Bahco Insulated Phillips Screwdrivers are suitable for work on live equipment, up to 1,000 Volts. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The blades are made from high performance alloy steel, which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver is branded with part number, tip symbol and size for easier identification. They are each individually tested and manufactured according to IEC 60900 and conform to ISO 8764.Specifications: Tip: PH0.Blade length: 75mm.Total length: 170mm.
A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90° and 45° mitre slots as well as 22.5° slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw.Comes complete with Tenon Saw (Fine Tooth). Size: 310 x 130mm Maximum depth of cut: 80mm
This Faithfull Battery Tester is simple and easy to use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 batteries and 1.5V button cells and folds down for easy storage. Features: Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE:The tester is activated by the battery being checked. Keep test time as short as possible to avoid unneccessary battery drain.
The Teng Ball point hex keys are made from chrome vanadium steel for increased strength and durability and are supplied in a folding plastic holder for convenient storage. Each key has a short arm and a long arm. The short arm allows excellent leverage and torque, whilst the longer arm allows access in more difficult to reach areas. In addition the long arms have a ball point head, which permits turning at up to a 30º angle.This Teng Tools 9-piece set of hex keys comprises the following sizes:1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.
These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 112mm Bag 10
High-grade chalk designed to be used with chalk line reels. It is specifically packaged in a square bottle which is designed to not roll off work surfaces. The bottle features an easy-pouring, twist-to-open spout.1 x Stanley Tools Chalk Refill Red 113g Red is ideal for external masonry work and is indelible.
Connectors for use with grease guns.Conical connector for use with all style of grease nipples, by inserting point into ball check.Ideal for damaged nipples.1/8in BSP Thread Connection.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 8 mm.Cutting Depth: 25 mm.Shank Diameter: 1/4 in.
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 140mmBore size 12-25mm
BOSTIK - CONTACT ADHESIVE Extra Strong Contact Adhesive. Water-Resistant. Dries in minutes - immediate strength on contact. Ideal for DIY and household repairs. Ideal for sticking rubber, leather, wood and much more. Type. Contact.Size. 50ml.
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 125 x 6.5 x 22.23mm
The DEWALT DWST1-75651 Tool Belt is an ergonomic padded belt with breathable mesh for maximum comfort when holding heavy loads. The belt is made from heavy-duty leather and a strong, durable polyester fabric, 1200 denier. The belt is fully adjustable to suit all waist sizes and the 2-pin belt buckle ensures the belt is tightly secured and can carry heavy loads. Also includes steel d-ring hangers for use with braces. It is a customisable tool belt and can be used with any combination of the DEWALT pouches or holsters.
DEWALT DWV9400 Disposable Plastic Tank Liners allow users to quickly and efficiently empty the tank without releasing harmful dust to the environment. Suitable for D27901/ D27902. Supplied as a pack of 5.
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 680g (1 1/2lb)
The DEWALT DCG405FN XR Brushless Grinder has a flat head design for access to acute angles with a compact gear case for increased access to tight spaces. The powerful fan cooled motor is fitted with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater comfort and control whilst the rubber overmould provides enhanced grip and comfort. For added safety the electronic brake stops the wheel quickly when the trigger is released. Bare Unit, No Battery or Charger. Specification: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.8kg
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 40mm.Length: 152mm.
The Faithfull Engineers Square has been carefully crafted from high quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Size: 50mm (2in) External size: 70 x 50mmInternal size: 50 x 31mmStock thickness: 8.5mmBlade thickness: 1.7mm
Made from heavy-duty leather this tool pouch is double stitched for strength and riveted at stress points.Webbing belt is attached and will fit waists from 29in to 46in.Has 10 pockets for tools and nails, tape clip and two hammer loops. Size: 215 mm x 500 mm (8.1/2in x 20in)
Duck Tape® Colours is a range of brightly coloured and patterned tapes, which are excellent for crafting and imaginative projects. The tapes have the same quality as Original Duck Tape®, providing high-performance strength and adhesion. The tapes are waterproof too, although not suitable for total immersion in water. The tapes can be cut with scissors or torn by hand. Available in many colours and designs.This Duck Tape® Colours & Patterns comes in the following: Colour/Pattern: Rubber DuckWidth: 48mmLength: 18.2m
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 13.0mm.Working Length: 98mmOverall Length: 151mm.Pack Quantity: 1.
These Vitrex Essential Tile Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. Supplied in a resealable bag.The Vitrex 102014 Essential Tile Spacers have the following specifications: Size: 5mm. Pack quantity: 250.
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric graduations only. Blade Length: 10mBlade Width: 32mmAccuracy: EC Class II
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Gold Leaf.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 10.0mm.Working Length: 84mm.Overall Length: 133mm. Pack Quantity: 10.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 2-16-268 FatMax® Thru Tang Chisel 3 Piece Set includes 1/2, 3/4 and 1 inch chisels.
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: flat bastard.Tanged.
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1 x 8 Box 200
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: flat bastard.Tanged.
The Stanley FatMax® Parallel tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle provides great grip and reduced fatigue in use. Colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Parallel tips are ideal if the screw needs to be driven below the material surface.Type - Parallel Tip Size 2.5mmBlade Length 50mm (2 in)
This Scan Saftey sign is made from 1mm thick, durable PVC. It's aggressive waster-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 design criteria and helps limit company liability, should an accident occur. The SCA0175 safety sign has the following specifications:Size: 200 x 300mmMessage: This sign details a fire action procedure, including spaces to write the Fire Brigade phone number, and point of assembly.
These IRWIN Gilbow straight cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged.The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement.Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece.The original Gilbow cutting snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.Length: 250mm (10in).
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. FS14.Size. 100 x 25 x 11 x 5mm (4 X 1x 7/16 x 3/16 in).Grade.Fine. With 1 round edge.
The Roughneck Gorilla Bar Pro™ is an extremely high-quality tool designed for discerning users who are looking for a lightweight, yet very strong wrecking bar, to avoid fatigue during use and uncompromising performance. These bars are made from chrome vanadium steel, drop forged and the entire lengths are hardened and tempered to give extra strength. Their superior quality and durability means they will withstand extreme loads without deforming or breaking. The top of the bars and both ends are polished. The wide jaw prevents damage or marks on the support area.1 x Roughneck Gorilla Bar Pro™ 625mm (25in)
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 6.0 x 80mm.Box quantity: 100.
