The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 32 mm.Length : 165 mm.
Sadolin Classic Wood Protection absorbs deeply into the timber to provide exceptional protection against the weather. Effective on large areas of timber such as cladding, fascias, decking and rough sawn timber. It is also ideal as a base stain on new joinery which is to be subsequently treated with Sadolin Extra. Not suitable to use on surfaces previously coated with a medium/high build coating. Specification: Coverage: Planed Softwood/Hardwood up to 15m²/litre; Rough Sawn Timber up to 8m²/litreDrying Time: Touch Dry 4-6 hours; Recoat: 16-24 hoursThis Sadolin Classic Wood Protection has the following specification: Colour: NaturalSize: 2.5 Litre
The Scan chemical splash resistant coverall is a light yet strong microporous laminate coverall. It is soft and comfortable and acts as an excellent chemical and hazard barrier. With anti-static and non-linting properties, it is ideal for use in aerospace, chemical handling, disease and disaster management, forensics and waste management industries. It has a two-way zip with re-sealable adhesive storm flap. Features: Elasticated 3-piece hood.Elasticated back .Elasticated ankles.Knitted cuffs.Anti static.Latex and silicone free.Asbestos and chemical protection. Manufactured to the following EU standards: CE PPE Category III. Type 5 EN 13982-1. Type 6 EN 13034. Anti-static EN 1149-1:2008. Bio-Hazard EN 14126. Colour: White.Size: Medium.
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M6 x 50 Bag 10
The DEWALT Challenger Sympatex Waterproof Hiker Boots have a full grain nubuck leather upper with a Sympatex waterproof and breathable membrane. The TPU sole is resistant to petrol, chemicals, oil and temperatures up to 120°C. The sole is anti-static for increased user protection. The boots have a lightweight and flexible design with shock absorption and a steel toecap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection and a dual density anti-bacterial insole. Available in Black or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: S3-WR.Slip Rating: SRA.The DEWALT Challenger Sympatex Boots have the following specification: Colour: Brown.Size: UK 12 Euro 47.
The Knipex 95 12 200 cable shears with twin cutting edges are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors. These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material. The 95 12 200 200mm cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings. Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. Length: 200mm (8in).Cutting Capacity: 20mm.These Knipex Cable Shears are fitted with multi-component handles.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 1/2in.Working length: 101mm.Overall length: 151mm.
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners. The sockets are available in a range of metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS13 socket has the following specifications:Socket size: 13.0mm.Length: 36mm.Weight: 55g.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 7.50mmWorking length: 69mm.Overall length: 109mm.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
The Bollé Safety BAXTER Safety Glasses provide the comfort of a safety spectacle with the fit and seal of a goggle. They have an interchangeable foam seal which gives added brow and cheek protection and a fully adjustable strap that can also be removed if required. The glasses are fitted with optical class 1 polycarbonate lenses that have a Platinum® double sided anti-scratch and anti-fog coating. With a wrap around base 8 curve for a fantastic field of view and side ventilation and straight sports temples. Conforms to EN166 1BT KN.These Bollé Safety BAXTER Safety Glasses have smoke colour lenses. They are approved for permanent wear and certified with perfect optical quality. Designed and used for protection against UVA/UVB and solar radiation, 99.9% UVA/UVB protection. Specification Lens Type: Smoke, Anti-Fog and Anti-Scratch.Lens Conforms to: EN1661F/EN172 Solar 5-3,1.Frame Conforms to: EN166FT.
The DEWALT Apprentice Hiker Boots have nubuck and full grain leather uppers which are hard-wearing with antibacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.The DEWALT Apprentice Nubuck Hiker Boots have the following specification: Colour: Brown.Size: UK 11 Euro 45.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High SpeedDiameter: 43mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 20.0 mm HSS.Working length: 84mm.Overall length: 157mm.
The Scan Texas Lined Rigger Boots are ideal for the construction and haulage industries and outdoor workers. They have grained leather uppers that offer excellent resistance against abrasion. With anti-static, energy absorbent polyurethane soles for comfort, strength and durability. The boots are fleece lined with cushioned insoles and arch support for additional comfort. Fitted with steel toecaps and midsoles for penetration resistance. They also have padded ankle protectors, a rear scuff guard and 'Pull-on' style for ease and comfort. The soles are resistant to oil, acid, alkaline, heat (180°C) and penetration. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRC.1 x Pair of Scan Texas Lined Tan Rigger Boots UK 6 Euro 39.
The Faithfull 8-in-1 Multi Blade Knife features a high quality, 57mm stainless steel main blade. Additionally it features a 6mm flat driver / bottle opener, scissors, can opener, hook, corkscrew, awl and a small knife blade. Fitted with an ergonomic hardwood handle and a hanging loop.
The Stabila 80 ASM Magnetic Spirit Level has an extra-strong, rare-earth magnet system for adhesion to metal objects, leaving hands free when aligning and adjusting pillars and supports. They are up to 5x stronger than standard ferrite magnets. With 2 high-quality Stabila vials for optimum readability. They are made from a highly transparent, hard-wearing acrylic glass with precision-ground inner contours and fluorescent vial liquid. It has a rectangular aluminium profile with reinforcing ribs for high stability and a secure grip. With 2 measuring surfaces for accurate measuring in all positions. Plastic end caps protect the profile against impact. Fitted with anti-slip stoppers that prevent the level from slipping. The level is easy to clean thanks to its electrostatic powder coating. Especially suitable for measuring tasks in metal construction and drywall construction. Stabila installation technology ensures long-term accuracy. They have a measuring accuracy of ±0.5 mm/m in a normal position and ±0.75 mm/m in reverse position.1 x Stabila 80 ASM Magnetic Spirit Level 2 Vial 19178 60cm
The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 2.5mm.Total length: 57mm.Working Length: 30mm.
The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP420LS Pre Pack HSS Jobber Drills(2) Long Series 4.20mm have the following specifications:Diameter: 4.2mm Overall Length: 119mm
The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 8mm.Working Length: 75mm.Overall Length: 120mm.
The DEWALT HSS G Jobber Drill Bit is a precision ground twist drill bit for rapid drilling, long life and excellent concentricity. It has been manufactured from High Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right hand cutting, type N flute with a precision ground end at 118° point angle.This DEWALT HSS-G Jobber Drill Bit has the following specification: Diameter: 7.0mm.Length: 109mm.Working Length: 69mm.Pack Quantity: 1.
IRWIN Record 09 1/2 Adjustable Block Plane ideal for end grain and general purpose finishing. Fully adjustable for depth of cut with a screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarseor fine work and a 21° cutter angle. Cutter Width: 42mm (1.5/8 in).Length: 152mm (6 in).
The Hozelock Soaker Hose is a porous hose, ideal for watering beds and borders. The water seeps from the hose providing gentle watering without waste. It is ideal for establishing young plants and hedges, and can be buried under the soil. Supplied complete with connectors which allow several hose lengths to be joined together for a larger area coverage. Available in various lengths. Comes with a 2 year guarantee.This Hozelock Porous Soaker Hose has the following specifications: Length: 10 metresDiameter: 12.5mm (1/2in)
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 6.0 x 90mm Box 100
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The Faithfull External Spring Calipers have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 100mm (4 in)
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: OX.Adjustment: 18 - 25mm.
The Master Lock ProSeries® Weather Tough® Padlocks is designed to endure the toughest security applications by providing extra protection against corrosion, abuse and attack. They have tough boron alloy shackles, dual ball bearing locking mechanisms for maximum pry resistance and layered laminated steel cores for strength. Ideal for harsh outdoor conditions, the Weather Tough® xenoy outer casing delivers excellent weather resilience, protecting the lock from water, ice, dirt and grime. The precision pin cylinder delivers optimal pick resistance and is protected by a snap-on cap. All Master Lock Pro Series™ Padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: gates, sheds, storage units, fences, containers and chains.This Master Lock ProSeries® Weather Tough® Padlock has a precision 6-pin cylinder and the following specifications: Body Width: 67mmShackle Thickness: 11mmShackle Width x Height: 35 x 23mmType: Keyed Alike, Key Retaining
High quality adjustable, copper pipe cutter tool that ensures a square even cut.All parts liable to wear are heat treated.For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273.Capacity: 12 - 43mm.
The Lessman Plasterers Brush has a beechwood body with hardened steel pins. Used for roughening and structuring of plaster, prior to a final surface coat. This process ensures good adhesion of the final coat. Size: 190 x 95mm (7.1/2 x 3.3/4in).
The Scan Viper SBP Safety Boots have a full grain leather upper, 200-joule steel toecap and penetration resistant steel midsole. Fitted with a dual-density PU outsole, this cushioned sole ensures high levels of comfort. There is also an energy-absorbing heel that maintains comfort over long periods. The fuel and oil-resistant, SRC-rated slip-resistant sole increases wear safety, making these boots ideal for tradesmen. Conforms to EN ISO 20345Safety Rating: SBPSlip Rating: SRC
1 x Pair of Scan Viper SBP Safety Boots UK 4 EUR 37
The DEWALT Protector™ Safety Glasses have an ergonomic, ultralight design that provides an extremely comfortable fit for both men and women. ToughCoat™ hard coated lenses, provides tough protection against scratches. The distortion free lens reduces eye fatigue and is made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provide a secure, comfortable fit. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Protector™ Safety Glasses have Smoke lenses.
The DEWALT Reinforcer™ Safety Glasses feature ToughCoat™ hard coated lenses, that provides tough protection against scratches. The distortion free lenses reduce eye fatigue and are made from polycarbonate, to protect against impact resistance. The rubber-tipped temples provides a secure, comfortable fit whilst the soft, rubber nosepiece offers maximum all-day comfort. Conform to EN1661F standards. Offer 99.9% UVA/UVB Protection.These DEWALT Reinforcer™ Safety Glasses have Fire Mirror lenses.
RUBI Long Leg Tile Spacers for large ceramic format and rectified. Made with a quality base material, without impurities or imperfections.Specifications:Size: 3/32in (2mm).
Pack of 1,000 RUBI Long Leg Tile Spacers 3/32in (2mm).
These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied pre packed with the following specification: Diameter: 6.5mm.Overall Length:Working Length:Pack Size: 1.
