The McAlpine CAP100 is a temporary blanking off cap that is designed for use with 110mm diameter soil pipes. It is used to temporarily seal off a soil pipe during construction or maintenance work.
The CAP100 is made from durable and long-lasting materials, ensuring that it can withstand the rigors of use on construction sites. It is also designed to be easy to install, with a simple push-fit mechanism that allows it to be securely attached to the end of a soil pipe without the need for additional tools or fittings.
Once installed, the McAlpine CAP100 provides a reliable and effective seal, preventing any unwanted materials or debris from entering the soil pipe during construction or maintenance work. This helps to ensure that the soil pipe remains clean and free-flowing, reducing the risk of blockages or other issues that can cause problems in the future.
Overall, the McAlpine CAP100 is a high-quality and reliable temporary blanking off cap that is an essential tool for anyone working with soil pipes on construction or maintenance projects.
・ For temporarily sealing 4"/110mm pipe
・ Manufactured in synthetic rubber
The McAlpine STW7-RB is a 19mm water seal shower trap with a universal outlet. It is similar to the STW7-M, but features a removable bottom section for easy cleaning and maintenance.
The STW7-RB is made from high-quality materials and is designed to be durable and long-lasting. It features a 19mm water seal to prevent water from flowing back into the shower and helps prevent any unwanted odors from entering the bathroom.
The universal outlet design of the trap allows it to be easily connected to a variety of different waste pipe sizes and configurations, making it a versatile option for any shower installation. The removable bottom section allows for easy access and cleaning, ensuring that the trap remains effective and free from blockages.
Overall, the McAlpine STW7-RB 19mm Water Seal Shower Trap with Universal Outlet is an excellent choice for anyone looking for a reliable and easy-to-maintain shower trap solution. Its removable bottom section makes it particularly well-suited for installations where access is limited or regular cleaning is required.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified
Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.
If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 10Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
The McAlpine X10 75mm Water Seal Straight Through Trap with 1¼" Multifit Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a variety of different appliances, such as sinks, baths, and showers.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" multifit outlet, which allows for easy installation with a range of different waste pipe materials.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine X10 75mm Water Seal Straight Through Trap, simply attach the trap to the waste outlet of the appliance using the 1¼" multifit outlet. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine X10 75mm Water Seal Straight Through Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 1¼" Inlet and Outlet
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Includes Cleaning Eye
・ Inlet and outlet connections are directly in-line allowing for neat plumbing behind basin pedestals
The McAlpine FPKIT-3 WC Frame Connector Kit is a set of components designed to connect a toilet bowl (WC) to a drainage system. The kit includes the following parts:
WC Connector with 90mm plain end: This is a plastic pipe that connects to the bottom of the toilet bowl and allows waste to pass through to the drainage system.
110mm outlet seal: This is a rubber gasket that fits onto the end of the WC Connector and provides a tight seal to prevent leaks.
Flush pipe with finned seal connector: This is a plastic pipe that connects the WC Connector to the drainage system. It has a finned seal connector that fits tightly into the drainage pipe.
Fixing bolts and caps: These are the screws and caps that are used to attach the WC Connector and flush pipe to the toilet bowl and the drainage system.
Overall, the McAlpine FPKIT-3 WC Frame Connector Kit provides all the necessary components for a secure and leak-free connection between a toilet bowl and a drainage system.
・ Suitable for in-wall WC frames
The McAlpine STW85CPB is a standard waste designed to be used with McAlpine STW 1½" shower traps. The waste is made from high-quality materials and is designed to be durable and long-lasting.
The STW85CPB waste is designed to be used with a range of plumbing systems and is easy to install. It features a standard 1½" outlet size and can be connected to a variety of different waste pipe configurations.
The waste is an essential component of any shower installation, helping to ensure that water drains effectively and prevents any blockages or unpleasant odors from entering the bathroom.
Overall, the McAlpine STW85CPB Standard Waste for STW 1½" Shower Traps is an excellent choice for anyone looking for a reliable and durable waste solution for their shower. Its compatibility with a range of plumbing systems and easy installation make it a popular choice among plumbers and homeowners alike.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
For daily cleaning and care of taps and whirlpool jets. Gently removes limescale and deposits from taps without risking damage to sensitive components such as valves and cartridges, or to surrounding enamel or ceramic surfaces. Creates a beading effect to repel dirt
The McAlpine WC-CON5B is a rigid WC (water closet) connector designed to join a toilet pan to a soil pipe with an inlet diameter of 97-107mm. The connector has a 20mm offset to allow for flexibility in positioning the toilet relative to the soil pipe.
One of the key features of the McAlpine WC-CON5B is its adjustable length, which can be extended or shortened to fit the distance between the toilet pan and soil pipe. This makes it a versatile and practical choice for a range of installation scenarios.
Overall, the McAlpine WC-CON5B is a high-quality and reliable connector that can help ensure a secure and leak-free connection between your toilet and the waste pipe.
・ Available with finned outlets for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is a plumbing fitting designed to connect a 1.1/4 inch solvent weld pipe to a push fit pipe. The "S18-Abs" in the description refers to the specific model of the adaptor, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The adaptor is designed with a straight configuration, meaning that it forms a straight connection between the two pipes. The solvent weld end of the adaptor is designed to fit inside a 1.1/4 inch solvent weld pipe, while the push fit end of the adaptor is designed to fit onto a push fit pipe.
The push fit end of the adaptor is made with ABS, which is a type of plastic commonly used in plumbing applications due to its durability and resistance to chemical corrosion. The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is designed to provide a secure, leak-free connection between solvent weld and push fit pipes, making it a useful fitting for a variety of plumbing applications.
・ Available in 1¼" and 1½" sizes
The McAlpine C10AV is a bottle trap designed for use with washbasins or sinks. It features a 75mm water seal and an adjustable inlet that allows it to be easily fitted to a variety of waste pipe sizes. The trap also includes a multifit outlet, making it compatible with a wide range of plumbing systems.
What sets the McAlpine C10AV apart is its anti-siphon or "silentrap" function. This means that the trap is designed to prevent the loss of the water seal and the ingress of foul air, even in the event of negative pressure or vacuum in the drainage system. This is particularly important in buildings with high-rise plumbing systems, as negative pressure can cause water to be sucked out of the trap, breaking the water seal and allowing unpleasant odours and gases to enter the building. The anti-siphon function of the McAlpine C10AV ensures that the water seal remains intact, preventing the ingress of foul air and maintaining the integrity of the plumbing system.
The McAlpine C10AV is a high-quality bottle trap that is easy to install and offers reliable performance. Its adjustable inlet and multifit outlet make it a versatile choice for a range of plumbing applications. The anti-siphon function ensures that the trap continues to function correctly, even in buildings with high-rise plumbing systems, making it an ideal choice for commercial or residential properties where maintaining the integrity of the plumbing system is critical.
・ Available in 1¼" and 1½" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
The McAlpine TSG1SS-SL-NSC is a trapped gully designed for use in drainage systems. It features a 75mm water seal, a clamp ring and a cover plate, a 2" horizontal outlet, and a 2" x 1½" socket reducer. The gully is made of stainless steel, which provides durability and resistance to corrosion.
The McAlpine TSG1SS-SL-NSC trapped gully is designed to prevent foul odors and gases from escaping into the atmosphere through the drainage system. It is suitable for use in both domestic and commercial plumbing systems.
The clamp ring and cover plate of the gully make it easy to install and maintain. The 2" horizontal outlet and 2" x 1½" socket reducer provide compatibility with a wide range of plumbing systems.
Overall, the McAlpine TSG1SS-SL-NSC trapped gully is a reliable and essential component in any plumbing installation.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine ST90CPB-S-53 is a slimline shower trap designed for use with 90mm shower wastes. It has a water seal of 50mm and features a 1½" solvent weld outlet. The trap is designed to prevent foul smells from entering your bathroom by trapping water inside the trap, which creates a seal that prevents gases from passing through.
The trap is made from high-quality materials and is built to last. It is easy to install and can be used with a range of different shower trays and waste pipes. The slimline design means that it can be installed in tight spaces and will not take up too much room under the shower tray.
Overall, the McAlpine ST90CPB-S-53 is a reliable and effective shower trap that is well-suited to a range of different bathroom installations. If you are looking for a high-quality shower trap that will provide reliable performance and help to keep your bathroom smelling fresh, this could be a good option to consider.
・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ Overall height is only 53mm
・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray
・ 25mm Water Seal
Main Product Description:
The FloPlast Niagara External Right Hand Stopend Black is a high-quality, durable fixture designed to cap off the right-hand open ends of Niagara gutter lengths. Made from uPVC material, it forms part of the Niagara Ogee guttering system and is suitable for various applications such as new builds, refurbishments, conservatories, and extensions in areas with heavy rainfall. It offers easy installation, good flow capacity, and comes with a 10-year performance and colour guarantee.
Features:
- Ornate (K-style) profile
- Clip system for fast and easy installation
- Designed for right-hand ends only
- Compatible with FloPlast 65mm square or 68/80mm round downpipe systems
- Manufactured to BS EN 607 standards
- Kitemarked under KM501316
Benefits:
- Traditional ogee style profile
- High capacity PVC-U domestic rainwater system
- Revolutionary moulded water-tight seal and retaining clip pre-fitted for user-friendly installation
- Suitable for all properties, old and new
- Outlet connects to square or round downpipes
- Available in various colours: black, white, brown, caramel, and FloPlast Cast Iron Effect guttering
- Fast delivery options available
The McAlpine 11/2" Backnut Washer Pww2 is a plumbing component that is used to create a watertight seal between the backnut and the waste pipe in a plumbing system. Here are some of its features:
Size: The backnut washer has a diameter of 1.5 inches (11/2") and is designed to fit backnuts with a matching diameter.
Material: The washer is made of high-quality rubber material that is durable and resistant to wear and tear.
Watertight seal: The main function of the backnut washer is to create a watertight seal between the backnut and the waste pipe. This prevents water leaks and ensures that the plumbing system is working efficiently.
Easy to install: The backnut washer is easy to install and can be used in both residential and commercial plumbing systems.
Overall, the McAlpine 11/2" Backnut Washer Pww2 is a reliable and efficient plumbing component that is designed to create a watertight seal between the backnut and the waste pipe. It is made of high-quality rubber material and is easy to install, making it a popular choice for plumbers and DIY enthusiasts alike.
JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK.
Provides a firmer grip on the collet demounting pipe
For use with Speedfit fittings
The McAlpine T23L is a blank cap fitting that is designed to seal off the end of a 1 1/2-inch pipe or fitting in the Surefit range of plumbing fittings and pipes made by McAlpine.
The T23L blank cap features a push-fit connection on one end, which allows for quick and easy installation. The cap is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when fitted onto the end of a pipe or fitting.
The T23L blank cap is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T23L blank cap is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T23L blank cap can be used to temporarily seal off a pipe or fitting during maintenance or repair work, or as a permanent seal for pipes or fittings that are no longer in use.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
Plugs an unused port on a John Guest push-fit fitting
John Guest push-fit acetal plug is for plugging unused connection ports on a John Guest fitting. All John Guest fittings are manufactured and assembled in the UK.
Pack of 5
Consort 2kW Plinth Heater PHSL2BL
_Fan only setting for air circulation in warm weather
_Compatible with advanced single zone controllers and run-back time controllers
_LED indicator light with automatic safety cut-out and fitted 2.2m of supply cable
_Minimum kick space height of only 100mm
_With a 1 year guarantee
Airvent 459309A 100MM 4'' Bathroom Extractor Fan With Timer And Automatic Shutters
_Automatic slow opening / closing backdraught shutter built in
_24 litres per second, 88 cubic metres per hour extraction rate
_20W power consumption
_Sound output 32dB(A) @ 3m
_Dimensions: 156mm wide x 156mm high x 42mm deep. 99mm diameter spigot, extends for 53mm
The Red Gorilla Premium Bucket is an extra strong, 3 gallon bucket with thick, ribbed walls. Great for plastering, mixing, plumbing, carrying water and tools. Available in black, yellow, red and blue.1 x Red Gorilla Premium Bucket 3 Gallon (14L) - Red
These Scan Heavy-duty Trade Wipes are suitable for cleaning surfaces, hands, tools and machinery. Wipes are antibacterial to BS EN 1276 with added natural Aloe Vera oils to help keep skin moisturised. With an advanced chemical formula and textured finish these industrial wipes make light work of removing silicones, paints, sealants, adhesive, oils, greases and many more materials found in day-to-day trade use. Each recyclable tub contains 100 x XL (20cm x 30cm) Scan Trade Wipes.
Geocel THE WORKS PRO Multi-use Cleaner is an all purpose spray which works in seconds. It removes uncured sealant, adhesive, grease, oil, tar and much more. Ideal for cleaning all surfaces before using the WORKS or painting. It can also be used for cleaning and degreasing surfaces and tools.
The Original and best, Brummer Wood Filler is ideal for repairing furniture, doors, skirting boards and wooden floors, as well as picture frames and mouldings. Highly versatile, it can be used outside if varnished or painted over and mixed with other Brummer wood filler colours. It can be drilled and sanded just like wood itself, or stained with a proprietary stain to achieve any desired shade. Heat proof (up to 90 degreeC), works equally well on most metals and can be used under nearly all types of decorative finish including polish, lacquer, varnish and paint. Available in small (250g) and medium (700g) sizes, in a range of popular wood shades to complement the finishes used to enhance the beauty of natural wood.
The Original and best, Brummer Wood Filler is ideal for repairing furniture, doors, skirting boards and wooden floors, as well as picture frames and mouldings. Highly versatile, it can be used outside if varnished or painted over and mixed with other Brummer wood filler colours. It can be drilled and sanded just like wood itself, or stained with a proprietary stain to achieve any desired shade. Heat proof (up to 90 degreeC), works equally well on most metals and can be used under nearly all types of decorative finish including polish, lacquer, varnish and paint. Available in small (250g) and medium (700g) sizes, in a range of popular wood shades to complement the finishes used to enhance the beauty of natural wood.
The Faithfull Essentials 3 Prong Cultivator has a head manufactured from heat-treated (hardened) carbon steel to provide both strength and durability. The polypropylene and powder-coated finish provide improved resistance to rust, scratches, humidity and alkalis in the soil. The handle is manufactured from tubular steel with a hard-wearing polypropylene coating, making it comfortable to use. Ideal for loosening compacted surface soil around shrubs and plants. Also for cultivating soil to kill weed growth. The 3 narrow pointed tines on the cultivator head, allow it to easily cut through soil, breaking it up and reducing weed growth. It is also useful for clearing leaves and other debris from beds and between plants. Overall Length: 1420mm
Faithfull flexible latex impregnated waterproof backing paper coated with an aluminium oxide abrasive. Used wet or dry for sanding paint, primer and body filler. Coarser grades are ideal for removing major imperfections, finer grades are ideal for final painting. Super fine grades allow exceptionally fine finished to be achieved, especially when used wet. These sheets can be cut to any size, making them very versatile for use in assorted applications. C-weight paper on grades C60-C180.A-weight paper on grades A240-A1200.Specifications: Pack quantity: 4. Size 280 mm x 230 mm. Grade: Medium.
Faithfull flexible latex impregnated waterproof backing paper coated with an aluminium oxide abrasive. Used wet or dry for sanding paint, primer and body filler. Coarser grades are ideal for removing major imperfections, finer grades are ideal for final painting. Super fine grades allow exceptionally fine finished to be achieved, especially when used wet. These sheets can be cut to any size, making them very versatile for use in assorted applications. C-weight paper on grades C60-C180.A-weight paper on grades A240-A1200.Specifications: Pack quantity: 4. Size 280 mm x 230 mm.Grade: Coarse.
Liberon Steel Wool is produced using a high quality Super Fine steel to create crumble and dust resistant wool that is virtually oil free. Performance- Ideal for cleaning, preparing and maintaining wood and metal finishes. - Ideal for applying wax polishes. - Crumble resistant and virtually oil free. - Flexible abrasive. - Ideal for use with paint strippers. - Approved by the Guild of Master Craftsmen. Product application Steel Wool is available in 7 grades from Ultra Fine 0000 through a range of Fine to Medium 00, 0, 1 and Medium to Coarse 2, 3 and 4. Polishing and cleaning delicate surfaces Grade 0000 - use to cut back between coats of French polishes, varnishes and oil finishes. - use to clean and polish metals such as bronze, copper, chrome, stainless steel and aluminium. - use to cut back between coats of varnish or paint. - use with soapy water to clean and polish porcelain, marble and glass without marking. Light cleaning and surface preparation Grade 00, 0, 1 - use with Liberon Wax and Polish Remover to remove built-up wax polish, smoke and dirt on wood. - use to clean, smooth and prepare wood or metal surfaces before re-polishing, waxing, varnishing or painting. - use with a suitable solvent for light to medium cleaning of all metals. Heavy cleaning and paint and varnish removal Grade 2, 3, 4 - Use with Liberon Fine Wood Stripper to remove softened French Polishes, varnishes, lacquers and paints from wood and metal surfaces. - use to remove rust. If in doubt use a finer grade of Liberon Steel Wool.LIBSW21KG Steel wool has the following specifications:Grade: 2Pack weight: 1kg.
Faithfull Industrial quality steel wool for surface preparation, finishing, cleaning, preparing and maintaining wood and metal finishes. Ideal for applying wax polishes and for use with paint strippers.Grade: Very Fine.Weight: 200g.
Faithfull Industrial quality steel wool for surface preparation, finishing, cleaning, preparing and maintaining wood and metal finishes. Ideal for applying wax polishes and for use with paint strippers.Grade: Coarse.Weight: 200g.
The Rentokil Pest Control Hand & Surface Wipes are ready-to-use hygienic wipes for cleaning hands after handling pest related products or dead rodents/insects. Ideal when using or handling poisons or animal traps. Can also be used on surfaces, bait trays and traps in the home and garden. The special antibacterial formulation is suitable for all pest control situations. Made in the UK.
Non-woven hand pads for general sanding and preparation applications. Ideal for contoured or shaped surfaces. Made in Great Britain.-for general cleaning and removal of light oxide and debris contamination, Grade . General purposeSize 150 mm x 223 mmColour Greenpack 10
Flexovit emery cloth sanding sheets have an incredibly strong cloth backing for increased product strength and durability. Can be torn into strips for detailed work and is suitable for hand or power tool use. Ideal for removing rust, paint and scale from metal surfaces. The fine grits are also ideal for preparing and polishing metal. Size: 230 x 280mm.Grit: Assorted.Pack quantity: 3.
