ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.5 x 16mm.Box quantity: 200.
Silver Gorilla Tape is extra thick, extra strong and extra durable, which makes it ideal for repairing heating, ventilation or air-conditioning ducts. Suitable for indoor and outdoor use, with superior UV resistance and ability to grip to rough, uneven, unforgiving surfaces such as wood, stone, plaster, brick and more.1 x Gorilla Glue Gorilla Tape Silver 48mm x 32m
Shurtape FrogTape® Multi-Surface is a medium adhesion painter's tape designed for use on cured painted walls, wooden trim, glass and metal. After application it will remove cleanly from most surfaces for up to 21 days (or 7 days in direct sunlight). The only tape with PaintBlock® Technology. FrogTape® is a true innovation - saving you time, money and giving you professional results first and every time. Its super absorbent polymer along the tape's edge attracts the moisture in emulsion paints, creating a micro-barrier. The result is the sharpest lines possible, making touch-ups a thing of the past.This FrogTape® Multi-Surface Masking Tape has the following specification: Length: 41.1mWidth: 36mm Supplied in a box.
The Faithfull Heavy-Duty Conical Connector is made from high carbon, rust-resistant steel. Its pointed end is used to deflect the ball in the grease nipple, thereby permitting the injection of grease. This connector is ideal for damaged nipples with 1/8in BSP connection and will suit most greasing applications.
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 7mm
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm(10in)Cut: hand bastardTanged
The DEWALT Hammer Non Metallic Boots have a brown nubuck upper and anti-bacterial insole with dual density seat region for shock absorption. The boots have a lightweight and flexible design with a steel toecap that offers protection of up to 200 joules. There is also a steel midsole for underfoot protection. The EVA rubber sole is chemical and oil resistant. The sole is also anti-static. EN Test: CE EN ISO 20345-2011.Safety Rating: S1P.Slip Rating: SRA.1 x Pair of DEWALT Hammer Non Metallic Brown Nubuck Boots UK 8 Euro 42
Faithfull Harling trowel with a soft-grip handle. Designed to apply pebbles to mortar when pebble dashing. Pebbles are scooped onto the trowel and then thrown on the mortar. The soft grip handle provides user comfort and control. Size: 165mm² (6.1/2in²).
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.10.0mm.
Scan Foam Latex Coated Gloves are high-visibility orange gloves made of knitted and seamless polyester for excellent comfort. They have black latex wrinkle finish coating on the palm and fingers, which gives excellent grip and flexibility in both wet and dry conditions. The glove has a 13g knitted seamless high visibility polyester liner. Conform to EN420 and EN388 Standards. Abrasion Performance Index (1-4): 2Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 11 x Pair of Scan Hi-Vis Yellow Foam Latex Coated Gloves Size 9 Large
The Facom 'J' extensions have a 3/8 inch drive to fit 3/8 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCMJ210 extension has the following specifications:Length: 125mm.Weight: 127g.
These Scan indirect ventilated goggles are ideal for use with power tools, particularly angle grinders and high-powered drills. With lenses made from tough polycarbonate, these goggles will withstand medium energy, high speed impacts of up to 120m/s (270mph). The lenses are clear and UV resistant. These goggles provide excellent protection from liquid droplets or splashes, large dust particles and molten metals. They can be worn over spectacles and the soft vinyl flanges around the goggles ensure comfort and conformity to facial contour. Conform to EN166:1B (3.4.9).
The DEWALT DEWDT2162QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals and are made from fully hardened high speed steel for increased durability. The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for straight cuts in very thin metal, non-ferrous metal & aluminium from 0.8 - 2mm thick. The DEWALT DEWDT2162QZ has the following specifications:Overall Length: 76mmLength: 50mmTooth Pitch: 0.7mmMax DOC: 2mmEquivalent Bosch Ref: T118GPack Quantity: 5
UNION's basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality. The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike. The latch is made from nylon for a quieter closing action.Finish: Zinc plated.Case size: 65mm (2.5 inch).Backset: 45mm.
These Knipex 38 11 Mechanics Long Nose Pliers with straight, flat-round jaws and a polished head. Made from special tool steel that has been oil hardened to give these pliers a longer working life. ;Fitted with ;PVC dipped handles for added comfort, durability and, most importantly, added grip. The gripping surfaces cross-hatched and knurled. The cutting edges are separately induction hardened for durability and longer working life and are hardened to approx 61HRc. The pliers ;can withstand high load capacity against torsion with high bending strength of the plier jaw/tips to withstand pulling and twisting. They are specially designed for the automotive industry as they have a long reach and will access tight or restricted areas.
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Dimensions:Body: 38 x 44mm.Plastic Shackle: 38mm x 20mm clearance.
The Starrett KFC11021 Deluxe Electrician's Holesaw Kit is suitable for all tradesmen, installation engineers, industry generally and the DIY enthusiast. Starrett kits feature a range of saws with sizes selected specifically to suit the relevant application. Packed in our a EVA carrying case, these kits will be an invaluable addition to any toolbox. Contains: 11 x Holesaws: 16, 20, 22, 25, 29, 35, 44, 51, 64, 68 & 75mm. 2 x Arbors: A1 & A2 Arbors.
145 magnesium hand Floats made from very hard, durable and lightweight magnesium (lighter than traditional trowels). The comfortable wooden handle is positioned to give perfect balance and is secured with screws that will not back out. Magnesium floats produce a smoother finish than wood. Size: 400 x 80mm (16 x 3.1/8in).
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 5.5mm.Total length: 95mm.Working Length: 55mm.
The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.Size: 76mm (3 in) Finish: Polished Brass Finish Pack: 1
The Faithfull saw is designed specifically for cutting dry wall panels and plasterboard. The sharp pointed tip is used to jab into the material and start the cutting process. A sturdy sheath protects the blade when not in use. Specification: Blade Length: 150mm (6in)TPI: 7
Scan Max. Dexterity Nitrile Gloves have a micro thin nitrile foam coating and 18 gauge ultra thin nylon liner. This allows these gloves to have maximum dexterity and feel, making them ideal for precision work and light-duty handling. They have excellent breathability and superb comfort qualities. Ideal for use in petrochemical, painting, printing, agriculture and auto machinery maintenance industries. Conform to EN 420 and EN 388 Standards. Abrasion Performance Index (1-4): 3Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 2Puncture Performance Index (1-4): 11 x Pair of Scan Max. Dexterity Nitrile Gloves - Large (Size 9)
These SCAN FPP1 Premier Valved Disposable Masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself and the valve makes breathing easier. They are ideal for use with:- Brick dust- Concrete and plaster- Hand sanding- Loft insulation With an FPP1 protection level, these masks are suitable for protecting against particles bigger than 5 microns, such as dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below. The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift. The masks conforms to EN 149:2001+A1:2009 Disposable Mask Protection Levels: FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists FFP2: Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists FFP3: Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mistsEN149 Filtering Face Piece for Particulates.These SCAPPEP1MVB Moulded Valved Disposable Masks are supplied in a box of 10.
Polycell Multi Purpose Polyfilla mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler, which is suitable for a variety of jobs, even large areas. Very easy to use. Tools required: filling knife, mixing bowl and sand paper. Drying time: 1-2 hours. Suitable for interior use only.450g. Single. Powder.
The Faithfull planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. The 60.1/2 block plane with a 35mm cutter width, set at a low angle of 13 1/2º making it particularly effective on end grain and plastic laminates. The 9.1/2 block plane with a 42mm cutter width, set at an angle of 21º. Ideal for end grain and general purpose finishing. The Faithfull FAIPLANEBPS 60.1/2 and 9.1/2 block plane set is presented in a hinged wooden box.
Polycell Multi Purpose Polyfilla is ready mixed for a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. Suitable for indoor or outdoor use on plaster, masonry, concrete and brickwork. Drying time: surface dry in 1-2 hours.Size: 300g tube + 20% free.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 35mm
This Faithfull Saw Blade has a broad range of applications with side set, hardened teeth, for fine straight cutting in soft wood, plastics, plasterboard, plastic pipes and similar materials. Compatible with many multi-function oscillating power tools.Multi-Functional Tool Flush Wood Blade Side Set Pack of 5 Width: 68mm.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads are made from A2 stainless steel. They are ideal for use in and with many materials. APPLICATIONIdeal for use in sanitary locations and in marine environments. Stainless Steel does not corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Stainless steel is used where both the properties of steel and resistance to corrosion are required. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST Stainless Steel 4.0 x 30mm Box 200
The Faithfull Die Holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder-coated, with each end knurled for a comfortable non-slip grip.Size: 38mm (1 1/2 in)
MXS Gold Finishing Trowels have a stainless steel blade tempered to a golden finish, made from the highest grade hardened and tempered bright stainless steel blade, which is properly shaped. The aluminum alloy Xtralite mounting is lightweight but very strong and has a resilient DuraSoft® handle which provides a soft feel, reduces fatigue, and offers excellent durability.Size 400 x 125mm (16 x 5 in)
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 5.0 x 75mm Box 100
Forgefix Netting Staples are versatile staples with extra sharp points, ensuring quick insertion. They are galvanised for increased durability, as the staples are predominantly used on external applications. APPLICATION:For fastening all manner of wire and netting.Used extensively in the fencing trades. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Netting Staple Galvanised 40mm Bag Weight 500g
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 140mm Diameter: 10mm Flute Length: 83mm
These Forgefix Phillips, twin fine thread Drywall Screws have a zinc plated finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining eithout the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures.Drywall Screw Phillips Bugle Head TFT ZP 3.5 x 38mm Bulk 1000
