MEXCO GPX10 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm
1 x MEXCO GPX10 Concrete Diamond Blade 300 x 20mm
The Bosch GKF 18V-8 Professional Cordless Palm Router features a powerful brushless motor. This palm router has the most compact height on the market to minimise top-heaviness and maximise tool control, hands-free spindle lock for hassle-free bit changes, and a fine cutting depth adjustment placing a superior routing experience in the palm of your hand. Purpose-built surface and edge routing vacuum adaptors provide highly efficient dust collection in all situations. Compatible with a wide range of accessories to satisfy all aspects of palm routing, from light edge profiling to more demanding surface routing tasks.Comes as a Bare Unit, NO Battery or Charger.Supplied with: 1 x Parallel Guide, 1 x Collet with Nut 1/4in, 1 x Surface Routing Dust Extraction Adaptor, 1 x Edge Routing Dust Extraction Adaptor, 1 x Chip Shield 1 x Wrench 17mm.Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.Specifications:Collet: 6mm, 1/4in, 8mmNo Load Speed: 10,000 – 30,000/min.Weight: 1.1kg excl. battery
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 182mm
The MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade. Specifically designed for fast cutting a wide range of hard and non-abrasive building products. It’s rapid cool centre and turbo fast cut segment delivers the ultimate cut at a fast speed. Recommended for contractors cutting a wide range of non-abrasive building products. Suitable for cutting; Reinforced Concrete, Clay Roof Tiles, Concrete Slabs, Granite, Ductile Iron, Quarry Tiles, Sandstone, Limestone and most non-abrasive materials.
1 x MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade 350 x 25mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 78mm
MEXCO Diamond Blade Reducing Bush for the reduction of diamond blade bore diameter to fit smaller spindle machines.Note: When fitting bush please ensure it is fitted securely.
1 x MEXCO Diamond Blade Reducing Bush 22.23-16mm
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
1 x MEXCO XCEL Grade Diamond Tile Drill Bit 75mm
MEXCO GPX10 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm
1 x MEXCO GPX10 Concrete Diamond Blade 105 x 16mm
The Bosch Professional ProClick Tool Belt is made from lightweight 1000D polyester. Its padded belt design ensures a high level of comfort. D-rings allow the use of shoulder straps for more flexibility. The application-oriented design of the tool belt enables the attachment of all ProClick Holders and belt pouches. The Bosch Professional ProClick system enables the easy connecting, changing, and adjusting of ProClick belt pouches without removal of the belt.The Bosch Professional 108 ProClick Tool Belt has the following specifications: Belt Size: L/XL.Belt Width:50mm.Adjustment Range: 91-125cm.Material: PS.Weight: 0.46kg.
This Bosch GW S9-115 P Professional Grinder comes with a paddle switch for increased user safety. Power to the machine instantly cuts off when the switch is released. Fitted with a highly efficient 900W motor, this provides a superior cutting and grinding experience. Its robust design and components provide a long lifetime, even under tough working conditions, and heavy workloads. The ergonomic paddle-shape design and slim grip size provide best in-hand control. Specifications: Input Power: 900W.No Load Speed: 11,000/min.Disc Diameter: 115mm.Grinding Spindle Thread: M14.Weight: 1.9kg.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 6mm (1/4in).
Roughneck Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection.Weight: 4530g (10 lb). Handle length 890mm – 915mm (35″ – 36″) depending on head weight.
Jubilee Wingspade® clips are made from zinc protected mild steel and used for fixing flexible rubber hoses etc. They feature a plastic Jubilee Wingspade® fitting instead of the normal 7mm hexagon so that tightening and untightening can be done by hand.Size OOAdjustment 13 - 20mmAdjustment 1/2 - 3/4in
The Roughneck R28M Hardpoint Concrete Saw is made from thick, premium grade steel for rigidity. With large, induction hardened punched teeth. The saw is fitted with a double injected, soft grip handle for comfort and hand protection. The handle is shaped to allow 90° and 45° markings. Suitable for cutting cellular concrete, breeze blocks, bricks, etc. Normal wear and tear of the blade is not covered by the 10 year guarantee. Specification: Length: 700mm (28in)Teeth: 1.2TPI
Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces. Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film. Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information: Coverage: 10m² per Litre. Touch dry: 30 minutes. Hard dry: 7-10 days. Recoatable: 2 hours.Zinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. ZINPWES1L comes in the following: Container type: Tin. Volume: 1 Litre.
The Roughneck ROU34470 Hardpoint Padsaw has triple ground teeth, which are heat-treated for faster cutting and a long-lasting cutting edge. With a bi-material handle for improved comfort. Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, and floorboard. Specification: Blade Length: 150mm (6in)Blade Thickness: 1.5mmTeeth: 7 TPI
PlastiKote Twist & Spray Primer increases top coat adhesion, seals porous, bare or corroded surfaces, maximises durability and improves the overall finish of many surfaces with a formula designed for enhanced and consistent coverage. The new easy spray technology provides added control to make spray painting easier, faster and cleaner than ever before. The primer can be recoated at anytime for simple, faster project completion. The can’s large, comfortable finger pad requires 33% less finger pressure than other spray paint cans, and the twist and lock mechanism means there is no separate top to remove or replace after use. Its cap and button design shields the finger from paint for a cleaner spray-painting process.PKT25003 Twist & Spray Primer has the following specifications: Colour: Grey. Size: 400ml.
Suitable for a multitude of tasks in and around the home and workplace. This 19mm wide tape withstands temperatures from -5°C to 60°C. Flame retardant conforming to BS EN 60454, CE and RoHS. Available in a variety of colours.Colour: Yellow.Width: 19mm.Length: 20m.
Woodworking vice for the professional user who requires a plain screw action.The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism. Fitted with front dog.Jaw Width: 230mm (9in). Jaw opening: 330mm (13in)
The McAlpine TP10 is a plumbing component known as a "trap" that is used to prevent sewer gases from entering a building through a drain. It is designed for use with a washbasin or sink and has a 75mm water seal to prevent the escape of gases.
The TP10 is a tubular swivel all-in-one trap, which means that it combines the trap, waste pipe, and overflow pipe in a single unit. The multifit outlet allows the trap to be connected to various waste pipes. The swivel feature allows the trap to be adjusted to fit different installation requirements.
McAlpine is a UK-based manufacturer of plumbing products that has been in business for over 60 years. Their products are known for their quality and reliability, and the TP10 is no exception. It is made from high-quality materials and is designed to be easy to install and maintain.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Trap outlet can be swiveled in to 'P', 'S' or 'Q' position
Woodworking vice for the professional user who requires a plain screw action.The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism. Fitted with front dog.Jaw Width. 270mm (10 1/2in). Jaw opening: 380mm (15in)
IRWIN Jack universal handsaw offering all round cutting performance, ideally suited for softwoods and board material. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8tpi for ultimate cutting performance. The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety. Suitable for cutting the following timber:-HardwoodSoftwoodRough TimberBoard SheetWorktopFloorboardMelamineLength 500mm (20 in)Teeth 8 tpi
The McAlpine ABSCON-35X1.25 is an ABS solvent weld adaptor designed to convert chrome plated brass compression fittings to plastic solvent weld waste pipes that conform to the BS EN 1329-1:2000 standard. The adaptor is designed to be used with waste pipes and fittings made of ABS (Acrylonitrile Butadiene Styrene) material.
The purpose of this adaptor is to allow for the connection of waste pipes and fittings made of ABS material to chrome plated brass compression fittings. The adaptor is designed to provide a secure and reliable connection between the two different materials, ensuring that the waste system is watertight and free from leaks.
The McAlpine ABSCON-35X1.25 is designed to be used with McAlpine waste fittings and is compatible with a wide range of different pipes and fittings. The ABS solvent weld adaptor is easy to install, and once in place, it provides a durable and long-lasting connection.
Overall, the McAlpine ABSCON-35X1.25 ABS Solvent Weld Adaptor is a high-quality, reliable fitting that is well-suited to a variety of plumbing and waste applications where the connection of ABS waste pipes and fittings to chrome plated brass compression fittings is required.
・ Available in 3 sizes
・ Use with McAlpine Chrome Plated Brass Waste Pipe and Fittings
The McAlpine TSGSTOP Stopper is a versatile accessory for use with several McAlpine Trapped Shower Gully Dip Tubes models, including the TSG1, TSG50, TSG52, and TSG2. The stopper is designed to be used with the dip tube to provide a watertight seal that prevents water from flowing down the waste pipe and into the drainage system.
The TSGSTOP Stopper is made from a durable rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience. The stopper fits snugly into the dip tube, creating a watertight seal that prevents any leakage.
If you have a McAlpine Trapped Shower Gully Dip Tube installed in your plumbing system and need to stop the flow of water, the TSGSTOP Stopper is an excellent option. It is compatible with multiple McAlpine models, making it a versatile accessory to have on hand. Additionally, it is a cost-effective solution that can help prevent costly repairs down the line by ensuring that your plumbing system remains leak-free.
・ When after installation the Gully is not going to be used there is a possibility that the water seal will evaporate. The Stopper when inserted into the Dip Tube will prevent foul air entering the building
・ For use with Trapped Shower Gullies TSG1, TSG50, TSG52 and TSG2 models only, either sheet flooring or tiled floor versions.
The Unifix Form B Washers BS 4320B HV140 Plain - M30 (31.0) are designed for reliable performance in various applications. These washers provide excellent load distribution and are essential for ensuring secure fastening.
High-Quality Material: Made from durable materials for long-lasting use.
Standard Compliance: Meets BS 4320B standards for reliability.
Versatile Application: Suitable for various fastening needs in construction and engineering.
Easy Installation: Designed for quick and efficient installation.
Size Specification: M30 (31.0) ensures compatibility with standard bolts.
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 46mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
The Unifix Form A Washers DIN 125A HV100 Bright Zinc Plated - M2.5 (2.7) are designed for reliable fastening in various applications. Made from high-quality materials, these washers ensure durability and performance.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Standard DIN 125A Design for Versatile Use
Perfect for M2.5 Screws and Bolts
Easy to Install and Use in Various Projects
Ideal for Both DIY and Professional Applications
Quantity: Box of 5000
Heavy-Duty Clear Packaging Duck Tape® is a super strong tape for sealing, wrapping and securing parcels and packages. The tape is crystal clear and can also be used to laminate. Width: 50mmLength: 25m
The Facom Series 440XL Combination Spanner is manufactured from Chrome Vanadium Steel with a long handle for high torque. Optimised open end / handle geometry offers increased accessibility and feature ground contact faces. The 15 degree offset box end allows for a high torque without damaging the nut. The Facom Series 440XL8 Long Combination Wrench 8mm is manufactured from Chrome Vanadium Steel with a long handle for high torque.Optimised open end / handle geometry offers increased accessibility and feature ground contact faces.The 15 degree offset box end allows for a high torque without damaging the nut. Specifications: Size: 8mm.Length: 16.1mm.
Kilrock Foaming Limescale Remover clings to vertical surfaces and rapidly breaks down scale, soap scum and grime. It also kills 99.999% of bacteria to leave surfaces sanitised and odour-free. Ideal for shower surrounds, sinks and tiled areas.
1 x Kilrock Foaming Limescale Remover Yuzu 500ml
The Unifix Class 4 Lock Nuts DIN 439B Bright Zinc Plated - M5 x 0.80 are designed for secure fastening in various applications. These lock nuts provide excellent resistance to loosening under vibration, ensuring reliability in your projects.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Class 4 Strength for Enhanced Durability
Standard M5 x 0.80 Size for Versatile Use
Easy to Install with Standard Tools
Ideal for Mechanical and Structural Applications
The Karcher WV 2 Window Vac effortlessly vacuums up moisture and is a quick and easy way to achieve clean, dry and streak-free surfaces around the home. This lightweight rechargeable handheld vacuum makes removing condensation easy, reducing limescale and mould build up.With the efficiency of a Karcher Window Vac it's possible to clean windows and surfaces up to 3x faster than traditional methods. The powerful lithium-ion battery means the machine can clean for up to 35 minutes or 105m² in just one charge.Supplied with 1 x Battery Charger.Specifications:Working Width: 280mmCleaning Area: approx. Approx. 105m² = 35 windowsBattery Run Time: 35 min.Battery Charge Time: 230 min.Dirty Water Tank: 100mlWeight: 0.6kg
The Carver T186-600 Standard-Duty Bar utilises the same jaws as its rack clamp equivalents. It can be used either for clamping or jacking apart. Size: 60cm (24in).
