The Roughneck Micro Fork is an industrial grade fork, only smaller, which can be used in confined spaces or by people who find using a full size fork difficult. It has a lightweight fibreglass handle with an ergonomic polypropylene YD grip. Overall length: 740mm (29in).
The Roughneck ROU65510 Twister Wood Wedge is drop forged, hardened and tempered. This is a dynamic wood wedge which twists as it enters the log and splits the log into 2 pieces. Weight: 2.27 kg. (5 lb.)
Aluminium landscape rake for raking bark, wood chippings, leaf mulch and lightweight gravel etc. With a 170cm / 67in fibreglass handle.The wide head covers large areas easily. Invert the rake to flatten a surface.The Roughneck ROU68624 Aluminium Landscape Rake has the following specifications:Rake width : 600mm / 24 inch.
The DEWALT DCH273 Brushless XR SDS Plus Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. With a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. The brushless motor and high capacity XR 18V 5.0Ah Lithium-ion battery platform provide extreme run time and reduced maintenance. It is fitted with an electronic clutch for consistently high torque and improved durability and is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. DCH273P2: 2 x 18V 5.0Ah Li-ion BatteriesDCH273N: Bare Unit, No Battery or Charger Specification: Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg Hand/Arm Vibration: Drilling 6.6m/s², Chiselling 5.4m/s², Metal 2.5m/s²Uncertainty: K1/K2/K3 (Vibration): 1.5m/s² Sound Pressure: 86 dBASound Pressure Uncertainty: 3 dBASound Power: 97 dBASound Power Uncertainty: 3 dBAThe DEWALT DCH273P2 Brushless XR 3 Mode Hammer is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x Multi-Voltage XR Li-Ion Charger1 x Belt Hook1 x Multi-Position Side Handle1 x Heavy-Duty Kitbox
The 'Roughneck' ROU64965 5 piece multi-purpose bar set consists of one each of the following:- 12 inch x 1/2 inch hex Traditional Wrecking Bar...Suitable for pulling large nails, wrecking and dismantling.18 inch x 5/8 inch hex Traditional Wrecking Bar...Suitable for pulling large nails, wrecking and dismantling.7 inch Utility Bar...Suitable for pulling nails, wrecking, dismantling and prying.15 inch Utility Bar...Suitable for pulling large nails, wrecking, dismantling and prying.24 inch x 3/4 inch Aligning Bar...Suitable for prying and aligning bolt holes and connecting hardware.
EVO-STIK GRIPFILL MAX is a maximum strength, zero solvent, all weather adhesive. It utilises next generation advanced SM polymer bonding technology enabling it to bond to most porous and non-porous building surfaces, anywhere, even in vertical applications. Size: C30 350ml
The Swarfega® Extreme Heavy-duty Hand Cleaner comes with non-abrasive scrubbing agents and surfactants for efficient cleaning of deeply ingrained and difficult to remove dirt and grime such as oil, grease, tar, inks, bitumen, many adhesives and most oil based paints. Solvent-free. With orange fragrance. Leaves hands clean and fresh after use.
1 x Swarfega® Extreme Pump Bottle 1 litre
The Evo-Stik Waterproof Wall Tile Adhesive is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles, glazed bricks and painted surfaces. The waterproof and non-slip formulation has an extended open time, making it quick and easy to apply. The colour is an off-white and coverage with a Notched trowel is 1.2 m² per litre, Solid Bed 0.3 m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. NOTE that different trowels often apply the adhesive at different rates, usually greater than the above. Tested to EN 12004.Evo-Stik Waterproof Wall Tile Adhesive has the following specification: Size: 2.5 Litre.
Workpieces with straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines can all be quickly and accurately located with this handy tool. Made of tool steel, hardened, ground and lapped.Description: Double endBody diameter: 0.500 Inch Contact diameter: 0.200 Inch and pointed contact
STATUS® Extension Lead with a neon indicator for added safety. Ideal for indoor power applications. Made with high-quality materials for reliable performance and safety.
1 x STATUS® Extension Lead 240V 4-Gang 13A White 4m
These Forgefix High Tensile Hex Head Bolts are made from 8.8 grade steel. The bolts are part threaded and conform to DIN 933 standards. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools. APPLICATION:For fastening together numerous types of material or to be fastened into pre-tapped holes. Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrityHigh Tensile Bolts ZP M12 x 130 Bag 5
Experience the ultimate in shower luxury with the Grohe Tempesta 250 Shower System featuring a diverter. This stylish and functional shower system is designed to enhance your daily routine.
High-Quality Chrome Finish: Ensures durability and a sleek look.
Easy Installation: Designed for quick and hassle-free setup.
Versatile Shower Options: Enjoy multiple spray patterns for a customized experience.
Efficient Water Flow: Engineered for optimal performance and water conservation.
Compatible with Various Plumbing Systems: Ideal for both DIY and professional installations.
The Bahco HRFM-10 Filemaster with an ERGO™ handle suitable for use on ferrous and non-ferrous metals, plastics, laminates and hard woods. The half round HRFM10 variant tapers towards the point and has milled, curved teeth. The concave back is uncut. Size: 250mm (10in).
Bahco 3802 HSS Power Blade is a high speed steel powersaw blade designed for cutting almost any material. Suitable for use on modern machines with a high degree of control.Size 300mm (12 in) x 25mm (1 in) x 10 tpi
Discover the versatility of our Black Plastic Cover Caps, designed specifically for M16 nuts and bolts. These caps provide a sleek finish while protecting your fasteners from dirt and damage.
Durable Material: Made from high-quality plastic for long-lasting use.
Easy Installation: Simply push fit onto M16 nuts or bolts for a secure fit.
Protective Cover: Shields fasteners from corrosion and environmental factors.
Versatile Use: Ideal for various applications in DIY and professional settings.
Neat Appearance: Provides a clean and finished look to your projects.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Discover the reliability of Unifix Grade 4.8 Cup Square Hex Bolts and Nuts, designed for various structural applications. These M10 x 130 bolts are made to meet high standards of quality and durability.
High-Quality Grade 4.8 Steel for Strength
Compliant with DIN 603/555 Standards
Bright Zinc Plated for Corrosion Resistance
Easy to Install with Standard Tools
Ideal for Use in Construction and Engineering Projects
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. Length: 100mm (4in).Size 4 x 100mm (5/32 x 4 in)
A medium density 130mm (5in) polishing foam. For general use. Use with the kit FLE88005 backing pad or the drill backing pad FLE88010.With GRIP® fastening.Made in Great Britain.
The Unifix Grade 8.8 High Tensile Hexagon Bolts DIN 931 Bright Zinc Plated - M24 x 200 are designed for high tensile applications, ensuring durability and reliability in various construction projects.
High Tensile Strength: Ideal for heavy-duty applications.
Durable Bright Zinc Plated Coating: Provides excellent corrosion resistance.
Standard DIN 931 Compliance: Meets industry standards for quality.
Easy Installation: Compatible with standard hexagon nuts.
Versatile Use: Suitable for a wide range of construction and engineering projects.
The Bright Zinc Plated Straining Eye Bolts are designed for robust straining applications. Each bolt is welded and comes complete with one nut and one washer, ensuring secure fastening. Ideal for various construction and DIY projects.
High-Quality Bright Zinc Plated Finish for Durability
Includes 1 Nut and 1 Washer for Easy Installation
Perfect for Straining Applications in Construction
Welded Design for Enhanced Strength
Size: 8 x 3/8 for Versatile Use
Quantity: Box of 20
The Unifix Grade 10.9 High Tensile Hexagon Setscrews DIN 933 Plain - M24 x 60 are designed for high tensile applications, ensuring durability and reliability in various fastening tasks.
High Tensile Strength: Grade 10.9 ensures superior strength and performance.
Versatile Use: Ideal for a wide range of applications in construction and engineering.
Durable Material: Made from high-quality steel for long-lasting use.
Easy Installation: Hexagon head design allows for easy tightening with standard tools.
Precision Engineering: Manufactured to DIN 933 standards for consistent quality.
The Facom Power Bar is a hinged 3/8 in drive breaker bar for loosening tight nuts and bolts. It features a stiffened hinge joint for excellent durability, and a non-slip PVC handle which ensures excellent grip and comfort. Chrome finish. Performance: Conforms to ISO 3315, DIN 3122 and NF ISO 3315. Overall length 260mm.
Discover the versatility of our White Plastic Cover Caps, designed specifically for M10 nuts and bolts. These caps provide a clean finish and protect against dirt and moisture.
High-Quality Material: Made from durable plastic for long-lasting use.
Easy Installation: Simply push fit onto M10 nuts or bolts for a secure fit.
Protective Cover: Shields nuts and bolts from corrosion and damage.
Versatile Use: Ideal for various applications in DIY and professional settings.
Clean Aesthetic: Provides a neat and tidy appearance to your projects.
Extra long pin punch. Hardened and tempered with a knurled grip. The drive pin sections are 90mm (3.1/2in) long and the diameters of the punches are slightly under the sizes listed. Length: 200mm (8in).Size 5mm (3/16 in)
The JCP Fixings Nylon Frame Fixings ZYP are designed for reliable and secure mounting in various applications. Each fixing measures 8 x 80mm and comes in a convenient box of 50, making them ideal for both DIY projects and professional use.
High-Quality Nylon Material for Durability
8 x 80mm Size for Versatile Applications
Box of 50 for Convenient Use
Designed for Secure Mounting in Frames
Easy to Install for Quick Projects
RIDGID Tongue & Groove (Slip Joint) Pliers feature a flush rivet design which provides a stronger tool and allows access to tighter areas. The pliers have been forged and heat-treated for extended life and durability. Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance. They are fitted with cushioned grips that are designed for comfort only. They are NOT intended as insulation against electric shock.RIDGID 734 Tongue & Groove Pliers Length: 254mm (10in).Capacity: 51mm (2in).Weight: 0.40kg.
The Unifix Grade 8.8 High Tensile Hexagon Bolts DIN 931 Bright Zinc Plated - M18 x 70 are designed for high tensile applications, ensuring durability and reliability in various fastening tasks.
High Tensile Strength: Ideal for heavy-duty applications.
Durable Bright Zinc Plated Finish: Provides corrosion resistance for longevity.
Standard DIN 931 Specification: Ensures compatibility with various fittings.
Easy Installation: Hexagon head design allows for easy tightening.
Versatile Use: Suitable for construction, automotive, and machinery applications.
The Unifix Grade 12.9 Socket Head Cap Screws DIN 912 Plain - M16 x 110 are designed for high-strength applications, ensuring durability and reliability in various fastening tasks.
High-Strength Grade 12.9 Material for Enhanced Durability
Socket Head Design Allows for Easy Installation with Hex Key
DIN 912 Standard Ensures Compatibility with Industry Requirements
Corrosion-Resistant Surface for Longevity in Various Environments
Ideal for Use in Machinery, Automotive, and Structural Applications
The Bosch EXPERT Thick Tough Metal Reciprocating Saw Blade not only cuts thick metal, it offers exceptional lifespan in the toughest of applications. It has a wide body for precise, straight cuts. Fits all S-shank reciprocating saws.
Pack of 10 Bosch EXPERT Thick Tough Metal S1155CHC Reciprocating Blades 225mm x 8 TPI.
