Rapid No. 53 precision cut fine wire staples are made from high-performance galvanised steel for strength and durability. The fine wire makes the fixed staple almost invisible, ideal for fabrics, decoration, small construction and light repair.Pack of 2000 Rapid 53/6B 6mm Galvanised Staples. For use with: Rapid R53, R153, R253, R353, R453, MS2.1, MS4.1, ALU610, ALU753, ALU853, ALU953, E100, ESN530, BTX530, PS101, PS6-16, M10R, M20, M30, M40, Eco Tacker, Hobby Tacker, Hobby Tacker Dual, Multitacker, Compacta, Hobby Electric.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.This Cuprinol Garden Shades has the following specification: Colour: Urban Slate Size: 1 Litre
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.This Cuprinol Garden Shades has the following specification: Colour: Urban Slate Size: 5 Litre
Polycell Trade Quick Dry Polyfilla is an instant filler that is suitable for plaster, wood and masonry.It is ideal for small interior jobs and filling hairline cracks. It will not shrink or crack and sands easily.
Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish: Phosphated.
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 21mm.
Q.Max Thrust Races are recommended to increase punch life and to significantly ease the operation of the punch. Makes cutting the holes effortless.This 12mm Thrust Race is suitable for 32.5-51mm punches.
Bahco ProfCut Toolbox Hardpoint Saw for medium thick materials such as timber, plywood, fibre and chipboard. Slim blade and nose for easy access. 3-side ground, super sharp GT-toothing for high cutting speed. Has a two-component handle that provides optimum user comfort. Blade Length: 380mm (15in).Teeth: 11 tpi.
This Teng Tools set is an ideal solution for removing broken screws, pipes, bolts and studs. The 11-piece set contains 5 screw extractors, 4 bolt extractors and 2 nut splitters, which are supplied in a handy storage tray. The TTSN11 Stud and Nut Remover Set contains the following: 5 x Screw extractors: 7/64, 9/64, 5/32, 1/4 and 19/64 inch. 4 x Stud 1/2inch drive extractors: 6, 8, 10 and 12mm. 2 x Nut splitters: 5-20mm capacity and 14-27mm capacity.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. These regular 6-point metric impact sockets have a 3/4 in square drive, and have a locking pin and retaining ring facility.The TEN940528 Impact Socket has the following specifications:Size: 28mm. Length: 52mm.
The Bahco BAHCOFIT TORX Tip screwdrivers are suitable for TORX head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip: TX10.Blade length: 75mm.Total length: 170mm.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 25mmWorking Length: 155mmOverall Length: 230mm
These Bahco Bypass loppers are ideal for pruning and training grape vines and fruit trees. They have a strongly curved blade, with a slicing cut action for quick and powerful cuts. The loppers have very robust, forged counter blades which are strong and durable.Soft rubber buffers ensure user comfort and prevent fatigue. Length: 500mm. Cutting capacity: 30mm. Weight: 935g.
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 1 5/8 in.Key Type.B. 5/16 in hexagonal wrench
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-30-400 Long Flat Bit 30mm
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.48.0mm.Key Type. MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.37.0mm.Key Type.MC. 10mm hexagonal wrench
Masterlock’s range of electrical Lock out hasps are practical, flexible and hard wearing and used when multiple numbers of workers are operating in the area. They can be used in a variety of locations for a broad range of lockout tasks. This Steel Red Lockout Hasp enables lock-out by multiple workers to keep the equipment inoperative while repairs or adjustments are made. It has a steel body with vinyl coated handle, and can hold up to 6 padlocks. Max shackle diameter: 6.35mm. Jaw diameter: 25mm. Dimensions: 44mm x 114mm
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-20-400 Long Flat Bit 20mm
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 109mm (4.29 in). Blade length (B): 9mm (0.35 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 1.0mm (0.04 in). Cutting capacity: 0.2-1.25mm. Head type: TaperedCutting edge: Micro-bevel. The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
Bahco Handled Three-Square Second Cut File 1-170 with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. It has an equilateral triangle, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot. Size: 200mm (8in).Cut: Second Cut.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626-6 Combination Auger Bit has the following specification: Size: 18mmWorking Length: 155mmOverall Length: 230mm
Bahco 90 Series Black ERGO™ Adjustable Wrenches have a comfortable, thermoplastic handle and larger grip width and tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall Length: 300mm (12 in).Jaw Capacity: 34mm.Weight: 690g.Spare Adjustable Jaw: BAH8073A - Available to orderSpare Knurl Set: BAH8073B - Available to order
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 76 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The Bahco 6224 Slip Joint Water Pump Pliers are fitted with 2-component handles for maximum grip comfort. Made from high-performance, alloy steel with a phosphate finish, anti-corrosion treated. The narrow head provides great accessibility in confined spaces. With hardened teeth (60 HRC to 62 HRC) for a long product life and strong gripping on any shape. Up to 35% bigger mouth opening compared to market standard. The design helps to prevent fingers being pinched. Conforms to ISO 8976. Specification: Capacity: 61mmOverall Length: 250mm
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/40HB63 Brass Padlock has the following specification: ABUS Security Level: 5.Keyed Alike Key Reference: 404. Shackle Width: 22mm.Shackle Height: 63mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 103mm.Overall Depth: 15mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P25L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
These new Bahco secateurs are ergonomically designed to fit perfectly in the hand, with comfort and a good positive grip, as the shape and size of the handles are adapted to the size of the hand. The cutting head on the Bahco PXL2 adapts to the task to be performed, and gives a good clean cut, on twigs, branches or delicate flowers that need pruning. Bahco have used the most up to date materials in constructing these secateurs for comfort, cutting performance and to help reduce fatigue and pain, as the PX handles are made of composite material with soft rubber on the upper part. These are available in three sizes, and a rotating version for all types of garden maintenance from harsh pruning of large or overgrown shrubbery, to delicate stemmed flowers, for propagating to flower arrangements: S (small), M (medium) and L (large) with three sizes of cutting heads with different cutting capacities available: class 1 (15mm, 1/2-inch), class 2 (20mm, 3/4-inch) and class 3 (30mm, 1 1/4-inch) and a main feature is all cutting heads fit all handles.Version: Class 2 PX-M2 Medium. Max Cutting Diameter 20mm.
These new Bahco secateurs are ergonomically designed to fit perfectly in the hand, with comfort and a good positive grip, as the shape and size of the handles are adapted to the size of the hand. The cutting head on the Bahco PXL2 adapts to the task to be performed, and gives a good clean cut, on twigs, branches or delicate flowers that need pruning. Bahco have used the most up to date materials in constructing these secateurs for comfort, cutting performance and to help reduce fatigue and pain, as the PX handles are made of composite material with soft rubber on the upper part. These are available in three sizes, and a rotating version for all types of garden maintenance from harsh pruning of large or overgrown shrubbery, to delicate stemmed flowers, for propagating to flower arrangements: S (small), M (medium) and L (large) with three sizes of cutting heads with different cutting capacities available: class 1 (15mm, 1/2-inch), class 2 (20mm, 3/4-inch) and class 3 (30mm, 1 1/4-inch) and a main feature is all cutting heads fit all handles.Version: Class 2 PX-L2 Large. Max Cutting Diameter 20mm.
Bahco BAHCOFIT screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. This set of 7 contains:5 x Slotted screwdrivers: 3.5 x 100mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm and 8.0 x 150mm.2 x Phillips screwdrivers: PH1 x 100mm and PH2 x 125mm.
