The Bosch EXPERT HEX-9 Multi Construction Drill Bits offer high precision drilling in multiple materials; soft concrete, masonry, brick, ceramics, tiles, wood, plastic, sheet metals and aluminium. Accurate drilling is easier with Bosch Centering Geometry. The specially designed centring tip allows you to start holes accurately. This high-performance carbide tip is manufactured by fine grinding.The optimised dust extraction channel allows for fast, efficient drilling. Its hex shank provides a strong connection and maximum torque transmission in three-jaw chucks and 1/4in internal hex tool holders. The Bosch EXPERT HEX-9 Multi Construction Drill Bit is the one drill bit which should always be in your toolbox: you'll never get stuck on a job or waste time looking for the right bit.
1 x Bosch EXPERT HEX-9 Multi Construction Drill Bit 5.5 x 60 x 100mm
The Bosch PRO SDS plus-5X Hammer Drill Bits are made from an embedded cross of high-quality tungsten carbide, the 4-cutter head offers convenience to professionals who need to drill accurate holes in reinforced concrete. Its 4 flutes channel dust away from the impact point, ensuring effective and long-lasting performance. Reinforced concrete is a common material in infrastructure, commercial and domestic construction, and workers such as electricians, plumbers or HVAC installers often need to drill into it. PRO SDS plus-5X Hammer Drill Bits are designed for this tough task.
1 x Bosch PRO SDS plus-5X Hammer Drill Bit 9.0 x 100 x 160mm
The Makita TW001G XGT 40Vmax BL Impact Wrench has an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. Its 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. There is also a reverse rotation auto stop mode, this stops after the bolt/nut loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. Its also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 3/4in Square C Ring.No Load Speed: 0-950/1,150/1,400/1,800/min.Impact Rate: 0-1,900/2,200/2,400/2,500/bpm.Max. Torque: 1,800Nm.Nut Busting Torque: 2,050Nm.Bolt Capacity: Standard: M12-M36.
The Makita TW001GZ01 XGT 40Vmax BL Impact Wrench is supplied in a MAKPAC as a Bare Unit - No Battery or Charger.
RUBI TVA 115 SUPERPRO Turbo Viper Diamond Blade for cutting hard materials such as granite, rustic tiles, klinker, refractory, slate, quartzite and porcelain tile. This diamond band offers greater speed of cutting harder materials without sacrificing finish quality. Only for straight cuts, not suitable for mitring.Specifications:Diameter: 115mm.Bore: 22.2mm.Thickness: 1.4mm.
SMARTORA White No1 Cotton Wipers are made from second grade hotel bed linen and pillow cases material. Cotton rich with a high absorbency and low lint. Material may contain minor indelible stains but won’t affect performance. Manufactured from recycled linen. Washable and reusable.10kg vacuumed packed in a recyclable plastic bag which is durable and keeps the wipers perfectly dry.
The STANLEY Atlanta Waterproof Safety Boots made in premium Nubuck leather, with a breathable waterproof membrane (inside the boot). Fitted with a steel toe and midsole for increased safety. The rubber and PU dual density sole not only gives great comfort but is also anti-slip and anti static. There is also an additional external toe cap and heal support. This is an all round great boot for any construction worker.
1 x Pair of STANLEY Atlanta Waterproof Safety Boots UK 8 EUR 42.
The Scan Tri Fold Valved Disposable Mask with a FFP3 protection level, these masks will protect lungs against very fine particles (less than 2 microns). Designed to cover the nose, mouth and chin. The three panel system offers a high level of manoeuvrability allowing for a better seal, and the exhalation valve makes breathing easier. They are flat folding for easy pocket storage.The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and full PVC face seal for custom fitting. The non-irritating inner face piece ensures added comfort.To be disposed of after each period of work or 4 hour shift. They are ideal for use with: loft insulation, hardwood dust & cutting MDF, stone cutting and plastering.Conforms to EN149:2001 and A1:2009.
This 14 Piece Bosch EXPERT Multi Material PC Plus Hole Saw Set. A great all-rounder for every professional. Ground and sharpened fine carbide teeth provide increased strength, durability and precision. It's slot design allows for a better view and plug ejection.Supplied in a handy storage box with transparent cover. Contains:11 x EXPERT Multi Material PC Plus Hole Saws: 20, 22, 25, 32, 35, 40, 44, 51, 60, 68, 76mm1 x EXPERT Power Change Plus Arbor1 x HSS-G Pilot Drill Bit 7.5 x 105mm1 x TCT Pilot Drill Bit 7.5 x 105mm
The Bosch Starlock HCS Plunge Cut Saw Blade made for precise and clean cuts in wood. Perfect for carpentry, woodworking, and DIY projects. The Starlock mount provides optimum power transfer and convenient blade change within 3 seconds. The mounting system produces the highest power transfer due to a 3-dimensional tight-fitting connection between machine and accessory.Specifications:Width: 24mmDepth: 50mm
The Hotspot glass fibre woven Stove Rope is suitable for most solid fuel stoves & boilers. Use with Heatbond Stove Rope Fixative.
1 x Hotspot Stove Rope 8mm x 2m.
Pack of 2 Yale Locks Brass Padlocks 20mm. Each padlock has a steel shackle and 4 pin cylinder with single locking feature. Tested up to 48 hours for corrosion resistance to ensure protection against different weather conditions. Specifications: Body Width: 21.4mm. Body Height: 21.8mm. Body Depth: 10mm. Shackle Diameter: 3.3mm. Shackle Height: 23.5mm. Shackle Width: 10.8mm. The Yale Locks Brass Padlocks are constructed from hard wearing boron, and are rigorously tested against corrosion. The 4 pin cylinder with single locking feature (20mm) and 5 pin cylinder with double locking feature (30 60mm). 20mm (2 Pack)
The LENOX MetalWolf Wave Edge Reciprocating Saw Blades have been designed for repetitive, everyday use with metals, these saw blades deliver up to 50% longer life (vs. prior LENOX generation) thanks to WAVE EDGE technology which is designed to improve longevity. The high-speed edge helps you get the most out of your reciprocating saw while the steel backing assists in reducing breakage when cutting metal. Patented T2 technology optimises chip removal for an efficient cut in a wide range of materials.
Pack of 5 LENOX MetalWolf Wave Edge Reciprocating Saw Blades 229 x 25 x 1.1mm 18 TPI.Application: Medium Metal.
The ROUGHNECK COLT 600E Sawhorse is a tough and stable. Its heavy-duty steel construction ensures strength and durability when it matters most. Each COLT 600E Sawhorse stands its ground with an impressive weight-bearing capacity of 589kg, a substantial 1178kg when used as a pair. Powder-coated for added resilience, these sawhorses boast a rugged exterior that stands up to the toughest environments. Independently height-adjustable legs, constructed from heavy gauge steel, for increased stability. Pivoting feet ensure a steadfast grip, rubber pads adding an extra layer of support and surface protection. Working height is customisable from 630-820mm, with stability ensured through secure locking at 28mm intervals. Unique to the COLT 600E the innovative Pipe-Prop feature conveniently holds 15mm and 22mm pipes, rods, and dowels ready for cutting. Sheet material support arms facilitating upright cutting with ease, accommodating larger pieces effortlessly with just one sawhorse. Extendable timber supports adjust to fit 2x4s or 4x4s. This transforms two sawhorses into a stable, sturdy worktable, providing a versatile platform ready for hard graft. Specifications: Max. Distributed Load: Single 589kg (1300 lbs), Pair 1,178kg (2,600 lbs).Working Height: 630-820mm.
1 x ROUGHNECK COLT 600E Sawhorse.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 3.2mm.
Briwax Wax Polish is a blend of beeswax and carnauba wax suitable for applying to bare wood or over Sanding Sealer. A natural wax wood finishing treatment, it gives an instant, long-lasting sheen suitable for all types of wood. Ideal for wood carvings and turned wood, for floors and skirtings. This wax polish also cleans and protects tiles, metalwork, marble and melamine etc. Easy to apply and buff, and it dries quickly. Application: Apply with 0000 steel wool, Briwax brushes or cloth. Can be applied directly to timber or onto Briwax Shellac Sanding Sealer. Available in clear, which maintains the natural colour of the wood, and various wood shades to stain and wax in one operation. 1 x Briwax Wax Polish Original Clear 200g.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/60 Brass Padlock has the following specification: ABUS Security Level: 6. Shackle Width: 33mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 60mm.Overall Height: 97mm.Overall Depth: 19mm.
The Union 2177 3 lever mortice deadlocks are ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side, and has a 12.5mm anti-saw deadbolt. The striking plate is finished to match the forend. Deadbolt Brass, with hardened steel rollersRebate Kit 2969 (13mm, 19mm or 25mm)Keying Groups May be supplied to pass, differ and keyed alike with 2077, 2157, 2277 and 2477Supplied with 2 steel nickel plated keysKeying 100 standard differs (numbers from M101M to M200M) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass (Striking Plate Security box type, finished to match forend) Case Size: 65mm x 70mm (2.5in) Backset: 44.5mm This is the measurement from the edge of the door to the centre of the keyhole. Pack: Visi
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Chrome Finish (Striking Plate Security box type, finished to match forend) Case Size: 76mm x 102mm (3in) Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Visi
The Union 3G114 C-Series BS 5 Lever Mortice Deadlocks are suitable for use on timber doors hinged on the left or right with the keys being suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 20mm bolt throw. The 3G114 mortice deadlocks are supplied with one plain escutcheon and one escutcheon with a cover plate, finished to match the faceplate/strike. The 3G114 series locks are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. Case: Silver powder coatBox Strike Assembly: Painted to match forendDeadbolt: Brass, with hardened steel rollersKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit: B-3G114R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Visi packed.Forend Finish: Satin Chrome Case Size: 80mm x 77mm (3in) Backset: 53mm This is the measurement from the edge of the door to the centre of the keyhole.
The Teng 1/2in Hex Bit Impact Socket is made from chrome molybdenum with a black finish. Fitted with a locking pin and retaining ring facility. Each socket is individually branded and size marked for quick identification.This Teng 1/2in Hex Bit Impact Socket has the following specification: Size: 10mmLength: 78mm
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 3316R Firm Joint Outside Calipers have the following specification: Size: 150mm (6in).
The Union 2234E 5 Lever British Standard Mortice sashlock is ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The 20mm deadbolt is locked or unlocked by the key from either side, for secure positive deadlocking and additional resistance against attack. This 2234E features an anti-pick, anti-saw and anti-drill security, Chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult, Supplied with covered escutcheon to match forend. This lock has an unique pierced casing to accept bolt through door furniture. The 2234E series locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 15 Year guarantee. Deadbolt Brass, with hardened steel rollersRebate Kit 2964 (13mm, 19mm or 25mm)Supplied with 3 steel nickel plated keys The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock isForend Finish: Brass (Striking Plate Security box type, finished to match forend) Case Size: 67mm x 111mm (2.5in) Backset: 45mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Boxed
Ash Handle with Plastic 'D' Grip. Is an ideal tool for shoveling out or backfilling trenches, concrete mixing, working tarmac and moving cement chippings etc. With an unvarnished hardwood shaft for strength and durability. The Standard Contractor range is designed with the usual Bulldog attention to detail but aimed at the budget-conscious contractor. Size: No.2. Blade: 315 x 250mm.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 20.0mm.Total length: 160mm.Working Length: 80mm.
The RIDGID Water Pump Pliers are made from extremely durable chrome-vanadium steel and a new jaw design that provides instant grip on pipe so there is no need to continually squeeze both handles.RIDGID 240 Water Pump Plier Length: 240mm (9.1/2in).Capacity: 32mm (1.1/4in).Weight: 0.3kg.
Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 50mm.Pack quantity: 100.
The Yale PM444 series security door bolts are concealed (mortice fixed) into the door with a bolt which throws into the door frame. Operated by using the key supplied giveing added securiy and extra protection to your home.The Yale YALPM444PB lock is finished in brass, has a 2 year guarantee and is supplied with 1 x key
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 20mm.Box quantity: 200.
Bahco Professional Mitre Handsaw for cutting plaster and boards of a wood based material. With a two-component handle which ensures a comfortable and safe grip. Specially developed toothing with new super sharp GT-toothing for the first 100mm (at the tip), followed by groups of four teeth with an extra large gullet between groups for greater efficiency and minimised clogging. Blade Length: 500mm (20in).Teeth: 9 tpi.
The DEWALT Laser Safety Hiker Boots have full grain leather uppers with a breathable, waterproof comfort insole for comfortable all day wear. The padded tongue and collar provide additional comfort. Has a 200 Joule steel toecap, with a steel midsole for underfoot protection. The TPU dual density outsole is anti-static. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRA.1 x Pair of DEWALT Laser Safety Hiker Black Boots UK 9 Euro 43
The Knipex 74 02 range of diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 21% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 02 series comes in 160, 180, 200 and 250mm versions with Comfort grip handles for added comfort and a better grip. The 74 02 series pliers are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex range of nippers and cutters the 74 02 range of diagonal pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 64hrc.Length: 180mm (7 in).Cutting capacity: Med/hard wire: 3.8 mm.Hard wire: 2.7 mm.Piano wire: 2.2 mm.
Rustins Plastic Wood Tube is waterproof for inside and outside use. Can be cut, filed, drilled, sanded and planed. It can be painted, stained or varnished and when dry will take screws and nails. Many uses in and around the home.Rustins Plastic Wood Tube. Colour: Teak.
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 2400mm (8 ft)Section: 93 x 25mm (3 5/8 x 1 in)
