compliance (tested to EN 1451)
- Available in white, black, and grey colors
- Various diameters available: 32mm, 40mm, and 50mm
Benefits:
- Quick and easy installation without the need for solvent welding or tightening
- Enhanced flexibility with a 135-degree obtuse angle
- Durable and long-lasting construction using polypropylene
- Compatible with a wide range of waste pipes
- Improved hygiene and safety with a push-fit ring seal system
The Moldex MX-7 Helmet Mounted Earmuffs fit helmets with 30mm Euro slots. They have a flexible, lightweight design with smooth sliding size adjustment. Fitted with viscoelastic foam cushions for improved pressure distribution and increased comfort. ;The larger cup openings are designed to fit most ear sizes. Has a signal to noise ratio (SNR) of 31 dB.
The Moldex MOL7625 Disposable Foam Earplugs Mellows Station contains 250 pairs of mellow earplugs. The station is made from recyclable material and with only 2% wastage, the dispenser puts protection at the centre of the workforce. The plugs remain hygienic as the dispenser mechanism is automatically replaced with every refill. The mellows are made from soft material that is easy to insert and offers protection against lower noise levels. The Disposable Foam Earplugs Mellows Station is designed to keep you in touch with your environment and aid communication. Please note that the 7060 mounting bracket is sold separately. Has a signal to noise ratio (SNR) of 22 dB.
