The Stanley Tylon™ Pocket Tape has a corrosion resistant, long-life Tylon™ coated blade with positive blade lock for accurate measurements. Shows both metric and imperial graduations. Fitted with a Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction for improved strength and durability. The impact resistant ABS plastic case is fitted with an ergonomic overmould for all day comfort.This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Loose. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The DEWALT DT2290 HCS Wood Jigsaw Blades Variety Pack contains a selection of the most popular blades for general woodcutting. Supplied in a handy storage case with a clear lid for easy identification. Contains the following: 2 x HCS 105-1 Blades for smooth cuts in wood, up to 30mm. Length: Overall: 100mm, Working: 75mm.Tooth Pitch: 2.5mm. 2 x HCS 101-2 Blades for rough cuts in wood, up to 60mm. Length: Overall: 100mm, Working: 75mm.Tooth Pitch: 3mm. 1 x HCS 130-1 Blades for smooth curved cuts in wood, up to 15mm. Length: Overall: 75mm, Working: 50mm.Tooth Pitch: 2mm. 2 x HCS 116-01 Blades for fast cuts in wood, up to 60mm. Length: Overall: 100mm, Working: 75mm.Tooth Pitch: 4mm. 1 x HCS 127-01 Blades for smooth curved cuts in wood, up to 30mm. Length: Overall: 100mm, Working: 75mm.Tooth Pitch: 1.4mm. 2 x HCS 116-2 Blades for fast cuts in wood, up to 50mm. Length: Overall: 100mm, Working: 75mm.Tooth Pitch: 4mm.
The Faithfull Multi-Function Gasket & Pipe Mitre Shears are designed to cut cleanly and precisely through plastic and rubber. They can be used for cutting rubber gasket, plastic conduit and trunking, window and door seals, decorative trim strips and tile sealing strips. The kit contains a pair of shears with a stainless steel blade and 5 interchangeable aluminium lower jaws. The chrome-plated steel body is fitted with comfortable PVC handle grips and a safety lock. Supplied in a robust plastic storage case with the following jaws: 1 x 17mm & 20mm Pipe Cutter Head for cutting plastic conduit. 1 x 27mm Pipe Cutter Head for cutting plastic conduit. 1 x Triangular Head for cutting square conduit and sealing strips. 1 x Slotted Head for general cutting of rubber and plastic gaskets. Max. Cutting Width: 50mm. 1 x Angle Mitre Head for cutting accurate mitres. Marked with 45°, 60°, 75°, 90°, 105°, 120° angles and graduated to 50mm and 2in.
This DEWALT FLEX Stainless Steel Flat Trowel has the following specification: Blade Size: 14 x 4inBlade Thickness: 0.5mm The DEWALT FLEX Stainless Steel Flat Trowel is lightweight but also offers the sturdy construction that professionals demand. Made from triple-hardened, premium stainless steel with precision-ground, pre-broke edges and corners; ready for immediate use. It has a high-strength but lightweight aluminium handle mount and super-strong, surface-mounted rivets that last longer than through-rivet designs or taped designs. The handle has been over-moulded with proprietary brushed leather injected composite, meaning the handle will custom form to the user's hand under regular use for maximum comfort. It will provide years of reliable, all-day use on the job site.
The EdgePoint GP7115 General-Purpose Diamond Blade has the following specification: Diameter: 115mmBore: 22.23mmSegment Height: 7mmSegment Width: 2.3mm
These Stanley Iowa Holster Trousers have the following specification: Colour: Black Waist: 42in Leg: 31in These Stanley Iowa Holster Trousers have a 'classic' fit. Durable Cordura® knee pad pockets allow you to add knee pads, increasing comfort when working on your knees. They have multiple cargo pockets making them good, all-round, functional work trousers. There is also a handy ruler pocket.
Trend C056A TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. 9.5mm radius, 12.7mm cut depth for classic decorative mouldings and edge details. 1/2in shank ideal for heavy-duty applications and router table use, with a 'K' marked shank to ensure safe working practices. PTFE coating to minimise heat and resin build-up for increased cutter performance and longevity. Specification: Radius: 9.5mmCutting Depth: 12.7mmShank: 1/2in
This Stanley rule is made from high quality hardwood and has brass joints and tips. Measures in metric only, with millimetre, centimetre and metre graduations. Total length: 2 metres Folds into 10 lengths, for easy storage and transportation.
The Lessmann End Brush with Shank has the following specification: Wire Type: SteelDiameter: 12mmWire Height: 120mmWire Gauge: 0.30Max Speed: 15,000/rpm
ForgeFix Don Quichotte Mickey Pins have been specifically designed for percussion (hammer) installation. The fitted washer prevents fixtures pulling over the head of the nail. They have a zinc galvanised finish for increased durability. Used for fastening trunking, cabling, steel channelling, plastic sheeting, cable trays and timber form work in masonry applications.
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502738 Auger drill bit has the following dimensions:Drillbit diameter: 5.0mmTotal length: 150mmWorking Length: 73mm
A robust work bench vice ideal for the home handyman and professional woodworker. The vice has a 175mm 7in width jaw with a clamping capacity of up to 185mm (7.1/4in).Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The mainscrews Acme thread provides a rapid jaw action and features a toe in function to ensure an even pressure is applied when a work piece is clamped. Wooden jaws may also be fitted to protect the work piece and the vice.The vice is finished in an attractive Blue enamel coating with a chrome plated mainscrew and handle to provide better corrosion resistance, Jaw width: 175mm (7in)Clamping capacity: 185mm (7.1/4in)Throat depth: 65mm (2.1/2in)Tommy bar length: 150mm (6in)Weight: 3.157Kg (7lbs)
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 8 mm Length 75 mm
The BlueSpot Tools Torpedo and Mini Level with a plastic body, aluminium frame and magnetic base. With V-groove for pipework. Supplied with a mini line level with a magnetic base. Torpedo Level Length: 22.5cm.
Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has the dimensions etched on the extra long 40 mm shanks, for quick identification. Dimensions:Shank: 1/4in.Cutting Diameter (D): 12.7mmCutting Length (C): 25.4mm
The Forgefast Wafer Head Torx® Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.Forgefast Wafer Head Torx® Compatible Construction T40 Screws Size: 8 x 340mm.Pack Size: Tub of 20.Finish: Tan elementech 2000.
Everbuild PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates.It has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive. BENEFITS - Greatly improved adhesion to a wide range of substrates including dense concrete, glass, steel, tiles etc.- Mixes may be applied in much thinner sections to salt permeation- Reduces surface dusting of concrete- Improved flexibility of sand cement products- Reduced water:cement ratio for equivalent workability- Improved frost resistance- Reduces surface porosity of mortar/plaster AREAS FOR USE- As with general purpose adhesive for wood, cork, paper, textiles etc- As an admixture for mortar/screeds/renders- As a bonding agent for screeds/renders to difficult substrates- As a primer/sealer in tiling applications- As an internal filler when mixed with wood shavings, plaster etc.Size: 500ml.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.The Melco TIM2 ISO Metric Box Spanner is made with 3mm steel and has the following specification: Size: 5 x 5.5mm.Length: 100mm (4in).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 3.Diameter: 44mm (1 3/4in).Weight: 1550g (3 1/4lb).
This Scan face shield and visor is a good all-round lightweight brow guard with a polycarbonate face shield that offers unrestricted working vision and protection against medium energy flying particles and liquid splashes. It has an adjustable head harness to ensure comfortable fit over most head sizes. Its 'Flip-up' visor mechanism allows full adjustment of the visor Conforms to EN166:1B(3) Size: Universal
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 2.Diameter: 38mm (1 1/2in).Weight: 960g (2lb).
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 8.0mm.Total length: 300mm.Working length: 240mm.
Faithfull TCT Cordless Trimsaw Blade with Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance and laser cut expansion slots to reduce heat build-up. Specially designed for use with hand-held cordless saws. This range includes blades for fast cutting and fine finishing on all types of timber and man-made boards.This Faithfull TCT Cordless Trimsaw Blade has the folowing specification: Application: Fast Rip.Blade Diameter: 136mm.Bore: 10mm.Teeth: 24.Rake: POS.
Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head. They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Self-Drilling Stitching Hex Screws have the following specification: Size: 6.3 x 25mmClamping Thickness: 8mmHead Type: 8mm HexPack Size: 100
Scan Thermal Latex Coated Gloves have a high visibility design with black latex wrinkle finish coating to palm and fingers. They give excellent grip in both wet and dry conditions. Ideal for the construction, automotive and handling industries. With palm and finger coated latex and high-visibility seamless acrylic knitted thermal liner. Conform to EN388 and EN420 Standards. Abrasion Performance Index (1-4): 3Blade Cut Performance Index (1-5): 1Tear Performance Index (1-4): 3Puncture Performance Index (1-4): 25 x Pairs of Scan Thermal Latex Coated Gloves Size 8 Medium
The Dormer P801 Solid Carbide Rotary Burrs have cylinders without endcuts and produce double cuts. The first choice for general machining, improves ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reducing vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Rotary Burr - Cylinder Without Endcut has the following specification: Diameter: 16mm.Shank Diameter: 6mm.Working Length: 25mm.Overall Length: 70mm.
Need to make strong repairs to plaster, stone, concrete or wood? Ronseal Multi-Purpose Powder Smooth Finish Filler is the ultimate, high performance filler. This filler gives excellent adhesion, fills gaps up to 40mm deep. A blend of superfine chalk and white plaster with added powdered polymer. Areas of use: Walls and ceilings.Application: Filling Knife.Drying time: 1-2 hour.Protection level: High.Can be drilled once dried hard.Comes in air tight bag.Easy to mix.Buttery texture when mixed.Extremely easy to sand. Various sizes available.The Ronseal RSLMPLF500VP is supplied in a 500g + 50% Extra Box
The BlueSpot 3/8in Drive 72 Tooth Soft Grip Ratchet is manufactured from chrome vanadium for increased durability. It features a soft grip handle for increased comfort. The 72 teeth provide 5° ratcheting increments making it ideal for use in tight spaces.
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS16210 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 16mmWorking Length: 150mmOverall Length: 210mm
Irwin Speed Hammer pointed chisels are for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The Irwin IRW10502185 Speedhammer Max pointed chisel 400mm.
