The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW15020WG is a 150mm x 20mm wheel and is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 4,500
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 16mm x 19.05mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull G Clamp is made from malleable SG iron, making it suitable for a wide variety of metalworking and woodworking applications. Accurately machined spindles provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion.Capacity: 200mm (8in)Throat Depth: 76mm (3in)
The Faithfull G Clamp is made from malleable SG iron, making it suitable for a wide variety of metalworking and woodworking applications. Accurately machined spindles provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion.1 x Faithfull Medium-Duty G Clamp 75mm (3in)
The Faithfull G Clamp is made from malleable SG iron, making it suitable for a wide variety of metalworking and woodworking applications. Accurately machined spindles provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion.1 x Faithfull Medium-Duty G Clamp 50mm (2in)
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: M8 x 1.0
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: 5/16in BSF
The Faithfull heavy-duty side lever grease gun develops up to 10,000 psi - 690 bar of pressure. The gun features an aluminium diecast head with an easy locking plunger system and ergonomic pump handle grip. The positive grip plunger handle, and the bulk loader system with an air release valve, combine to make this grease gun very efficient and easy to use. A variable lever stroke feature is built-in for use in confined areas and the four jaw hydraulic coupler ensures that the grease goes exactly where it is needed at the press of the lever. With a 500g (16oz) capacity, the gun can be bulk filled by its suction action but will also accept 400g grease cartridges.
Standard hydraulic coupler to suit most greasing application, fitted with a spring loaded ball check mechanism to prevent pressure loss and four fully hardened spring steel jaws for a long service life. This product is for use with hand operated grease guns only with a working pressure of up to 6,000psi / 413 bar.Fits Faithfull grease guns FAI GGHD and FAI GGMP and flexible hoses FAI GGHOSE12 and FAI GGHOSE18.Suitable for use hand operated grease guns with a 1/8in BSPT thread and working pressure not exceeding 6,000psi / 413 bar.
The Faithfull FAIGDSET4 is for drilling glass windows, mirrors, bottles and ceramics - for use in variable speed drills only. These drillbits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. Note: Lubricate with water for best results The Faithfull FAIGDSET4 is a set of 4 glass drills in a plastic case and comes in the following sizes: 3, 4, 5 and 6mm.
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.The FAIGD7 Tile & Glass Drillbit has the following specifications: Size: 7mm. Length: 60mm.
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 5 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 4 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 3 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 10mmLength 90mm
The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable.The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure.The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications.1 x Faithfull Heavy-Duty G Clamp 75mm (3in)
The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable.The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure.The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications.1 x Faithfull Heavy-Duty G Clamp 300mm (12in)
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).The FAIFIRSC8 Engineers' File has the following specifications: Cut: Round Second. Blade Length: 200mm (8 in). Blade Width: 8mm (5/16 in).
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).Cut round second Blade Length: 250mm (10in)Blade Width: 9mm (5/16in)
