Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Kit 3/8 BSF 20tpi
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: MOO.Adjustment: 11 - 16mm.
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M3Thread: 0.5
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M10Thread: 1.5
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.
The DEWALT Multi-Tool Carbide Rasp has an extremely abrasive sanding surface for smoothing very hard and uneven surfaces. It has a 'Tough Grit' carbide edge for fast and effective removal of adhesives, lacquers and sealants. The blade is quick and easy to change and fits all common oscillating tools. It is ideal for the removal of hard tile adhesives.
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Kit 20mm x 2.5Length 1 1/2D
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.Selection pack containing: 700 x 6mm.1000 x 8mm.1000 x 10mm.1000 x 12mm.700 x 14mm.
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 3 x 12 Box 100
Ronseal 10 Year Woodstain offers the best protection against the weather, leaving your wood looking great for 10 years. You don't need to use any base coats or primers. It won't flake or peel. BBA approved.Suitable for all smooth planed exterior wood. Not suitable for decking. Specification: Drying Time: 1 hourCoverage: 18m²/LThis Ronseal 10 Year Woodstain has the following specification: Colour: Antique PineSize: 750mlDrying Time: 1 hourCoverage: 18m²/L
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 12mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. It is water-based and harmless to plants and pets.Colour: Fresh Rosemary.Size: 2.5 Litre.
Imperial 13in lengths of high carbon bright steel, precision ground to very close tolerances; Above 1 in + - 0.0005in.Below 1 in + - 0.00025in. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 7/8 in
Rapid No. 28 precision cut, high performance steel flat wire cable staples with rounded crown are designed for securing low voltage cables up to a maximum of 4.5mm in diameter. They are made from high performance strong galvanised wire with diverging points (DP), which makes leg points go in opposite directions for extra strong bonding. For use with the Rapid R28 Cable Tacker.Type: 28 (white) divergent pointsSize: 10mm leg lengthQuantity: 5 x 1000
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 8 mm 5/16in
The Hozelock 2691 Multi Plus Spray Gun has a powder coated die cast metal body for increased durability and a comfortable, soft touch ergonomic handle. It also features a lockable on/off trigger that controls water flow. Eight spray patterns: Powerful Jet for cleaning, Fast Fill for filling up buckets and watering cans, Angled for producing a flat spray, Fine Mist for seedlings, High Definition Rose for gentle watering, Fan Spray for rinsing soap off cars, Aerated for producing a soft flow of water that is gentle enough to not disrupt your flower bed, and Cone for covering wide areas fast that is gentle enough to protect delicate and new flowers. Comes with a two year guarantee.
The Henry Squire Stronglock Laminated Padlocks are a medium to high security durable padlock, with a hardened steel shackle with a covered steel padlock body with anti corrosion finish. The 4-pin tumbler lock mechanism gives over 1,000 key variations. Recommended for sheds, garages, lockups, gates, greenhouses, toolboxes, lockers etc. Keyed alike and masterkeyed available to order. CRIMESTOPPERS endorsed.Size across case: 38 mm. Shackle clearance Vertical: 17 mm (hardened mild steel).Type: 35.Keyed-alike.Card of 2.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 6.40mm.Working length: 63mm.Overall length: 101mm.
The Yale 85 series deadlocking standard nightlatch security locks are some of the most widely-used front door latches. They are key operated from the outside and lever handle operated from the inside. The latch automatically deadlocks on closing the door and the snib function (bolt hold back button) enables the latch to be held back. The inside handle can also be deadlocked by a reverse turn of the key in the cylinder giving additional security (when deadlocked in this manner the latch cannot be opened from the inside only from the outside with the key) Supplied with 1109 Cylinder. The 85 series security nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door.This Yale YAL85BLXPL has a hardened Case Finish in Brasslux and the Cylinder is Finished in Polished Brass. The lock is covered by a 2 Year Guarantee and has a High Security Rating.Pack: Boxed
The BlueSpot Tools 3/8in Drive Spline Sockets are manufactured from chrome vanadium steel for added strength and durability. These sockets can be used on a range of fasteners: 6pt, 12pt, star and square. Supplied on rail. These 10 sockets cover the following sizes:- Metric: 7, 8, 9, 10, 11, 13, 14, 16, 17, 18mm, SAE: 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 23/32in
The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds. Dormer A002 HSS-TiN Coated Jobber Drill 6.50mm. Pouch of 1. Tip Diameter: 6.50mm.Working Length: 63mm.Overall Length: 101mm.
The Rentokil Air Brick Cover is ready to use and prevents access to mice and rats. Also helps prevent spiders and large insects from entering your home. Part of our safer, poison-free range.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 10.0mm.Working length: 87mm.Overall length: 133mm.
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ8LA Deep Socket has the following specifications:Socket size: 8.0mm.Length: 55mm.
The Knipex 98 Series Cable Knife is fitted with a ergonomically designed handle, VDE tested up to 10,000V and safe for work up to 1,000V. Conforms to DIN EN / IEC 60900. The handle prvides a confident grip thanks to slip-proof soft components. It also features a comfortable slip guard. The thumb recess and 'finger hook' at the end of the handle ensure a good transmission of force when the blade is pulled. The fixed straight blade is made from special tool steel, oil-hardened. Supplied with a transparent protective cap. Model 98 54: the back of the blade is insulated to avoid short circuits. Specification Blade Length: 50mmOverall Length: 190mm1 x Knipex 98 52 VDE Cable Knife
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 32mm.
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 20mm Bag Weight 500g
The DEWALT Apprentice Hiker Boots have nubuck and full grain leather uppers which are hard-wearing with antibacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.The DEWALT Apprentice Nubuck Hiker Boots have the following specification: Colour: Wheat.Size: UK 9 Euro 43.
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 79mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 32mm Box 200
Compressed composite wood biscuits for joining. The Faithfull wood biscuits are available in 3 sizes.Also available is a box of 375 assorted biscuits (sizes 0, 10, and 20) which contains a glue bottle and spreader.The Faithfull FAIDOWBIS10 wood biscuits come in a tub of 125, size no. 10. Dimensions: 53mm x 20mm
Yale's maximum security BS2 nightlatches are British Standard approved to ensure the highest level of security for timber external doors. They are Kitemarked to BS 3621:2007 and are recommended by insurance companies. These security nightlatches have been approved by the Police Secured by Design initiative. The lock is key operated from the outside and both key and lever handle operation from the inside with the internal handle being lockable for increased security. The latch automatically deadlocks on closing the door and the snib function enables the latch to be held back. The lock uses a 6 pin high performance cylinder, and has a 20mm bolt which is anti-carding. It also has a 10 year guarantee. The BS2 nightlatches have a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a glass panelled door Case Width: 89mmCase Height: 90mmCase Depth: 33mm.This Yale PBS2BLX has a hardened case finished in BrassluxSupplied with 2 x keys
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainThread. 5/8 UNC.
