The CorePlus HM300 Hard Material Turbo Diamond Blade has the following specification: Diameter: 300mmBore: 22.23mmSegment Height: 10mmSegment Width: 2.8mm
Rentokil Rat Killer Grain Bait is a ready-to-use bait for use in a tamper resistant bait station. Kills in a single feed. Suitable for indoor and outdoor use, in and around buildings. Available in packs of 1 and 3, enough for most infestations. Contains Brodifacoum. Made in the UK.3 x Sachets of Rentokil Rat Killer Grain Bait Kills up to 12 rats.
1 x Faithfull Countryman Wet Cut Bowsaw Blade 755mm (30in).Suitable for use with Faithfull 755mm (30in) bowsaws and most other similar sized bowsaws in the UK market.
The Senco DS522-18V DuraSpin® Auto-Feed Screwdriver is powered by an efficient, variable speed, brushless motor. It has a variable speed selector for heavy steel and a quick-release feed system with our patented corner fit technology. The DS522-18V also features feed on return, so the next screw is aligned with the bit for better line of sight and easier, more accurate screw placement. Comes with a 5-Year Warranty. Supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Li-ion Charger and 2 x 174mm Screwdriver Bits. Specification: Fastener Type: Collated ScrewsFastener Length: 25-55mmScrew Diameter: 3.5-5.5mmRotations per minute: 2,500 rpmTorque: 8NmTool Dimensions (LxWxH): 372 x 86 x 243mmRecharge Time: 100% 45 minutes, 80% 15 minutesWeight: 2.48kg
The HiKOKI VB3616DA Multi Volt Rebar Bender/Cutter allows users to bend and cut in one single unit. Capable of cutting multiple pieces of material in one operation. Bends can be adjusted and fine-tuned with ease thanks to the variable speed switch, and the angle of operation is also simple to adjust with a dial. The brushless motor ensures long working life and reduces the need for excessive maintenance. Its centre roller is also replaceable. Suitable for use by trade professionals and capable DIY enthusiasts. Supplied with: 2 x 18/36V 5.0/2.5Ah Multi Volt Li-ion Batteries, 1 x Charger and 1 x Carry Case. Specification: No Load Speed: 0-16/min.Speed: Cutting 2.6 sec., Bending 3.8 sec.Cutting/Bending Capacity: 10mm/13mm/16mm RebarMultiple Cut Capacity: 10mm: 2, 13mm: 1, 16mm: 1Multiple Bend Capacity: 10mm: 3, 13mm: 2, 16mm: 1Weight: 18.9kg
The Purdy® Painter's Backpack has been designed by pros, for pros. Made from a weather-resistant fabric exterior with rugged metal zippers, it is fitted with rubberised feet that prevent the bag from tipping over, and front straps and buckles provide a secure fit. The design enables even weight distribution for easy carrying to and from jobsites, and it provides an organisational storage system for jobsite painting tools. It features multiple storage spaces for a variety of painting tools, including roller frames up to 18in, brushes, prep tools, extension poles and more, ensuring users have everything they need in one organised location. There is also a removable, no-mess wet brush and roller pouch for transporting used tools away from jobsites.
The Wiha PicoFinish Slotted Fine Screwdrivers come with a round Chrome vanadium steel blade, and is matt chrome plated. Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building. 1 x Wiha PicoFinish Slotted Fine Screwdriver 4.0 x 100mm.
Bosch GSB 18V-55 Professional Combi Drill with brushless motor. The ideal starter tool with a high performance, it easily maximises efficiency on the jobsite. Its robust 13mm Roehm metal chuck delivers an ideal power transfer for the widest range of drilling, impact drilling, and screwdriving applications. The drill driver´s brushless motor ensures an extensive tool lifetime and longer battery runtimes.Electronic Motor Protection prevents overload and ensures a longer tool lifetime. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Chuck Capacity: 13mm.No Load Speed: 0-460/0-1,800/min.Torque (Soft/Hard): 28/55Nm.Torque Settings: 202.Max. Screw Diameter: 10mm.Max. Drilling Diameter: Wood 35mm, Steel 13mm, Masonry 13mm.Weight: 1.0kg excl. battery.This Bosch GSB 18V-55 Professional Combi Drillis supplied with: 2 x 18V 4.0Ah ProCORE18V Li-ion Batteries*.1 x Quick Charger GAL 18V-40 Professional.1 x L-BOXX 136. *ProCORE18V Li-ion Batteries deliver the same performance as standard batteries with an optimised size and weight.
The Senco DS525-18V DuraSpin® Auto-Feed Screwdriver is powered by an efficient, variable speed, brushless motor. It has a variable speed selector for heavy steel and a quick-release feed system with our patented corner fit technology. The DS525-18V also features feed on return, so the next screw is aligned with the bit for better line of sight and easier, more accurate screw placement. This tool is ideal for dry lining jobs. Comes with a 5-Year Warranty. Supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Li-ion Charger and 2 x 174mm Screwdriver Bits. Specification: Fastener Type: Collated ScrewsFastener Length: 25-55mmScrew Diameter: 3.5-5.5mmRotations per minute: 5,000 rpmTorque: 5NmTool Dimensions (LxWxH): 372 x 86 x 241mmRecharge Time: 100% 45 minutes, 80% 15 minutesWeight: 2.48kg
The Makita DBO380 LXT Brushless Finishing Sander is engineered for efficient sanding and fast material removal. Its 3-stage electronic speed control push button and constant speed control enables precise working. Extreme Protection Technology (XPT) has been engineered for improved dust and water resistance for operation in harsh conditions. The ergonomic rubberised grip and handle have been designed for better fit and added comfort. There is a also a detachable front grip, ideal when sanding in tighter spaces. It is now quick and easy to change the abrasive paper, thanks to a tool-less paper clamp. Supplied with a dust bag, but it can be connected to a dust extractor if required. Specifications: Oscillating Speed: 4,000/8,000/12,000/min.Sanding Stroke per Min.: 8,000/16,000/24,000/min.Orbit Diameter: 2.0mm.Pad Size: 93 x 185mm.Paper Size: 93 x 228mm.Weight: 1.9kg. The Makita DBO380Z LXT Brushless Finishing Sander comes as a Bare Unit, NO Battery or Charger. Supplied with: 1 x Punch Plate.1 x Dust Bag.1 x Abrasive Paper.
The Bosch GST 18V-LI B Jigsaw has a variable speed trigger and 4 pendulum stages, allowing you to choose between fast cutting progress or cleaner cuts. Utilises the tool-free Bosch SDS-system, which makes changing saw blades easy. A stoke mechanism stops immediately after the trigger is moved to off-position. For added user safety there is an auto-stop brake. It has a compact, lightweight design with a small grip circumference for optimum control when sawing. Robust aluminium base plate with improved plastic sole for better glide properties and increased control. There is also an LED light and blower for an optimal view of the cutting line. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Strokes at No Load: 0-2,700/min.Stroke Length: 23mm.Mitre Cuts: 0-45 degree.Capacity: Aluminium 20mm, Wood 120mm.
Bosch GKS 12V-26 Professional Circular Saw comes with a compact design for easy handling and convenient sawing in any place. The cordless circular saw can be easily controlled thanks to its small handle circumference and its low weight of only 1.4kg. It also features a LED light, a stamped-steel footplate and a spindle lock as well as a dust port connector. Ideal for sawing thin wood materials like laminate and derived lumber products like OSB, plywood, or MDF. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 12V batteries and chargers (Professional 12V System). Specifications: No Load Speed: 1,400/min.Blade: 85 x 15mm Bore.Max. Cutting Depth: @90 degree: 26.5mm, @45 degree: 17mm.Weight: 1.4kg incl. battery.
The Makita LS003GZ01 XGT 40Vmax Slide Compound Mitre Saw is supplied with: 1 x Dust Bag.1 x Vertical Vice Assembly.1 x Hex Wrench. NO batteries or charger supplied.
The Makita SP001GD202 XGT 40Vmax BL Plunge Saw is supplied with: 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries.1 x DC40RA XGT® Fast Li-ion Charger 240V.1 x Wireless Adaptor.1 x B-57320 Efficut Circular Saw Blade 165 x 20mm x 56T.
Bosch GPL 5 G Professional Point Laser with green laser points providing up to four times better visibility than red points. It features a easy-to-use interface with a two-position switch: when turned on, it automatically self-levels, when turned off, the pendulum is locked. This 5-point laser is transport-ready in no time, thanks to an integrated rotation mount which features strong magnets for fast and secure tool mounting. With its rubberised housing and recessed glass, as well as IP65 dust and water jets protection, the GPL 5 G Professional also resists tough jobsite conditions. Ideal for room partitioning with 90- degree angles and for transferring points from floor to ceiling. It is very suitable for jobs like plumbing and building frames for drywalls. Supplied with: 2 x AA 1.5V LR6 Batteries.1 x Pouch. Specifications: Accuracy: ± 0.35mm/m.Self-levelling Range: ±4 degree.Working Range: 30m.Laser Diode: < 1 mW, 500 - 540 nm.Laser Class:2.Levelling Time:4 Seconds.Power Supply: 2 x AA 1.5V LR6 Batteries (supplied).Operating Temperature: -10-45 degreeC.Storage Temperature:-20-70 degreeC.Dust and Splash Protection: IP65.Tripod Thread: 1/4in.Weight: 0.35kg.
Bosch GBH 12-52 D SDS-Max Professional Rotary Hammer with a robust motor to deliver 3.2 J of impact energy for high-power drilling performance. The rotary hammer also features reverse mode, rotation control clutch, variable speed, and Vario-Lock. For added user protection there is KickBack Control and Vibration Control. This tool is intended for drilling and chiselling in concrete, masonry, wood, and metal. It is compatible with various dust attachments. Supplied with: 1 x Auxiliary Handle, 1 x Depth Stop 210mm, 1 x Machine Cloth, 1 x L-BOXX Inlay and 1 x L-BOXX 136. Specifications: Tool Holder: SDS-Max.Input Power: 1,700W.Impact Rate: 0-4,000/bpm.Impact Energy: 3.2 Joules.Drilling Diameter: Concrete, Hammer Drill Bits 4-28mm, Opt. Appl. Range Concrete, Hammer Drill Bits 8-16mm, Concrete with Core Cutters 68mm, Metal 13mm, Wood 30mm.Weight: 2.9kg.
Bosch GBH 5-40 D SDS-Max Professional Rotary Hammer features robust metal components and an optimised lubrication system for increased durability. Its lightweight and compact design makes it ideal for work in hard-to-reach places. The strong motor enables the delivery of 8.5 J of impact energy for a fast drilling progress and high material removal rate. This tool is intended for drilling up to 40mm in diameter as well as light chiselling work in concrete and stone. It is compatible with various dust attachments. The GBH 5-40 D Professional also features a Rotation Control Clutch and Speed Selection. Supplied with: 1 x Auxiliary Handle, 1 x Grease Tube, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Max.Input Power: 1,100W.Impact Rate: 1,500-2,900/bpm.Impact Energy: 8.5 Joules.Drilling Diameter: Concrete, Hammer Drill Bits 12-40mm, Opt. Appl. Range Concrete, Hammer Drill Bits 18-32mm, Concrete, Breakthrough Drill Bits45-55mm, Concrete with Core Cutters40-90mm.Weight: 6.8kg.
The Karcher K 3 Classic Pressure Washer is suitable for occasional use on light dirt on garden furniture, gardening tools, bicycles and elsewhere around the home. The area performance is 25 m sup2;/h. Despite its compact proportions, the K 3 Classic still delivers the full power of a pressure washer. Plus, its aluminium telescopic handle ensures it can be stowed away to save space and is extremely portable and flexible. Supplied with: 1 x Vario Power Spray Lance.1 x Dirt Blaster Lance.1 x G 120 Q High-pressure Gun.1 x 6m High-Pressure Hose.1 x Garden Hose Adaptor A3/4in. Specifications: Max. Pressure: 120 bar.Flow Rate: 380 L/hr.Max. Water Feed Temperature: 40 deg;C.Hose Length: 6m.Weight: 4.2kg (machine).
The Vileda SuperMocio Soft mop is ready for all kinds of cleaning tasks around the home. With super absorbent material and a lemon shaped head for improved corner cleaning. Machine washable mop head. The mop head is made from 30% more microfibre* for a more efficient clean. (*compared to previous SuperMocio Soft version)e.1 x Vileda SuperMocio Soft Mop Head & Handle
Rustins Teak Oil is based on special vegetable oils and resins to give a quick drying penetrating seal to teak, cedar and all bare wood. Easily applied with a brush or cloth. Gives an attractive sheen on interior and exterior surfaces. Conforms to The Articles in Contact with Food Regulations. Also Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Teak Oil.Size: 5 Litre.
The Bosch GSR 18V-90C Professional Drill Driver with a brushless motor delivers top performance. Its compact head length of 163mm provides perfect tool handiness. The robust 13mm metal chuck ensures great torque transfer for every job. This drill driver has a very high level of tool control for both, increased user health and tool protection. Switchable Kickback Control reduces the risk of sudden rotational torque reaction in a bind-up scenario. There is also a switchable Precision Clutch stopping the overriding once a preset torque level is reached and, thus, reduces the wear and tear of the clutch and the resulting noise. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Chuck Capacity: 13mm.No Load Speed: 0-630/0-2,100/min.Max. Torque (Soft/Hard): 36/64Nm.Torque Settings: 21.Max. Screw Diameter: 12mm.Max. Drilling Diameter: Wood 68mm, Steel 13mm.Length: 163mm.Height: 210mm.Weight: 1.1kg excl. battery.This Bosch GSR 18V-90C Professional Drill Driver comes as a Bare Unit, NO battery or charger in a cardboard box.
Rawlplug Spring toggles are ideal for fixing to cavity walls and ceilings of low structural strength e.g. lathe and plaster. The toggle spreads the load over a wide area for extra security making these ideal for double thickness plasterboard and large fixtures. Easy to use, no special tools needed. Suitable for use in:PlasterboardLathe and plasterPlywoodHardwoodSize. M3 x 50mm.Pack of 20.
The Bosch GWS 18V-7 Angle Grinder is fitted with a durable brushless motor delivering the same power as a 700W corded angle grinder. Optimised design for versatile cutting in all work environments. A lightweight, slim grip design and keyless guard ensure comfortable and safe working. Ideal for all cutting tasks in metal, tiles or bricks. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: No Load Speed: 11,000/min.Disc Diameter: 115mm.Arbor: 22.2mm.Grinding Spindle Thread: M14.Weight: 1.6kg.
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.29.0mm.Key Type.MB. 8mm hexagonal wrench
The Stabila R-Type Levels have been developed for the toughest building site conditions. They are extremely robust, with an innovative 5 chamber aluminium R-profile with torsion rigidity. In addition, the levels have removable and shock-resistant end caps with patented Stabila non-slip stoppers. The levels have an extra wide measuring surface (4cm), making them extremely stable and ensuring that they do not tip over during measuring. Three clearly guided marking edges, along with a web over the horizontal vial, allow marking or cutting over the full profile length. The R-shape of the profile provides a comfortable grip, acting as a finger groove over the full length. This allows perfect handling during measuring and transport. Measurement accuracy:In normal position: 0.029° = 0.5mm/m.Overhead measurement: 0.029° = 0.5mm/m.Stabila R-Type Level. Length: 122cm (48 inch).
Rustins Quick Dry Shed and Fence Clear Protector is a high quality acrylic binder that includes fungicides, preservatives and waxes to give all external timber long lasting protection from rot and mould. Exterior Clear is resistant to ultra violet light and fading. Suitable for fences, sheds, trellis and all garden timber, new or previously treated.Size: 5 Litre.
