The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMBC052 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.375 mm and Low profile (L/P) 1.1 mm guide bar slot. This chain is made to suit saws with a 35cm (14in) bar and chain with 52 drive links including: Makita:DCS34, UC3520AStihl: 009, 017, 018, 019, 023L, E14, E140Solo: 636Poulan: ES300McCulloch: 1436Dolmar: ES36Bosch: AKE35, AKE35S, AKE35-17S, AKE35-18S, AKE35-19S, AKE35SDS, SDS35 1800W Compares to F016800257, F016800015, 164730001
The Forgefast Hexagonal/Torx® Compatible Timber Screws are suitable for fixing into soft or hardwood. They have a combination hexagonal head with a deep Torx® compatible insert that reduces cam-out, also provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. Hardened case and core give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction. Available in a green or tan treated finish.Forgefast Hexagonal/Torx® Compatible Timber Screws Size: 7 x 200mm.Pack Size: Tub of 50.Finish: Green elementech 2000.
The DEWALT PH2 Drywall Screwdriver Bits have a modified Phillips No.2 head. They are made from heat treated steel for hardness and durability. The bits are 152mm in length and have a unique fitment that has been designed for use with the DEWALT Drywall tool DCF6201. They are perfect for screw driving applications into Drywall.DEWALT DT7206 PH2 Drywall Screwdriver Bit 152mm Pack of 5.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen. Protects for up to 8 years.This Hammerite ;Direct to Rust Metal Paint ;has the following specification: Finish: Hammered.Colour: Black.Size: 750ml.
Everbuild Builder's PVC Tape is a strong PVC Tape with versatile adhesive qualities that is ideal for jointing all PVC and polythene sheets and membranes. Flame retardant, perfect for contamination barrier fastening, dust sealing of sheets and many other uses in construction and industry. Available in 2 sizes.Everbuild Builders PVC Tape Colour: Black.Size: 75mm x 33m.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: White.Size: 500ml.
Rapid FP216 Fence Pliers are part of the 'Smart Gardener' range of wire fencing pliers designed for fitting fencing to narrow spaces on large surfaces, for example, animal cages. The ergonomic soft grip handle and long magazine will allow you to fix secure fencing around the house and garden quickly and easily. The handle locks for safety and storage. Uses VR16 hog rings 2-8mm. 2 year guarantee.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11.00mm.Working length: 94mm.Overall length: 142mm.
The DEWALT Contractor Pro Safety Glasses feature ToughCoat™ hard coated lenses, that provides tough protection against scratches. The distortion free lens reduces eye fatigue and are made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provides a secure, comfortable fit whilst the soft, rubber nosepiece offers maximum all-day comfort. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Contractor Pro ToughCoat™ Safety Glasses have Clear lenses.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 14 mm HSS.Working length: 83mm.Overall length: 156mm.
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 22mm (7/8 in)
Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit. Specifications: Resin: Urethane Acrylate.Colour: Green.Fixture Speed No Activator: 5 mins.Fixture Speed With Activator: <5 mins.Viscosity: 2500 cps.Gap fill: 0.2mm.Flash Point: >85°C.Shelf Life: 12 months min.Specific Gravity: 1.08.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 24 hours.Static shear strength: 30 N/mm².Bondloc high strength retaining Compound. Size: 10ml.
Roughneck Non Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors. These rubber mallets will not discolour or leave marks on work surfaces. Used as a general purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.The Roughneck ROU61216 450g (16oz) rubber mallet has a mediumhard rubber head, soft grip handle and a strong steel shaft, this is allmoulded together to make a one piece tool.
The Faithfull Multi-Purpose Compound Power Cut Snips ;feature polished, solid forged blades with serrated edges to help prevent sheet material slipping when being cut. The extra long blades make them ideal for cutting sheet steel and other non-ferros materials and are also perfect for cutting bulky products such as vinyl, plastic and rubber. The non-slip soft-grip handles, compound action and return spring mechanism ensure an effortless cutting action. A quick release safety catch also allows the snips to be locked in the closed position during storage. Specification Length: 250mm (10in).Blade length: 75mm (3in).Cutting Capacity: Cold Rolled Steel: 20 Gauge 0.94mm, Stainless Steel: 24 Gauge/0.533mm.
The Bessey EZ360 One-Handed 360 Clamp is extremely versatile. Its innovative 360 turning mechanism allows you to adjust the handle position to the clamping task at hand. A 12-step latching mechanism securely holds the selected handle position. The large clamping surface helps to distribute the clamping force of up to 1,400N. They also feature removable protective caps which help to protect the work piece surface. It can be repositioned for spreading, without additional tools, thanks to a simple release mechanism via push-button on the top part.1 x Bessey EZ360 One-Handed 360 Clamp 150mm.
ALM Manufacturing Replacement Trimmer Lines to fit most models of garden trimmers. Available in various lengths and thicknesses. Manufactured in the UK.This ALM Manufacturing SL315 Light-Duty Petrol Trimmer Line is suitable for use with all makes of light-duty petrol trimmers (16-25cc). Specification: Diameter x Length: 2.0mm x 15mColour: Green
Faithfull ratcheting tap wrench precisely constructed with an ergonomically designed sliding 'T' handle for fitting into tight spaces with ease. The ratchet can be set for right or left hand operations or fixed in the neutral position.The Faithfull FAITWRM4M6 has the following specifications:Tap size capacity: M4 - M6
Sets of non-interlocking zinc stencils in a range of sizes. Useful for making signs and marking cartons and packing cases.Letter set contains - 27 pieces consisting A to Z Letter Size: 6in
Silver Gorilla Tape is extra thick, extra strong and extra durable, which makes it ideal for repairing heating, ventilation or air-conditioning ducts. Suitable for indoor and outdoor use, with superior UV resistance and ability to grip to rough, uneven, unforgiving surfaces such as wood, stone, plaster, brick and more.1 x Gorilla Glue Gorilla Tape Silver 48mm x 11m
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M6 x 16 Bag 25
The Batavia MAXXBRUSH Multi-Material Brush Head is ideal for rough cleaning. It can be used on paving slabs, tiles and various types of wooden surfaces. After jet washing your decking and allowing it to thoroughly dry out, use the multi-material brush to clean out the grooves where dust and dirt will have settled prior to applying your stain, oil or decking treatment. This will allow better penetration/adhesion to the wood and prolong the life of your decking. For use with the Batavia MAXXBRUSH.
Irwin Sabre Saw Blades 966R Demolition offer superior construction and design, making them faster cutting and longer lasting. For use on heavy-duty and demolition applications in wood and metal. Suitable for use with materials 5mm (3/16in) and thicker. Length: 225mm.Teeth: 6 tpi. Supplied in a pack of 5.
Faithfull Aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook & loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID3.Pack of 25 Faithfull Hook & Loop Sanding Disc DID3 Holed 125mm x 40g
A flat twist knot high tensile steel wire circular brush compatible with 115 mm (4 1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Conforms to ISO 9001 and DIN EN1083-1 and 2. Specification: Type: CircularDiameter: 115 x 12mm faceThread: M14 x 2Wire: 0.35mm Twist Knot SteelMax. RPM: 12,500
The ABUS 82TI Series TITALIUM™ Shutter Padlocks have a a solid lock body made from TITALIUM™ aluminium alloy. It has a 12mm special locking bolt with NANO PROTECT™ plating for extreme corrosion resistance. The precision pin cylinder has a large number of key differences for extra security. A paracentric keyway ensures optimum picking resistance. The padlock has automatic locking, just push the bolt, no key required. It is ideal for locking applications with limited accessibility, e.g. shutters and rolling gates, basement doors and windows, storage and transport boxes.This ABUS 82TI/70 TITALIUM™ Shutter Padlock has the following specification: ABUS Security Level: 6.Keyed Alike Key Reference: KA8518. Shackle Width: 22mm.Shackle Height: 13mm.Shackle Diameter: 12mm. Overall Width: 70mm.Overall Height: 50mm.Overall Depth: 20mm.
Faithfull 150mm Hook & Loop Sanding Discs made from aluminium oxide abrasive on a flexible E-weight paper backing. With the added convenience of the Hook & Loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID2.Pack of 25 Faithfull Hook & Loop Sanding Disc DID2 Holed 150mm x 120g
This Faithfull Carpenter's Pencil Set contains 12 medium pencils suitable for general carpentry, a retractable pencil holder and pencil sharpener. Almost any material can be marked out with these carpenter's pencils, with the exception of some metals and polished or glazed surfaces. The pencil leaves a clear visible line irrespective of material or grain. The retractable pencil holder keeps your pencil safe and close at hand. Let go of the pencil and the automatically retracting 850mm cord will pull the pencil back to its safe and ready-to-use home position. The belt clip can easily be attached to a belt, shirt collar or pocket. Also included is a specially shaped pencil sharpener for use with rectangular section carpenter's pencils, as well as ordinary hexagonal and round pencils.
Faithfull Aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook & loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID3.Pack of 25 Faithfull Hook & Loop Sanding Disc DID3 Holed 125mm x 80g
This trowel has a projecting groove along its base which is upturned at one end for dividing fresh concrete slabs into equal parts to control cracking.Wood handle.Double hang.Carbon steel blade.Blade Size 150 x 75mm (6 x 3 in) , with a 12mm (1/2 in) radius edge.
The ALM Manufacturing GH001 W Glazing Clips are used when replacing greenhouse glass during routine maintenance. They are suitable for most aluminium greenhouses. Pack of 50.
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Cutting Disc 230 x 3.2 x 22.23mm
Used by electricians for cutting out patrices, this chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 250 x 57mm (10 x 2 1/4 in).
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.The Gorilla Bar Twin Pack contains the following: 1 x Gorilla Bar Junior 350mm (14in).1 x Gorilla Bar 600mm (24in).
These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Form B ZP M10 Bag 100
The Bahco Heavy Metal Reciprocating Saw Blade is designed for demanding metal cutting of thick materials. Made from virtually unbreakable Sandflex® bi-metal with precision ground teeth for all materials and type of cut. This series of extra thick blades have a wider body, making them more rigid with a higher resistance to fracturing and bending, allowing straighter cuts. Slope shaped nose for various types of cuts.1 x Pack of 5 Bahco Heavy Metal Reciprocating Saw Blades 150mm 18 TPI
