DEWALT Hamden Holster Pocket Shorts are constructed from Pro-Stretch fabric (73% Rayon / 22% Nylon / 5% Spandex) for ultimate comfort and flexibility. They have twin holster pockets, a lined mobile phone pocket and twin rear pockets.1 x Pair of DEWALT Hamden Holster Pocket Shorts Waist 32in
WOOD PRESERVER is a low solvent, low odour solution based on Micro-fine active technology. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products. In addition the use of ultra light fast pigments on the coloured variants give an even fade resistant finish which will last for years. WOOD PRESERVER is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay and fungi. Benefits:Solvent Free formula.Non Flammable.Internal and external use.Can be applied to damp timbers.Colour: Red CedarSize: 5 litres.
Everbuild Sikamix Plus is a general purpose, economic liquid plasticiser and improver for brick and blockwork mortars. It reduces water demand and increases strength. It also improves the frost resistance of hardened mortar while also reducing efflorescence.
The Einhell GC-CH 18/40 Li Solo Hedge Trimmer combines power and flexibility. This small, handy hedge trimmer is a lightweight and comfortable to use. Its robust metal gearbox has been designed for a long service life and ensures the perfect transfer of the battery-power to the laser-cut and diamond-ground steel blades. A 2-hand safety switch protects the user during operation. Supplied with a aluminium blade cover for safe storage and transport. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Strokes at No Load: 2,400/min.Blade Length: 47.5cm, 13mm gap.Cutting Length: 40cm.Weight: 2.0kg.
The Footprint No.35 Bolsters and Chisels merchandiser stand is an essential part of any hand tool retailer. The stand contains the following products: 3 x Brick Bolsters 75mm (3in)2 x Brick Bolsters with Guards 75mm (3in) 3 x Brick Bolsters 100mm (4in)2 x Brick Bolsters with Guards 100mm (4in) 3 x Plugging Chisels2 x Plugging Chisels with Guards 3 x Flooring Chisels2 x Flooring Chisels with Guards 4 x Long Flooring Chisels 3 x Scutch Chisels 25mm (1in)3 x Scutch Chisels 38mm (1.1/2in) 3 x Cold Chisels 250 x 25mm (10 x 1in)2 x Cold Chisels with Guards 250 x 25mm (10 x 1in)
DEWALT DCF840 XR Impact Driver with a high-power, brushless motor capable of outputting up to 192Nm of torque, ensuring heavy applications are completed quickly. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The LED ring light delivers the best visibility in the toughest environments. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,200/min.Impact Rate: 0-4,200/bpm.Max. Torque: 192Nm.Weight: 0.88kg (without battery).
Everbuild Black Jack® 906 Bitumen Roofing Emulsion is a stable bitumen/water emulsion of medium brushing consistency. It is dark brown in colour and dries to a black, flexible coating, which is odour and taint free. It is specifically designed for overcoating leaking roofs.
The Faithfull Aluminium Grain Shovel is primarily designed for use in the agricultural and food industries for moving loose materials such as grain, feed or fertilizer. The Western pattern square mouth scoop has reinforcing moulded ribs to give it extra strength for heavy-duty applications. The upturned sides help to contain the grain as it is being transported around. Made from lightweight rustproof aluminium which has the advantages of not damaging the grain and can be easily cleaned and sterilised. Fitted with an FSC® European ash wood shaft and plastic D-handle. The grain shovel can also be used for many other purposes which include clearing snow and moving other lightweight materials around, such as wood chips and garden compost. Specification:Overall Length: 1200mm (48in).Blade Size: 360 x 430mm.
The DEWALT DCG460X2XR FlexVolt Angle Grinder is supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries.1 x DCB118 Battery Charger.1 x Grinding Guard.1 x Cutting Guard.1 x Hex Wrench.1 x Side Handle.1 x Kit Box.
The DEWALT TSTAK™ 2.0 Tower has been designed for convenient and easy access to tools. Made up of the following cases: 1 x TSTAK™ 2.0 Deep Toolbox has a removable, half-size, internal tote tray for easy access to key hand tools, fixings and power tool accessories. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK™ 2.0 Shallow Toolbox with front and top carry handles that allow the box to be carried in both orientations. The lid is fitted with a high-performance seal that provides water and dust protection (IP54) to power and hand tools in the box. Other features include a customisable foam insert that keeps power tools safe during transportation, heavy-duty metal front latches and a padlock eye for increased security. 1 x TSTAK™ Toolbox III (Deep Drawer) made from 3mm polypropylene plastic. It has a heavy-duty ball bearing sliding drawer and is supplied with 8 removable storage cups with lids for excellent organisation. Its bi-material handle ensures user comfort. 1 x TSTAK™ V Clear Lid Organiser with 2 large and 5 small removable storage cups. Ideal for storing small parts and accessories. Its unique heavy-duty lid design locks all compartments in place for secure storage. 1 x TSTAK™ Carrier Base. It can be fitted quickly and easily onto the base of any TSTAK™ unit to allow easier transportation of tools and accessories. With 360° swivel wheels and a locking brake for maximum manoeuvrability. Compact and lightweight design for easy storage when not in use. All can be stacked and clipped to other TSTAK™ toolboxes via durable, metal pin side latches. This allows numerous boxes to be stacked and held securely together for easier transport. DEWALT Tracker compatible, an internal fixing point allows the DEWALT Tracker (not supplied) to be installed and the boxes tracked via the DEWALT Tool Connect App. Total Load Capacity: 100kg
The DEFENDER Hasp & Staple has been designed specifically for use with any DEFENDER padlock. Made of steel with an anti-corrosion black finish. It offers a cost-effective security solution for sheds, gates and outdoor applications. Length: 120mm.
DEWALT Fast Cut General Purpose Reciprocating Blades have a bi-metal construction, a combination of HCS and HSS for greater flexibility. Adjusted tooth setting for maximum durability and M2 HSS cutting edges for sharpness. The universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo and Skil. Suitable for wood, ferrous and non-ferrous metals, sheet steel, pipes and profiles. Specification: Length: 203mmPitch: 2.5mmTPI: 10Pack Quantity: 5
This DEWALT FLEX Stainless Steel Curved Trowel has the following specification: Blade Size: 12 x 4inBlade Thickness: 0.5mm The DEWALT FLEX Stainless Steel Curved Trowel is lightweight but also offers the sturdy construction that professionals demand. Made from triple-hardened, premium stainless steel with precision-ground, pre-broke edges and corners; ready for immediate use. The blade also has a 1/8in concave curve. It has a high-strength but lightweight aluminium handle mount and super-strong, surface-mounted rivets that last longer than through-rivet designs or taped designs. The handle has been over-moulded with proprietary brushed leather injected composite, meaning the handle will custom form to the user's hand under regular use for maximum comfort. It will provide years of reliable, all-day use on the job site.
The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).
The Evolution FURY 5-S Plus Multi-Purpose Table Saw is ideal for any home workshop. The FURY 5-S provides tremendous cutting versatility including, cross cut, mitre cut, bevel cut, straight cut for large or small applications. It will easily cut steel, aluminium, wood (even wood with nails) and plastic, using just one blade. Features a rip fence that is solid and sturdy in every position for essential cutting security, furthermore, the included anti-bounce device minimises material movement. Supplied with: 1 x Multipurpose Blade 255 x 25.4mm Bore x 24T1 x Fine Wood Blade 255 x 25.4mm Bore x 60T2 x Table Extensions4 x Extension Table Support Struts2 x Blade Changing Tools1 x Mitre Gauge1 x Anti-Bounce Device1 x Adjustable Rip Fence2 x Rear Cantilever Braces1 x Push Stick2 x Fence Rails1 x Table Saw Stand (requires assembly)1 x Hex Key1 x Spanner1 x Fence Locating Bar1 x Instruction Manual Specification: Input Power: 1,500WNo Load Speed; 3,250/min.Capacity: Wood 32mm, Mild Steel Plate/Box Section 3mmMax. Cutting Depth: 90° 85mm, 45° 65mmTable Dimensions: 583 x 901mmRiving Knife Thickness: 1.8mmBlade: 255 x 25.4mm Bore x 24TWeight: 20.14kg
The Batavia MAXXPACK Reciprocating Saw is compatible with all makes of standard reciprocating saw blades. It has a soft grip top moulding and back handle to provide extra comfort and control during use. There is a variable speed trigger and 'lock-on' button for extended use, and a quick and easy tool-free chuck to easily change blades. Comes as a Bare Unit, No Battery or Charger. Specification Strokes at No Load: 0-3,000/min.Stroke Length: 25.4mm
The Bahco Contractor's Bi-Metal Holesaw Set contains Sandflex® bi-metal holesaws that are specifically designed for metal cutting but can also be used in most materials such as wood and plastics. Bi-metal construction with 8% cobalt. Supplied in a handy plastic case. This 11 Piece Set contains: 4 x 20mm Holesaws4 x 25mm Holesaws1 x Arbor*2 x Replacement Drill Bits Specification: Max. Cutting Depth: 38mm *Arbour requires a power drill with 10mm chuck.
The Evolution Hulk Compaction Plate is a professional quality compaction plate which offers superb value and is a very realistic alternative to hiring for many users. It is powered by a 2.4hp, 4 Stroke OHV Single Cylinder petrol engine and has a compact deisgn so it is very portable, but rest assured although small in size, performance is not compromised. Ideal for the building and landscaping industries and for the following applications: Crusher Run, Sand, Soil, Small Aggregates, Patio & Block Paving Preparation, Driveways & Tarmac Repair. Specification Engine: Petrol 4 Stroke OHV Single Cylinder 2.4hpNo Load Speed: 3,600/min.Oil Type: SAE 10W-30 (API SJ or SL)Oil Capacity: 0.25 litresFuel Type: Unleaded (Octane 86 or higher)Fuel Capacity: 1.2 litresValve Clearance: IN: 0.15mm 0.02mm (cold) EX: 0.20mm 0.02mm (cold)Spark Plug: NGK BPR6ESSpark Plug Gap: 0.028 - 0.031inCompaction Force: 10kNPlate Working Area: 400 x 320mmUsage Time: 20mins.Weight: 38kg Vibration: 46m/s²Sound Power Level (LWA): 101dB(A)
The Evolution F165CCSL Multi-Material Circular Saw is perfect for use around the home or workshop thanks to its powerful 1200W motor and optimised gearbox that, when combined with the Evolution F165TCT-14CS blade (supplied), can cut a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel, the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable depth of cut from 0-53mm and 0-45° bevel capabilities for versatile cutting in any material. Advanced safety features, such as channelled airflow and vacuum extraction port, help keep the cutting line visible, whilst the electric blade brake and blade guard, which closes in 0.4 seconds, reduce the time the user is exposed to a spinning saw blade. Supplied with: 1 x Multi-Material Blade, 1 x Hex Key, 1 x Parallel Edge Guide, 1 x Dust Hose Connector and 1 x Instruction Manual. Specification: Input Power: 1,200WNo Load Speed: 3,700/min.Blade: 165 x 20mm Bore x 14TMax. Blade Bevel Angle: 45°Max. Cutting Thickness: @90° 53mm, @45° 34mmPower Cable Length: 3mWeight: 4.3kg
The DEWALT DCMASPS5N XR FlexVolt Pole Saw Attachment comes with an extension pole. It has a long reach hook for the easy removal of pruned branches, and auto-oils for ease of use. Part of the DCMAS57 XR FlexVolt Split Boom System; fits both DEWDAS5713X1 and DEWDCAS5713N. Specification: Bar/Chain Length: 20cmCutting Diameter: 15cm
Faithfull Cable Feeding Rods make easy work of electrical cable routing in areas with restricted access. They fit through small holes and are ideal for running cables under floorboards and in wall cavities. The rods can be joined together with their brass screw connectors to a total length of 10m. Made from fibreglass composite, providing a balance of rigidity and flexibility that will not splinter or snag. The connectors are crimped and glued for extra strength. This set is supplied in a compact plastic tube for easy storage in a toolbox or tool bag. Contains: 10 x Fibreglass Cable Rods with brass adaptors Ø4mm x 1m1 x Mini Ring1 x Adaptor1 x Flexible Lead 185mm1 x Hook1 x Traction Fish Tape 240mm
Arctic Hayes Landlord/Homeowner Gas Safety Record Pad of 25 A4 forms in triplicate. Suitable for landlord inspections, servicing and appliance checks for homes and caravans. Issued in accordance with the Gas Safety Regulations for installation and use.
The DeWALT DCG418SHD XR FlexVolt Detect Angle Grinder has a 54V brushless motor for enhanced power, efficiency and durability. Dual-handed switching ensures the side handle is fitted and used for safe operation. The recessed spindle lock maximises depth of cut and gives greater protection to button when using in confined spacesAn electronic brake stops the wheel quickly when the trigger is released. Whilst the electronic clutch reduces the kickback reaction in the event of a pinch or stall. A mesh debris cover restricts dust being sucked through the motor. The rubber overmould provides enhanced grip and comfort.Specifications:No Load Speed: 9,000/min.Disc Diameter: 125mm
The DeWALT DCG418SHDX XR FlexVolt Detect Angle Grinder is supplied with:2 x 54V 9.0Ah Li-ion Batteries1 x Charger1 x TSTAK Case
The DeWALT DCMWSP660 FlexVolt Self-Propelled Mower with 6 variable speeds, is propelled by rear wheel drive. Its 53cm steel deck and autosensing brushless motor have been engineered for cutting performance and durability. Autosense, eco mode and power boost settings allow you to customise performance, maximise runtimes and tackle tough mowing conditions.The dual blade design provides extended runtime and improved cutting performance. With collect, mulch and rear side discharge options for a variety of cutting preferences. It also features a single point height adjustment system with 6 cutting settings, from 25-102mm. The one touch handle systems quickly telescopes and folds handles for ease of storage.The convenient LED dashboard communicates battery state of charge, displays real-time motor feedback, enables the ability to switch between settings (autosense, eco mode and power boost) as well as providing other warnings to the user.3 year guarantee. Tool covered by extended warranty, subject to registration.Bare Unit, No Battery or Charger Supplied.Comes with: 1 x Collection Bag 67 litre, 1 x Mulch Plug, 1 x Rear Side Discharge Chute Attachment.Specifications:Cutting Width: 53cmCutting Height Adjustment: 6 Stages, 25-102mmGrass Box Capacity: 63 litre
The Evolution R185CCSX Circular Track Saw is perfect for trade or DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-16CS blade (supplied) it can cut a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. Advanced safety features such as channelled air flow and vacuum extraction port help keep the cutting line visible, whilst the electric blade brake and blade guard, that closes in 0.4 seconds, reduce the time the user is exposed to a spinning saw blade. Supplied with: 1 x Multi-Material Blade 185 x 20mm Bore x 16T, 3 x 340mm Cutting Tracks, 1 x Connector Bar, 4 x Screws, 1 x Hex Key, 1 x Parallel Edge Guide, 1 x Dust Hose Connector, 1 x Instruction Manual. Specification Input Power: 1,600WNo Load Speed 240V/110V: 3,900/3,700/min.Cutting Capacities: Mild Steel Plate/Box Section: 3mmMax. Cutting Thickness:0° 64mm/59mm with track45° 47mm/42mm with trackMax. Blade Bevel Angle: 45°Blade: 185 x 20mm x 16TPower Cable Length: 3mWeight: 5.1kg Evoultion R185CCSX Circular Track Saw Kit 185mm 240V Version.
The Evolution R185CCSX Circular Track Saw is ideal for both trade and DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-20CS blade (supplied) it can cut through a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable cutting depth and 0-45 _ bevel capabilities for versatile cutting in any material. It also features channelled air flow and a vacuum extraction port, that helps to keep the cutting line visible. The electric blade brake and blade guard (that closes in 0.4 seconds) improves user safety and reduces exposure to a spinning saw blade. Supplied with 1020mm of track which is perfect for making straight cuts in long or sheet materials with ease. The saw is also compatible with the Evolution ST1400 and ST2800 tracks (sold separately). These saws have been developed to be compatible with most leading brands of circular saw tracks. Specification: Input Power: 1,600WNo Load Speed: 240V: 3,900/min., 110V: 3,700/min.Capacity: Mild Steel Plate/Box Section 3mmMax. Cutting Thickness With/Without Track: 0°: 64/59mm, 45°: 47/42mmBlade: 185 x 20mm Bore, 16TBevel Capacity: 0-45°Cable Length: 3mWeight: 5.1kg Evolution R185CCSX Circular Track Saw 185mm 110V Version
