Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 8.0mm x 1.25 set of 3
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Wild Thyme.Size: 750ml.
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 3.5mm x 0.6 second
Yale Doormaster™ Universal lock uses the latest patented technology from Yale to ensure security and simplicity of installation. It is designed to replace 100% of PVCu door locks with a 35mm or 45mm backset and a 16mm faceplate. The revolutionary new range means that if a multi-point lock is broken, the lock - rather than the whole door - can be replaced. The one-piece mushroom rollers ensure smooth operation and help prevent separation. These easily adjustable rollers create a weather-tight seal to protect the interior of homes against the elements and help to keep warmth in. The centre hook protects against attack, and helps in preventing separation. Doormaster™ is supplied with a fully assembled one-piece keep, which includes the patented Uni-packer™ system for fast, easy and reliable installation. Fixing tabs make fitting easy and more secure. Doormaster™ locks are suitable for most PVCu, Composite or Timber doors. They are available for doors with a single hook or bolt in the centre of the door, and also for locks with additional hooks or bolts at the top and bottom of the door. 10 year guarantee.The YALYDMUNI35 Doormaster Universal Replacement PVCu Lock is suitable for the following dimensions:Backset: 35mm.Faceplate: 16mm.
Cuprinol 5 Year Ducksback has an advanced, wax enriched, formulation that colours and weather protects rough sawn garden wood for up to 5 years. The formulation is also showerproof in 1 hour. Its non-drip formulation minimises mess during application. It is quick drying, low odour and safe to use to use around plants and pets. Ducksback is ideal for restoring and enhancing the appearance of sheds and fences and will help to keep them looking good for years to come. Coverage: A 5 litre pack covers to to 24 square metres with one coat.CUPDBAG5L Ducksback 5 Year Waterproof for Sheds & Fences has the following specifications:Colour: Autumn GoldSize: 5 litres.
Faithfull Professional quality hexagon keys made from fully hardened chrome vanadium steel. All keys from 4mm (5/32in) have chamfered edges to prevent damage to blade and fittings. All keys 3mm (1/8in) and above are marked with their size.Size.1/16in AF.
The BlueSpot Tools Long Arm TORX Key Set has been manufactured from chrome vanadium steel for increased durability. The keys have a black oxide coating to aid corrosion resistance. The extra length enables a greater amount of torque to be applied to the fastener. The tips are chamfered to enable access from a wider angle. Sizes: TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, TX50
The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life.1 x Marshalltown EzyScreed™ Level 1.2m (4ft)
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-50-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 50m/165ft Blade Width: 13mmAccuracy: EC Class II
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Cuprinol Garden Shades has the following specifications: Colour: Old English Green.Size: 2.5 Litre.
The Stabila LAX 300 G Cross Line Laser Level is the ideal partner for interior construction professionals who need accurate laser lines with optimum visibility. The innovative STABILA GREENBEAM technology provides razor-sharp, extremely bright laser lines. You can perform plumb-line and levelling work on the floor, wall and ceiling, all at the same time. The laser produces 1 horizontal line, 1 vertical line and plumb-line dots, upwards and downwards. The vertical line almost covers the entire room. It has a quick self-levelling function and pendulum technology that has been designed specifically for the construction site. With easy to change functions, via the single-button operation. Fitted with energy-saving laser diodes that provide an operating time of up to 15 hours. Can be used directly on the floor, attached to a tripod (1/4in thread) or fastened to metallic objects/wall bracket by its rare earth magnet. The compact housing features an extendable foot for height adjustment and working directly on U-profiles. With shock absorbent STABILA soft grip casing that is IP54 rated, against splash and dust damage. The laser can be pivoted 360° inside the housing. Supplied with: 1 x Target Plate, 1 x Wall Bracket, 1 x Belt Pouch & 3 x AA 1.5 Volt Batteries Specification: Level Accuracy: ± 0.3mm/m.Self-Levelling Range: ± 4.5°.Working Range: 30m.Power: 3 x AA Batteries (Supplied).Average Battery Life: 15 Hours.Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash & dust damage.
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.3.30mm.
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.4.50mm.
This Aluminium Stand-off provides extra working space by positioning the ladder away from wall, flat packed with full instruction for use. Quick and easy to hook onto your ladder. With a V - shaped cut-out for positioning around small obstacles such as drain pipes. Stand-off: 300mm (12in).
The Metabo KGS 305M Cross Cut Mitre Saw has a compact, light weight design with a one-handed transport design feature. Offers enormous cutting performance due to the extremely powerful universal motor and large saw blade. With a sliding function for wide work pieces. Easy saw blade change by means of a spindle lock: No dismantling of the pendulum protective cover required. Easily transported thanks to the ergonomically-designed handles and saw head lock. It has a robust die-cast aluminium design for the highest demands and offers effective dust extraction via an integrated dust scoop. Starting current limitation prevents the actuation of the lock on start-up. The saw offers fast and precise setting of common angles using stop points with a laser for exact display of the cutting line (mains powered, no batteries required). Infinitely extendable table width extension, removable to put long panels, slabs etc. Underneath. The bright LED work light provides illumination of the cutting line (mains powered, no batteries required). For safe sawing it has high sliding rear fence profiles and a material clamp for secure fixing of the work piece from the top or front. The saw head can be inclined to the left, with additional angle range for undercuts. All scales and operating elements are visible from the working position and can be operated intuitively. Specification Input Power: 1600WNo Load Speed: 3700/min.Blade: 305 x 30mm BoreTurntable Setting Left/Right: 47/47°.Max. Cutting (mm): Width 90°/45°: 305/205, Depth 90°/45°: 105/67, 90°/90°: 305x105Double Mitre: 45°/45°: 205x67mmBlade Tilt Left/Right: 47/2°Weight: 19.6kgMetabo KGS 305M Cross Cut Mitre Saw 1600W 110V Version.
The DEWALT HSS G Jobber Drill Bit is a precision ground twist drill bit for rapid drilling, long life and excellent concentricity. It has been manufactured from High Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right hand cutting, type N flute with a precision ground end at 118° point angle.This DEWALT HSS-G Jobber Drill Bit has the following specification: Diameter: 3.5mm.Length: 70mm.Working Length: 39mm.Pack Quantity: 2.
The DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in packs of 2, 5 or 15.DEWALT Impact Torsion Bits PZ3 25mm Pack of 5
The 1/4 inch drive sockets have a Hex socket (6 point) end and are made from chrome vanadium steel with a high chrome finish. The OGV Profile allows for tightening torque to be applied to the sides rather than to the angles of the nut. These sockets are for manual use only. ISO 2725-1, DIN 3124, ISO1174-1, ISO691, ISO1771-1.Size: 5.5mm Length: 25mmWeight: 10g
The U-Care High Reach Flow Thru Brush with flow regulator, which extends to over 5ft. A big 10 inch head of scratch resistant bristles makes this brush ideal for cars, 4X4s, vans and also conservatories.
The Roughneck Micro Fork is an industrial grade fork, only smaller, which can be used in confined spaces or by people who find using a full size fork difficult. It has a lightweight fibreglass handle with an ergonomic polypropylene YD grip. Overall length: 740mm (29in).
The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, ensuring that the job can be completed accurately and quickly. It is ideal for use on-site and in joinery shops to increase productivity with excellent results. The jig has fully adjustable apertures for fire door requirements and renovation work. It is ideal for fitting a new door into an old frame, and is suitable for timber based doors and square butt hinges. The jig is supplied with a carry case, bradawls and a special 16mm guide bush. Specifications: Preset hinge sizes: 20mm, 25mm and 30mm. Hinge sizes possible:Minimum length: 67mm (2.5/8in).Maximum length: 127mm (5in).Minimum width: 12.7mm (1/2in).Maximum width: 35mm (1.3/8in). Door sizes possible:Minimum height: 1,956mm (6ft5in).Maximum height: 2,100mm (6ft10in).Minimum thickness: 16mm (5/8in).Maximum thickness: 51mm (2in). Weight: 2.9kg.Overall length: 1,956mm.
SB-373N series parallel pin punches made from vanadium extra steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish.Length: 150mm (6 in).Size: 2mm (5/64 in)
Rustins Quick Dry Advanced Wood protector is a low odour, non flammable product based on micro emulsion nanotechnology. The ultra fine particle size allows deep penetration of the protector to take place, so that the performance of the product is much greater than standard wood protector products. This Protector can be applied to wet or dry timbers, interior and exterior. It is suitable for use within domestic, commercial, institutional and industrial premises.Rustins Advanced Wood Preserver. Colour: Green.Size: 5 Litre.
Record IRWIN Mechanics vices are the most popular and widely used general purpose vice for light to medium-duty applications. The vice has high quality grey iron castings that resist distortion under severe pressure, with a smooth action provided by dovetailed, long barrelled, unbreakable nut and hardened steel replaceable jaw plates.Record Irwin No.1 Mechanics Vice. Jaw Width: 75mm (3in).
The DEWALT Multi-Tool Semi Circle Blade has 22TPI for cutting wood with nails and other materials. The blade is quick and easy to change and is suitable for all common oscillating tools. Suitable for the following materials:Wood with nails.Wood.Drywall.PVC. Specifications: Blade width: 100mm.22TPI.
These Forgefix Pozidriv Machine Screws are designed for use with nuts or pre-tapped holes. They are Zinc plated for increased corrosion resistance. Their Pan Head with a flat under head surface makes the screws ideal to lay flat on sheet material of all types, thus reducing deformation. APPLICATION:Ideal for use in many DIY, ironmongery, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. A Machine screw is generally a smaller fastener, threaded the entire length of its shank that usually has a recessed drive type (Slotted, Phillips, etc.).Machine Screw Pozi Pan Head ZP M4 x 30 Bag 25
The Ronseal One Coat Damp Seal permanently blocks damp stains on walls and ceilings. You can even put it onto damp walls. It lets trapped moisture escape without causing anymore damage. When it's dry you can paint or wallpaper over it. BEFORE YOU START Make sure the cause of damp has been fixed. Open your doors and windows for ventilation and put down dustsheets to protect anything you don't want to get paint on. Preparation: Remove any wallpaper with a scraper and sand off any loose or flaking paint. Make sure the area you are painting is clean, if you've got mould, get rid of it with our 3-in-1 Mould Killer. You can paint onto damp surfaces, just make sure they're not dripping wet. USING YOUR DAMP SEAL Give the paint a really good stir, then use a roller or brush to put it on. If you're covering a small damp patch, make sure you are painting at least 30cm around the area. It'll be touch dry in 2 hours. After 4 hours it'll be ready to paint or wallpaper over. If the area is prone to mould, you can paint over it with our 6 Year Anti-Mould Paint. Usage Areas: All indoor walls and ceilingsCompatibility: Bare or previously painted walls and ceilingsClean Up: Clean all brushes or rollers in warm, soapy waterCoverage: 5m² per litreThis Ronseal One Coat Damp Seal comes in the following: Colour: WhiteSize: 750ml
Knipex 97 33 Crimping Pliers with round magazine and 5 interchangeable profiles, which allow the professional electrician to quickly switch between crimping applications and to carry only one set of pliers. Factory calibrated for accurate and reliable crimping of connectors: Non-Insulated Open Plug: 0.5-6.0mm².Insulated Terminals, Plug and Butt Connectors: 0.5-6.0mm².End Sleeves (ferrules): 0.25-25mm². Non-insulated crimp terminals, tube and compression cable lugs in accordance with DIN 46234 and DIN 46235 and non-insulated crimp, butt and press connectors in accordance with DIN 46341 and DIN 46267. Sizes: 0.5 - 10.0mm².
Mitre shears with variable angle cuts for use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Length: 240mm. Weight: 422g. Special features: Ergonomic design with special softgrip handles. Opening latch. Eliminates the need for a mitre box.
This hollow punch is made from carbon steel. It has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather.
The Faithfull Prestige Philadelphia Pattern Brick Trowel is ideal for levelling, spreading and shaping mortar or cement. The blade is solid forged from one-piece of chrome vanadium steel, which is taper ground for strength and flexibility. The polished and hardened edges ensure resistance to abrasion for a long working life. This trowel is well balanced with a high lift soft grip handle for a superior grip and sufficient knuckle clearance. The handle is complete with a heavy-duty end cap, designed to withstand continuous use when tapping bricks. The Prestige range is manufactured to the highest standards and is also covered by a 10 year guarantee.1 x Faithfull Prestige Philadelphia Pattern Brick Trowel 250mm (10in)
