The Makita DHP482 LXT Combi Drill features an all-metal gear construction for high transmission durability. Its variable 2-speed, reversible motor features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions. It also features twin LED job lights with pre-glow and after-glow functions.Ideal for the professional or DIY enthusiast. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 & Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm.The Makita DHP482Z Combi Drill features an all-metal gear construction for high transmission durability.Its variable 2-speed, reversible motor features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions.It also features twin LED job lights with pre-glow and after-glow functions. Ideal for the professional or DIY enthusiast. It comes as a 18V bare unit, NO battery or charger included. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 & Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm.
Faithfull Magnetic Impact Nut Driver is specifically designed and for use in high torque impact drivers. The magnetic hex socket is ideal for repetitive jobs requiring the setting and removal of bolts and nuts. Manufactured from unique high-grade steel specially engineered for extreme durability and increased working life.1 x Faithfull Magnetic Impact Nut Driver 13mm x 1/4in Hex.
The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging. Length: 355 mm (14in).Cutter width: 50 mm (2in).
The Brennenstuhl Auto Cable Reel features safety cut-out and extra protection against contact. Its cable is made from oil-resistant, rubber-neoprene. The robust plastic housing protects the cable from damage and enables comfortable rolling of the extension cable. It can be fitted to walls and ceilings, and is also slewable up to 160 degree. IP44 rated, suitable for outdoor use. Nominal Current: 16AThis Brennenstuhl Auto Cable Reel has the following specification: Cable Length: 9mAdditional Cable Length: 2mNominal Current: 16ASocket Number: 1Cable Designation: H05VV-F 3G1,5Dimensions (H x L x W): 29 x 15 x 36cmWeight: 4.64kg
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.The DEWALT DEWDT6519QZ multi material drill bit has the following dimensions:Size: 6mm x 123mm.
Lufkin Folding Measuring Wheel has an accurate measurements up to 9999.9m. The wheel is calibrated to counter and is accurate for estimated measurements. Wheel brake and reset is located on the handle for convenient multiple measurements. Whilst the 160mm wheel diameter guarantees accurate measurements both indoors and out. Includes carry bag. Specification Size: Extend: 1040mm, Folded: 430mm. Weight: 1.1kg.
3 x Self adhesive replacement abrasives for Multi-Sharp® mower sharpeners.3 x Self adhesive replacement abrasives for Multi-Sharp® MS 1101 cylinder mower sharpener 30cm/12in.
The Makita DVC155L Cordless BL LXT Class L Wet & Dry Vacuum is powered by 2 x 18V Li-ion batteries in series (not supplied), to supply energy to the powerful 36V DC motor drive system. Class L rated, removes 99.0% of dust with limit value for occupational exposure >1.0mg/m3. For both wet and dry vacuum cleaning. Fitted with a durable, brushless motor that provides extended run time and increased efficiency. Suction speed is controlled via a dial, providing increased control. A large bumper helps protect walls and furniture from bumps and scratches. Castor stopper wheels prevent the cleaner from moving unintentionally. Compatible with commercial plastic bags. It has a large, removable onboard storage system for convenient storage of the hose, front cuffs, pipes, nozzles and power supply cord. Standard Accessories: 1 x Hose 1.7m x 32mm, 1 x Poly Bag Set, 1 x Aluminium Telescopic Pipe, 1 x Bent Pipe, 1 x F/C Switching Nozzle, 1 x Long Sash Nozzle, 1 x Removable Storage Box. Bare Unit - No Battery or Charger supplied. Specification: Tank Capacity: Wet 12 litre, Dry 15 litreMax. Airflow: 2.1m³/min.Max. Sealed Suction 11 kPaWeight: 7.2kg
The DEWALT Radial Safety Brown Boots have a full grain, distressed brown (Crazy Horse), waxy leather upper. With elasticated sides and 2 woven pull loops to the front and rear for easy putting on/removal. They are fitted with a steel toecap that has been tested to 200 Joules. Also a steel midsole for underfoot protection. Fitted with a comfort insole for all day comfort with a Phylon/rubber outsole. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Radial Safety Brown Boots UK 11 Euro 45
These Roughneck Flared Screwdrivers have blades made from S2 steel, which has been hardened and tempered. They have magnetic tips and triple injected soft-grip handles. For easy identification, the screwdrivers' handles have the size and type clearly written on the handle, with a larger graphic at the end of the handle.Specifications:Tip type: Flared.Size: 6mm x 100mm.
The Marshalltown MXS Series Plasterers Finishing Trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved DuraSoft® handle is held firmly by a nut and washer.Marshalltown MXS1D Plasterer's Finishing Trowel Size: 280 x 115mm (11 x 4 1/2in).
This Insulated Trench Fork from Bulldog's Premier range has solid forged managanese steel head and socket. It has a 711mm solid fibreglass shaft and a rubber collar to protect and insulate your hand. It is the ideal tool for breaking up hard and compacted lumps and hard ground. Each tool is tested to 10,000 volts and guaranteed to 1,000 volts.Features:Insulated 'Wear' Collar.Tested to 10,000 Volts.Guaranteed to 1,000 Volts.Individually Certificated.Forged in Britain.Size of head: 310 x 210mm (12.1/4in x 8.1/4in).Handle length: 711mm (28in).
Polycell Polyfilla for Wood is a ready to use, low odour, multi purpose wood filler for general and minor repairs to interior and exterior wood. The formulation is quick drying, giving a tough and durable fill that flexes with the natural movement of wood. Can be painted, stained or varnished in 2 hours (depending on conditions) and fills holes up to 10mm deep in one application. The filler will not shrink or crack, and can be nailed or screwed. It is water resistant, and can be used for interior and exterior use.Polycell Polyfilla For Wood General Repairs Tube. Colour: Medium.Size: 330g.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 15.0 mm 19/32in. Cutting Length 25 mm Shank Diameter: 1/4in.
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting. Specification: Length: 300mm (12in)Teeth: 6 TPI
The Faithfull Prestige Internal Corner Trowel has been designed to provide a clean edge for internal corners. The blade is made from one-piece of stainless steel. Fitted with an ergonomic soft grip handle that provides superior grip. The Prestige range is manufactured to the highest standards and is also covered by a 10 year guarantee. Specification: Blade Size: 125 x 100mm (5 x 4in)
The Fiskars FSK137210 Premium Planters™ Transplanter works very well in hard ground and its narrow construction makes it perfect for use in narrow bed layouts and on balconies. The robust construction is complemented by a corrosion resistant stainless steel blade with a sharp blade edge for better penetration into the soil. The durable and lightweight FiberComp™ body makes it easy to handle and the hanging hole makes for easy storage after your planting work is done. Length: 350mm.Width: 68mm.Weight: 100g.
Faithfull Snap-Off Blades in a handy automatic blade dispenser. These will fit Faithfull and most other brands of snap-off knives. 1 x Pack of 10 Strips. Size options available: FAITKBS9: 9mm / 13 segmentsFAITKBS18: 18mm / 8 segmentsA pack of ten blades in a handy automatic blade dispenser. These will fit Faithfull and most other brands of snap-off knives.Size: 18mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 12.0mm.Total length: 160mm.Working length: 100mm.
The SDS Max Steel tile chisel is ideal for heavy-duty chiselling, channelling and demolition tasks in concrete, stone (medium hardness), floor and wall tiles, general masonry and mortar. This tile chisel features specially toughened steel and micro-processor controlled heat treatment which ensures consistent tough bits with long life. The DEWALT DEWDT6834QZ SDS Max steel tile chisel has the following dimensions:Width: 80mmLength: 300mm
This Stanley polyester roller sleeve has a short pile which is ideal for emulsion and water-based paints. It gives good performance, with great pick-up and coverage and an even finish. The roller sleeve is made from polyester fabric and is suitable for smooth surfaces. Specifications:Size: 230mm (9in).Pile height: 6mm.Diameter: 38mm (1.1/2in).
Sets of non-interlocking zinc stencils in a range of sizes. Useful for making signs and marking cartons and packing cases.Letter set contains - 27 pieces consisting A to Z. Letter Size: 2 1/2in
Roughneck Skeleton Type Caulking Gun is a lightweight and economical skeleton type caulking gun with a solid frame, ratchet action and an end hook. The 280mm (11in) gun can accommodate up to 400ml cartridges and has a quick release trigger and built-in nozzle cleaner.
The Forgefast Wafer Head Torx® Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.Forgeast Wafer Head Torx® Compatible Construction T40 Screws Size: 8 x 140mm.Pack Size: Tub of 35.Finish: Tan elementech 2000.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
This R.S.T. Taping Knife is suitable for drywall lining. It has a soft touch handle for increased user comfort.The blade is made from blued steel. Size: 200mm (8 inch).
An impact-resistant ABS plastic level that will withstand temperatures between -15° C and +60° C. It has impact resistant tubular vials vials with extremely high transparency and durability. Sensitivity of 13 mm/m and a tolerance in normal position of ± 1.5 mm/m. The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.
These Forgefix Veneer Pins are ideal for lightweight and decorative tasks. Their shape helps to reduce splitting in hard or brittle wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixings decorative timber mouldings.Veneer Pin 20mm Bag Weight 250g
The Faithfull impact grade bit holders, featuring a versatile quick release chuck, accepts all standard 1/4in hex shank bits of 25mm & 50mm length or double ended format. Engineered to withstand the extreme pressures and torque exerted by modern impact drivers and drill drivers, these holders give outstanding performance in all screw driving applications. Available in 75mm or 150mm long shafts, they help provide accessibility to the most awkward to reach places.The chuck accepts all international hex shank sizes including ANSI, JIS and DIN standard screw bits and accessories.The FAISBMBH75U is 75mm long
These Faithfull VDE Pliers are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to EN 60900:2012. All Faithfull VDE rated tools can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC. These combination pliers are designed for both gripping and cutting applications and have induction hardened cutting edges for cutting medium-hard wire. Cutting Capacity: 2.0mm.Length: 190mm.Cutting capacity: 1.8mm.
The ultimate tool for maintained razor edges, even on hard stainless blades. For the food service and meat processing industries. Long wearing monocrystalline diamond surface.Solid steel round rod for maximum diamond surface.Large Safety Guard.Colour coded hang ring for identification.High impact resin handle.Red Fine.Size. 300mm (12 in).
The Moore & Wright DFC Series Digital Calipers are fitted with an extra large, easy-to-read display. The calipers have a high measuring speed of 120in per second and you can read/convert measurements in inch, metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
Can be used as a wrecking bar, nail puller and utility or ripping bar. The low profile wide, flattened claw fits further under the workpiece for increased prying power and it resists sinking into the support surface. Forged from high quality carbon steel.1 x Faithfull Tuff Bar 600mm (24in)
