This handy Faithfull Multimeter can be used for the measurement of DC / AC voltage, DC current and Resistance and for Diode and Transistor testing and Audible Continuity testing. This meter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. All test functions are easily accessible by rotating the 20-position range selector switch to the required function. The multimeter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a rubber protective housing with integral stand for easy visibility, a large 3½ digit LCD backlit display with auto power off and low battery warning. Features: 20-position rotary function and range selector.Precision reading and stable performance.Recessed input terminals for added safety.Supplied with test leads, battery and instruction manual.Overload protection.Easy to read backlit display panel.Auto power-off.Low battery indication.Protective rubber housing with integral stand for easy visibility.9 volt 6F22 Alkaline Battery included. Specifications: Display: 3½-digit LCD, Max reading 1999.Measuring method: Dual-slope integration A/D converter.Operating temperature: 0°C - 40°C (32°F -104°F).Dimensions: 138 x 69 x 31mm.Weight: approx. 170g (including battery).
Faithfull HEX adaptor extension for use in 13mm (1/2 inch) drill chucks. Suitable for use with the Faithfull range of diamond cores and other makes with a 1/2 inch BSP thread. Size: 12mm x 240mm, 1/2in BSP thread.
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.1 x Faithfull Turbo Cut Diamond Blade 300 x 20mm
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 230mmBore Size: 22.2mmSegment Height: 10mm.
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 125mmBore Size: 22.2mmSegment Height: 10mm.
The Faithfull Heavy-Duty Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.The Faithfull Heavy-Duty Cable Ties have the following specifications: Colour: White. Length: 900mm. Width: 9mm. Pack Quantity: 10.
The Faithfull Stainless Steel Cable Ties are manufactured using 316 grade stainless steel, they have been designed to withstand very tough working and corrosive environments. The self-locking head allows for speedy installation and locks into place anywhere along the length of the tie body. A smooth surface and rounded edges assures user safety and protection for items being tied. Designed for both internal and external applications including underground direct burial use. They are resistant to ultra violet light are chemical resistant and non-flammable and are unaffected by temperatures from -80°C to +538°C. They are also able to withstand acetic, alkali and sulphuric acid corrosion and are available in four popular lengths up to 680mm.Faithfull Stainless Steel Cable Ties have the following specification: Size: 7.9 x 680mm.Pack Size: 50.
The Faithfull Stainless Steel Cable Ties are manufactured using 316 grade stainless steel, they have been designed to withstand very tough working and corrosive environments. The self-locking head allows for speedy installation and locks into place anywhere along the length of the tie body. A smooth surface and rounded edges assures user safety and protection for items being tied. Designed for both internal and external applications including underground direct burial use. They are resistant to ultra violet light are chemical resistant and non-flammable and are unaffected by temperatures from -80°C to +538°C. They are also able to withstand acetic, alkali and sulphuric acid corrosion and are available in four popular lengths up to 680mm.Faithfull Stainless Steel Cable Ties have the following specification: Size: 7.9 x 360mm.Pack Size: 50.
The Faithfull Heavy-Duty Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.The Faithfull Heavy-Duty Cable Ties have the following specifications: Colour: White. Length: 1200mm. Width: 9mm. Pack Quantity: 10.
The Faithfull High Speed Steel Rosehead Chubby 90° included angle Countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitable for working in wood, plywood, MDF and other man made boards. Can be used in both hand tools and power drills. Type: Rosehead - Chubby.Size: 13mm (1/2in).Shank Diameter: 6mm (1/4in).
The Faithfull High Speed Steel Rosehead 90° included angle countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitable for working in wood, plywood, MDF and other man made boards. Can be used in both hand tools and power drills.Type: RoseheadSize: 13mm (1/2in)Length: 40mm (1.5/8in) Shank diam: 6mm (1/4in)
The Faithfull Rapid Chalk Line Kit contains a 30m (100ft) fast winding chalk reel. With its geared action, this chalk line winds up to 3x faster than a traditional reel. The water-resistant housing has a large mouth for easy powder refilling. Complete with 113g blue chalk refill and a handy level that can be attached to the line to offer additional accuracy. Typical applications: plumb lines for hanging wallpaper, marking out cable lines for plumbing, marking out areas for white lining, partitions or stud wall positions, guide lines for cutting timber, roof tile positions etc.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists when running cables or pipe work or for working inside confined spaces such as kitchen cabinets. The drive is fitted with a ball bearing shaft support for a long working life and a 10mm (3/8in) keyless chuck for ease of use. Attaches into any 10mm (3/8in) and larger electric or air drill chuck. Overall dimensionsL150mm x D100m x W60mm
The Faithfull External Spring Calipers have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 150mm (6 in)
The Faithfull D.I.Y Vernier Calipers which are manufactured from mild steel with dual reading in imperial and metric. The universal three-way measurement facility enables readings in external, internal and depth modes.The sliding thumb-lock feature easily allows quick and precise measurements to be taken. Metric and Imperial dual reading with a handy locking function. Range: 125mm (5in).Graduations: 1.0mm and 0.16in increments.
This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in. The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe. Specifications: Measuring range: 0-75mm (0-3in).Resolution: 0.01mm (0.0005in).Accuracy: ± 0.02mm (0.001in).Auto off: 5 minutes.Display: LCD, character height 8mm.
Faithfull Butt Welding Clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring minimal grinding after completion. The clamps are simple to use for assembling and fabricating. Ideal for use when welding patch repairs in floors, wings, door skins or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels. Using the clamps to assemble the workpiece: Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp, with the toggle bar underneath. Tighten the wing nut to pull the toggle bar up locking the two sheets together side by side. Once the two sections have been tack welded together, the wing nut can be slackened and the toggle bar removed, the clamp can then be lifted from the job prior to final welding.
The Faithfull Centre Cut High-Tensile Bolt Cutters with cutting blades forged entirely from heavily alloyed steel which produces a thoroughly hardened blade with a sound structure. The ground edges of the cutting blades are subjected to a second hardening process which ensures maximum hardness of the cutting surface. The cutter head may be adjusted to compensate for blade wear. Suitable for cutting High-Tensile steel bars, bolts, chain and metal sections.Size: 760 mm (30-inch).Cutting Capacity:Mild Steel: 12 mm.High Tensile: 10 mm.
The Faithfull Centre Cut High-Tensile Bolt Cutters with cutting blades forged entirely from heavily alloyed steel which produces a thoroughly hardened blade with a sound structure. The ground edges of the cutting blades are subjected to a second hardening process which ensures maximum hardness of the cutting surface. The cutter head may be adjusted to compensate for blade wear. Suitable for cutting High-Tensile steel bars, bolts, chain and metal sections.Size: 610 mm (24-inch).Cutting Capacity:Mild Steel: 10 mm.High Tensile: 8 mm.
The Faithfull Centre Cut High-Tensile Bolt Cutters with cutting blades forged entirely from heavily alloyed steel which produces a thoroughly hardened blade with a sound structure. The ground edges of the cutting blades are subjected to a second hardening process which ensures maximum hardness of the cutting surface. The cutter head may be adjusted to compensate for blade wear. Suitable for cutting High-Tensile steel bars, bolts, chain and metal sections.These Faithfull Centre Cut High-Tensile Bolt Cutters have the following specification: Length: 355mm (14in).Capacity: Mild Steel: 6.5mm, High Tensile: 4.8mm.
Faithfull Barrier Fencing is a temporary, flexible fencing for fast erection and visibility. Made from durable polypropylene. Its bright orange colour is highly visible. Used widely on construction sites and anywhere that requires demarcation areas. Specification: Width: 1mLength: 50m
The Faithfull Scratch Awl is used for scribing, aligning and punching holes in leather, canvas, wood and soft alloys etc. It has a hardwood handle that is ergonomically shaped for a comfortable grip. The steel blade continues through the handle and is secured to a steel top cap. Blade length: 92mm (3.1/2in).Overall length: 165mm (6.1/2in).
This Faithfull elasticated braided Tow Rope is fitted with heavy-duty forged carabiner style end hooks and supplied with a red middle marker. Elastic towing ropes work by taking up the slack when the cars are slowing down and by easing in the towing load when pulling away. The rope is rot resistant and has a breaking strain of 3000kg (3 Tonnes). Suitable for all cars and vans up to 3000kg (3 Tonnes). Supplied complete in a zip-up bag for easy car boot or garage storage. Specifications: Length: 4m (approx.)Breaking strain: 3000kg (3 Tonnes)
