These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 3.5 x 20mm.Box quantity: 200.
Main Product Description:
Introducing the FloPlast 114mm Square Running Outlet in Black, a high-quality, cost-effective solution for both new-build and refurbishment projects. This PVC-U outlet is designed to join two gutter lengths and provide an outlet to a 65mm Square downpipe, increasing the maximum flow rate and serviceable roof area of the system. It features a pre-lubricated seal for improved performance and is available in multiple colour options.
Features:
- Attractive rectilinear profile
- Clip system for fast and easy installation
- Connects two lengths of Square Line gutter
- Outlet connects to a 65mm Square downpipe
- Ideal for outlet placement at centre of gutter run
- Available in multiple colour options
- FloPlast 10-year colour and performance guarantee
- Covered by BSI Kitemark – no. KM501316
- Manufactured to BS EN 607 standards
Benefits:
- Cost-effective solution for new-build and refurbishment applications
- Increases maximum flow rate and serviceable roof area of the system
- Pre-lubricated seal for improved performance
- Available in multiple colour options
- 10-year colour and performance guarantee
- Kitemarked and manufactured to BS EN 607 standards
- Suitable for various roof areas and gutter systems
Main Product Description:
The FloPlast Compression Waste Coupling 40mm White is a high-quality, easy-to-install waste system made of white polypropylene. It is suitable for carrying waste safely and cleanly away from homes and can accept both plastic and copper pipes. The coupling is designed to BS EN 274-1 standards and is available in 32mm and 40mm diameters.
Features and Benefits:
- Easy to install without the need for solvent welding
- Manufactured to BS 5254, BS EN 1451-1:2000, BS 5255, BS 659, and BS 2871 standards
- Accepts plastic and copper pipes
- Quick and easy to install with a compression outlet
- Ideal for carrying waste safely and cleanly away from homes
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 27mmLength: 38mm
FloPlast's uPVC White Round Downpipe Clip is used to keep 68mm round downpipes fixed firmly in position once installed.
Product information
10 years Guarantee
Kitemark approved
Pre-lubricated seals
Features and benefits
The original Half Round profile
A practical, easy to install system, with good flow capacity
Pre-lubricated fitted gutter seal and retaining clip system for fast user friendly installation
Cost effective solution for both new build and refurbishment applications
Connects to most other metal or plastic systems using our extensive range of adaptors
Specifications
Brand FloPlast
Pack quantity 1
Product diameter 68mm
Product length 113mm
Standard BS EN 607
Colour White
Material uPVC
Model name/number RC1W
Pipe shape Round
Product code 5055149903878
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381506 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 6mm.
Main Product Description:
FloPlast AV40 is a 40mm air admittance valve designed for compression installation. It comes in a white finish to blend seamlessly with your plumbing system. This valve allows for the release of air while preventing water from flowing back into the drain pipe, ensuring efficient wastewater disposal.
Features:
- Compression fitting design for easy installation
- White finish for aesthetic appeal
- Designed for use with universal waste pipes
Benefits:
- Ensures proper ventilation in wastewater systems
- Prevents siphoning and gurgling noises
- Promotes smooth flow of wastewater
This Teng Tools 9 piece punch set contains a selection of punches and cold chisels. These striking tools are made of steel, which is hardened to ensure a long working life. The pin punches can be used to drive pins for affixing a fixture to a rotating shaft, whereas the centre punch is ideal for marking the centre of a point as a guide for drilling. Supplied in storage tray. Contents: 1 x 150mm Centre Punch: 5mm.6 x 150mm parallel Punch: 3, 4, 5, 6, 7 & 8mm.1 x 150mm Flat Chisel: 19mm.1 x 200mm Flat Chisel: 25mm. Specification Dimensions: 265 x 142 x 50mm.Weight: 1.4kg.
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 9/16 AFLength 38mm
Floplast TS43 40m White Polypropylene S Waste Trap with 38mm Seal.
Manufactured in white high temperature polypropylene with compression type outlets that fit plastic and copper waste pipes 32mm/11/4".
Manufactured to BS EN 274-1:2002
Main Product Description:
Introducing the FloPlast 68mm Round Pipe Shoe in Grey, designed to perfectly complement your 68mm round downpipes. This durable shoe offers a consistent finish and color, ensuring minimal maintenance while providing strength to support typical ladder weight. Available in various colors including grey, black, white, brown, and anthracite grey, it seamlessly integrates into your existing guttering system.
Features:
- Suitable for 68mm round downpipes
- Inherently strong and durable
- Available in multiple colors
- Consistent finish and color, virtually maintenance-free
- Tough enough to support normal ladder weight
Benefits:
- Enhances the aesthetic appeal of your property by matching the color scheme of your downpipes
- Reduces maintenance requirements due to its consistent finish and color
- Provides additional strength to support ladders during cleaning or repairs
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120532 Bi-Hexagon, 12-point socket has the following specifications:Size: 32mm. Length: 43mm.
The Mega Drive range of screwdrivers feature a unique ergonomically designed, bi-material handle which gives excellent grip. With exhaustive quality control tests, these Teng Tools screwdrivers ensure that the head fits securely into the screwdriver head, allowing torque to be applied more easily. The screwdriver blades are made from strong Chrome Vanadium Steel with black tips, and are manufactured to DN5264. Supplied in storage tray. Contents: 2 x TX Screwdrivers: TX8 x 75mm & TX9 x 75mm.5 x TPX Screwdrivers: TPX10 x 100mm, TPX15 x 100mm, TPX20 x 100mm, TPX25 x 100mm & TPX30 x 100mm. Specifcation Dimensions: 265 x 142 x 50mm.Weight: 0.6kg.
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 18mmLength: 78mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 28mmLength: 78mm
This Teng Tools 16 piece set consists of 3/8 inch drive regular 6 point sockets. The sockets are manufactured from chrome vanadium steel for strength and durability and have a satin chrome finish. They are supplied on a clip rail, which is ideal for both wall mounting and for use in a toolbox. The set comprises the following socket sizes:7-22mm.
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 21mmLength: 38mm
The Primaflow Oppl Optima Plus Rad Valve Angle 10mm is designed for efficient home heating. This manual radiator valve allows for precise control of your radiator's temperature, ensuring optimal comfort in your living space.
High-Quality Construction: Made from durable materials for long-lasting performance.
Easy Installation: Designed for straightforward setup, compatible with standard radiator systems.
Adjustable Flow Control: Allows you to easily regulate the heat output of your radiator.
Compact Design: The angle shape fits well in tight spaces, making it ideal for various installations.
Versatile Use: Suitable for residential and commercial heating applications.
A professional, deep, 3/8 drive hexagonal AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.Size: 9/16 AF.Overall length, 50mm
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size. 30 x 32mm.Length. 362mm.
The Teng FC01 Protective Wing Cover is made from a heavy-duty red PVC front complete with the Teng Tools eyes, a soft cloth backing and a full length magnetic strip, which ensures the cover stays firmly in place without damaging the side of the vehicle. Protects vehicle bodywork from scratches, drops and spills whilst working on vehicles. Specification: Size (W x L): 40 x 107cm
The Teng Tools Mega Bite Heavy-Duty Combi Pliers have a single joint design. They are made from a chrome molybdenum alloy steel with an 80° cutting edge angle. The cutting jaws have a pipe grip and serrated grip surfaces. Confrom to DIN 5746.These Teng Mega Bite Heavy-Duty Combi Pliers have ergonomically designed two component handles.
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 28mmLength: 38mm
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 12mmLength: 38mm
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 14mmLength: 38mm
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.The TENM380520 Hex Socket has the following specifications: Size: 20mm. Overall length: 29mm.
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 11mm
A professional 1/4in square drive matt chromed deep hexagon socket. Produced in accordance with ISO 9000 and AS 954 specifications. Features the Teng Tools hip grip system for increased torque and reduced risk of rounding fasteners. Overall Length: 49.5mm.Size 7mm
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940636 Impact Socket has the following specifications: Length: 95mm.Size: 36mm.
Doff Multipurpose Lawn Seed gives a superior lawn finish with a lush green colour. The direct sow seeds are easy-to-use and apply, and are disliked by birds. They have a +PROCOAT coating to ensure quality results.Size: 500gCoverage: Up to 20m²
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 35mmLength: 78mm
Teng Tools impact sockets are specifically designed for use with power tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality.The sockets have a 3/8 inch drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.1 x Teng Impact Socket Hexagon 6 Point 3/8in Drive 8mm
The Teng Ball Point hexagon key set of 7 hex keys are made from chrome vanadium steel for increased strength and durability and are supplied in a plastic holder for convenient storage. Each key has a short arm and a long arm. The short arm allows excellent leverage and torque, whilst the longer arm allows access in more difficult to reach areas. In addition the long arms have a ball point head, which permits turning at up to a 30º angle.This Teng Tools 7-piece set of hex keys comprises the following sizes:2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.
The Teng 6508RMM Combination Spanner Set contains 8 professional quality, 72-tooth ratchet combination spanners, each with flip reverse action for changing direction. Supplied in a handy storage wallet. Contains the following sizes: 8, 10, 11, 12, 13, 14, 17 and 19mm.
The Abracs Phoenix II Flat Metal Cutting Disc is designed for precision cutting of metal materials. With a diameter of 115mm and a thickness of 3mm, this disc is perfect for various metal cutting applications.
High-Performance Cutting: Engineered for efficient metal cutting.
Durable Construction: Made to withstand rigorous use.
Compatible Size: Fits standard 22mm arbor for easy installation.
Versatile Use: Ideal for both DIY and professional projects.
Quality Assurance: Manufactured by Abracs, a trusted name in abrasives.
Quantity: Box of 25 discs for ample supply.
