Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 100mm (4in)Cut half round second Flatside: Double CutHalf-Round: Single CutTanged
The Master Lock Garage Protector Kit has a bar that locks onto a solid steel base and a solid hardened steel hidden shackle padlock with a 6-pin tumbler cylinder. It protects 'Up and Over' garage doors and provides a high security horizontal barrier at the door base. Single ground fitting with expanding security rawl bolts included.
Ronseal Garden Paint has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (Primer may be needed), terracotta, brick and stone. Garden paint adds colour, waterproofs, and improves water repellency. Its high solid content leads to a high film build and longer lasting protection. It is rainproof in 1 hour and will resist cracking and peeling. Available in many colours.1 x Ronseal Garden Paint Charcoal Grey 2.5 Litre
The Faithfull Flat Twist Knot Wire Brush is compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification: Diameter: 115 x 12mm faceThread: M14 x 2Wire: Twist Knot Stainless Steel Grade 304, 0.35mm
Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.5/16in.
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: BlackWidth: 50mm (2in)Length: 10m
These Forgefix round cable clips have hardened masonry nails for increased efficiency, and which will fix into timber, block work and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting all types of cable to timber or masonry in audio, visual and both commercial and domestic cabling. Colour: White.Cable Clip Round White 4-5mm Box 200
The Faithfull Combination Padlock has a solid brass body with a 4-pin brass tumbler mechanism. It has a hardened and plated steel shackle encompassing a self locking action. The 4-digit combination system can be simply changed at any time to any one of 10,000 possible combinations. To change the number, simply turn the shackle 180 degrees and push into padlock body and rotate the dials to the desired new number1 x Faithfull Brass Combination Padlock 38mm
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 68mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
The DEWALT Darlington Trainers have a lightweight synthetic upper with a padded collar and tongue for all-day wearer comfort. The product has a removable comfort footbed and the outsole is made from EVA and rubber, as used in sports technology footwear. They are fitted with a steel toecap that has been tested to 200 joules and an anti-scuff toecap for protection when kneeling and working. EN Test: CE EN ISO 20345-2011Safety Rating: SBSlip Rating: SRA1 x Pair of DEWALT Darlington Safety Trainers UK 7 Euro 41
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Dark Green.Size: 250ml.
Faithfull Dry Diamond Core Bits combine a professional quality 1/2in BSP threaded core with premium 8mm fluted turbo cut diamond segments. They are manufactured to offer exceptional wear and speed of cut. The V-groove segments assist in clearing debris when in use. Ideal for use in plumbing, electrical and general building installations to cut clean holes in brick and concrete blocks. Suitable for rotary use ONLY! Must not be used on percussion/hammer mode. For use with a power drill of 850 watts upward, equipped with a safety clutch and a variable speed function Do not use Diamond Cores larger than Ø78mm with SDS Plus drills as this may result in damage to the power tool or SDS adaptor. Diamond Cores give the best results when used with a purpose-built core drilling machine.1 x Faithfull Dry Diamond Core Bit 152 x 150mm
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 38mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L or 6L
The Rapid Automotive Rivets are supplied in 4 different colours to match the licence number plates on cars, vans, trailers and motorbikes. They are made from high grade aluminium to ensure a secure fix. Each pack contains 32 coloured rivets (8 each of blue, yellow, black and white) and a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4.8 x 16mm.Grip range: 9-12mm.Pack: Blister of 32.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 108 mm dia
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 46mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 10 Flexovit Aluminium Oxide Fibre Discs 115mm Fine 80g
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain25 mm P120 to suit Flexipads spindle parts FLE48105 (Hard face) FLE48205 (Soft face).Excellent for woodworking. Type: GRIP® fasteningSize: 50 mmGrade: P120
The Faithfull 4-in-1 Multi Blade Knife features a high quality, 57mm stainless steel main blade. Additionally it features a can/bottle opener, 6mm flat driver, wire stripper and a corkscrew. Fitted with an ergonomic hardwood handle and a hanging loop.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 2X.Adjustment: 45 - 60mm.
Monument Brass Plumb Bob that has a solid brass body with steel point and a hole for attachment to a line.Monument 251K Brass Plumb Bob.Weight: 230g (8oz). Size: 4.
The Union 2234E 5 Lever British Standard Mortice sashlock is ideal for timber doors hinged on the left or right and the keys are suitable for doors up to 54mm thick. The 20mm deadbolt is locked or unlocked by the key from either side, for secure positive deadlocking and additional resistance against attack. This 2234E features an anti-pick, anti-saw and anti-drill security, Chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult, Supplied with covered escutcheon to match forend. This lock has an unique pierced casing to accept bolt through door furniture. The 2234E series locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 15 Year guarantee. Deadbolt Brass, with hardened steel rollersRebate Kit 2964 (13mm, 19mm or 25mm)Supplied with 3 steel nickel plated keys The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock isForend Finish: Satin Chrome (Striking Plate Security box type, finished to match forend) Case Size: 67mm x 111mm (2.5in) Backset: 45mm This is the measurement from the edge of the door to the centre of the keyhole. Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm. Pack: Boxed
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 19 mmD = 10 mm 25/64 in
The Norbar Metric 16mm Spigot Ring End Fittings are designed to suit Norbar 16mm diameter spigot ended torque handles. They are made from forged alloy steel and the ends are easily interchangeable. The torque handle can be calibrated to give correct torque at nut/bolt.Norbar 16mm Spigot Ring End Fitting. Specification Size: 13mm.Operates Between: 0.0-107.0Nm.
The Norbar Metric 16mm Spigot Ring End Fittings are designed to suit Norbar 16mm diameter spigot ended torque handles. They are made from forged alloy steel and the ends are easily interchangeable. The torque handle can be calibrated to give correct torque at nut/bolt.Norbar 16mm Spigot Ring End Fitting. Specification Size: 14mm.Operates Between: 0.0-128.0Nm.
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size OOOAdjustment . 9.5 - 12mmAdjustment. 3/8 - 1/2in
The Norbar Metric 16mm Spigot Open End Fittings are designed to suit Norbar 16mm diameter spigot ended torque handles. They are made from forged alloy steel and the ends are easily interchangeable. The torque handle can be calibrated to give correct torque at nut/bolt.Norbar 16mm Spigot Open End Fitting. Specification Size: 30mm.Operates Between: 0.0-330.0Nm.
A DIY Philadelphia pattern brick trowel with a polished steel ferrule, metal tang, hardened and tempered blade and a wooden handle. This shape trowel is better suited to laying blocks allowing more mortar to be placed on the blade.Hardwood handleSize 280mm (11 in).
Stabila Level and Angle Device is a high grade spirit level for the home workshop. Has a horizontal vial and vial of angle setter. They are made from solid acrylic glass block. Accuracy 1 mm per metre in normal position, and the shape allows one to draw angles of 45° , 60° , 120° and 135° . Base graduated in cm and mm. Length: 250mm.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 11.5Adjustment 260 - 292mmAdjustment 10.1/4 - 11.1/2in
MEXCO Diamond Blade Reducing Bush for the reduction of diamond blade bore diameter to fit smaller spindle machines.Note: When fitting bush please ensure it is fitted securely.
1 x MEXCO Diamond Blade Reducing Bush 22.23-16mm
The MEXCO FCXCEL Grade Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread attaching directly to most angle grinders. The flush face gives the opportunity for deep cutting and flat finishing.
1 x MEXCO FCXCEL Grade Flush Cut Diamond Blade 230 x 22mm
The MEXCO FCXCEL Grade Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread attaching directly to most angle grinders. The flush face gives the opportunity for deep cutting and flat finishing.
1 x MEXCO FCXCEL Grade Flush Cut Diamond Blade 115 x 22mm
The MEXCO Fibre Cement Board PCD Blade has Polycrystalline diamond (PCD) teeth which cut through cement based fibre boards, composite materials and many other difficult applications with outstanding performance results compared to a TCT blade or diamond continuous blade. Suitable for dry cutting.
1 x MEXCO Fibre Cement Board PCD Blade 216 x 30mm x 6T
