McAlpine ST90CPTOP+TUBE is a chrome-plated plastic flange and dip tube designed for use with 90mm shower traps. The dip tube is designed to fit inside the shower trap and prevent debris from entering the drainage system. The flange is designed to fit over the top of the shower tray or bath, providing a neat and tidy finish.
The McAlpine ST90CPTOP+TUBE has a diameter of 113mm and is made from high-quality materials, ensuring durability and longevity. The chrome-plated finish provides an attractive and easy-to-clean surface, making it ideal for use in bathrooms and wet rooms.
Overall, the McAlpine ST90CPTOP+TUBE is a reliable and effective solution for preventing blockages and maintaining good hygiene in your shower or bath drainage system.
・ Suits ST90 Trap
・ Includes Dip Tube
・ Full range of spare parts and accessories are available on The Plumbers Mate
Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications: Mix Ratio: 1:1Work Life: As a mix: 4 1/2 - 5 minutesSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity 25°C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: ClearViscosity 25°C: 130 poiseSpecific Gravity: 1.14
The McAlpine TSG1-Reducer is a plumbing accessory designed for use in drainage systems. It is a trapped gully outlet reducer that has a 2" x 1.5" socket reducer, allowing for easy connection to various plumbing systems.
The trapped gully outlet reducer is made of durable materials, ensuring long-lasting performance and resistance to corrosion. It is easy to install and is suitable for use in both domestic and commercial plumbing systems.
The McAlpine TSG1-Reducer can be used with the McAlpine TSG1-Trapped Gully and other compatible plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
The McAlpine ST90CP10-V is a water seal shower trap that is designed to be used with a 2" universal vertical outlet. The trap has a removable 110mm flange, which makes it easy to clean and maintain. The trap has a water seal of 50mm and is designed to prevent foul odors from entering the bathroom.
The trap is made from high-quality materials, which make it durable and long-lasting. The trap is easy to install and comes with clear instructions to guide you through the installation process.
Overall, the McAlpine ST90CP10-V is a reliable and efficient shower trap that is perfect for use in any bathroom. It is important to ensure that you choose the correct size and type of trap for your shower to ensure proper function and prevent issues such as clogs and foul odors.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 2" Universal Vertical Outlet
・ Removable 110mm flange facilitates easy cleaning
Bulldog Evergreen hand fork is made from the best quality carbon steel with a heavy-duty tang that is welded to the blade, for increased durability. Has a soft touch handle that is fitted for extra comfort when gardening. It is perfectly suited for use amongst small plants or seedlings. Evergreen garden tools are manufactured to the highest standards, offering a 10 year guarantee against faulty workmanship and materials. Blade Width: 3in (75mm).
The McAlpine WC-CON8F-S-BTW is a flexible WC connector designed for use with back to wall toilet pans. It features a 97-107mm inlet and a 90° bend for easy installation in a horizontal position. The connector is made from high-quality, durable materials to ensure a long-lasting, reliable connection. The flexibility of the connector allows for easy adjustment and maneuverability during installation, making it ideal for use in tight spaces or where access is limited. This product is designed to provide a secure and leak-free connection between the toilet pan and the waste pipe.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
The McAlpine BSW6PC Centre Pin Sink Waste is a plumbing fitting designed for use with a sink. The waste has an 85mm stainless steel flange that is designed to fit neatly into the sink, and a plug to prevent water from draining away when required.
The centre pin design of this sink waste means that it can be easily installed in a sink with a central waste hole, and the stainless steel construction ensures durability and resistance to corrosion. The waste is also designed to be easy to clean and maintain, helping to keep your sink hygienic and free from blockages.
When installing this sink waste, it is important to follow the manufacturer's instructions carefully to ensure a secure and watertight fit. It is also recommended that you use a professional plumber to install the waste, especially if you are not familiar with plumbing installations.
・ Available in 1¼", 1½" and 2" sizes
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine WCTRAP4P is a 50mm Water Seal Pushfit 'P' Trap designed for use in plumbing systems to prevent foul odors from entering a building or property. It is typically used in conjunction with sinks, baths, and other sanitaryware.
The 'P' trap design allows for a water seal to be maintained within the trap, which prevents foul smells and gases from traveling up through the plumbing system and into the building. The water seal also helps to prevent blockages by trapping debris within the trap, rather than allowing it to pass through the system.
The pushfit design of the McAlpine WCTRAP4P makes it easy to install without the need for any additional fittings or tools. The trap simply pushes onto the waste pipe and locks in place, providing a secure and reliable connection.
Overall, the McAlpine WCTRAP4P 50mm Water Seal Pushfit 'P' Trap is a high-quality plumbing component that is suitable for a wide range of applications in both commercial and residential settings.
The McAlpine BSW10PR 1½" Centre Pin Sink Waste is a plumbing component designed to connect a sink or basin to a waste pipe. This waste is designed with a 70mm stainless steel flange that is designed to fit over the sink or basin outlet and provide a secure and leak-free seal. The flange also provides a sleek and modern appearance to the sink or basin.
The centre pin design of the BSW10PR allows for easy installation and removal of the waste plug. The waste plug is included with the waste and features a black PVC handle for easy removal and maintenance.
The BSW10PR is suitable for use with sinks or basins with a 1.1/2" BSP (British Standard Pipe) outlet. The waste is made from high-quality materials, ensuring that it is durable and long-lasting even in challenging plumbing environments.
Overall, the McAlpine BSW10PR 1½" Centre Pin Sink Waste is a reliable and stylish plumbing component that can help you to connect a sink or basin to a waste pipe. Whether you are working on a large-scale plumbing project or a small DIY job, this waste can help you to ensure that your plumbing connections are secure and leak-free while maintaining a modern and sleek appearance. The black PVC handle plug also adds a touch of style and makes it easier to remove and clean the waste.
・ 1½" BSP
・ Black PVC handle plug
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The 70mm polished stainless steel flange eliminates the problem of chrome plating deterioration
・ Manufactured in Polypropylene
The BOA Micro Grabit Kit is made from high quality hardened steel, fits all standard variable speed drills and will cleanly remove a variety of screws and bolts. Suitable for electronic, precision equipment and the medical industry. Removes: Wood Screws: 1.5-5mm, Bolts: 3-6mm
The McAlpine T12E is a coupling fitting that connects a 1 1/2-inch female BSP (British Standard Pipe) threaded pipe to a 2-inch male BSP threaded pipe. This coupling is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
It's important to note that BSP threads are used primarily in Europe and Asia, while the US typically uses NPT (National Pipe Thread) or NPS (National Pipe Straight) threads. Therefore, if you are in the US or another country that primarily uses NPT or NPS threads, you may need to use an adapter or different type of fitting to connect your pipes.
・ Available in 9 sizes
・ Waste Outlet Reducer
This Faithfull PVC Saddleback Broom has the following specification: Width: 325mm (13in)Handle Length: 1.37m (54in)Socket: 28mm (1.1/8in)Replacement Handle Code: FAIRH54118
The Stanley PowerLock® Top Reader Tape has a clear viewing window on the top of the case. Ideal for those taking internal measurements on a regular basis as the length of the case is taken into account by the measurement you see within the viewing window. Its Mylar coated steel blade with metric graduations. That is up to 10 times more resistant to abrasion than normal lacquered blades. Tipped by a super-strong 3 rivet, automatically adjustable tru-zero end hook. Supplied in a high-impact, chrome plated ABS plastic case with a smooth, quick-grab auto-locking mechanism and a conventional steel belt clip.
These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Mudguard Washers ZP M8 x 50 Bag 10
The McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap with 1¼" Universal Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a basin.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" universal outlet, which allows for easy installation with a range of different waste pipe materials.
The adjustable inlet on the trap allows for easy installation in situations where the waste pipe is offset from the basin outlet. This helps to ensure a secure and reliable connection between the basin and the waste pipe.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap, simply connect the trap to the basin waste outlet using the adjustable inlet, ensuring a secure connection. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 75mm Water Seal
・ 1¼" Universal Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Includes Cleaning Eye
・ Manufactured in polypropylene
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
The McAlpine M/Fit 1 1/2" 95 Deg Bend X Bsp Coupling Nut is a plumbing component used in the installation of drainage systems. Here's what each of these terms mean:
McAlpine: McAlpine is a brand that produces plumbing products, including pipes, fittings, and traps, that are used in the construction and maintenance of drainage systems.
M/Fit: M/Fit is a type of fitting made by McAlpine that is designed to connect pipes with different diameters. It is a compression fitting, meaning that it uses pressure to hold the pipes together.
1 1/2": This refers to the diameter of the pipe that the fitting is designed to connect. In this case, it is a 1 1/2" diameter pipe.
95 Deg Bend: This refers to the angle at which the pipe will bend when this fitting is installed. In this case, it will bend at a 95 degree angle.
BSP: BSP stands for British Standard Pipe, which is a type of thread used in plumbing fittings in the UK. It is designed to create a tight seal between the fitting and the pipe.
Coupling Nut: This is the part of the fitting that connects the pipes together. It is a nut that screws onto the threaded end of the fitting, securing the pipes in place.
・ Available in 1¼" and 1½" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The Dormer P801 Solid Carbide Rotary Burrs have cylinders without endcuts and produce double cuts. The first choice for general machining, improves ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reducing vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Rotary Burr - Cylinder Without Endcut has the following specification: Diameter: 9.6mm.Shank Diameter: 6mm.Working Length: 19mm.Overall Length: 64mm.
The Bulldog Premier Bypass Shears are strong and durable. The blade is made from stainless steel, and the soft grip handles provide comfort. The shears have a flip lock at the end of the handle to prevent accidental locking when in use. They are ideal for pruning live growth.
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: M10 x 1.0
The McAlpine FLEX-JKS is a flexible fitting designed for use in plumbing systems. It is manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The FLEX-JKS features a BSP (British Standard Pipe) coupling nut on one end and a BSP male thread on the other end. This design allows the fitting to be easily installed in a variety of plumbing applications, including those that require a flexible connection between two pipes.
The flexible design of the fitting allows for some movement between the pipes, which can help to reduce stress on the plumbing system and prevent leaks or damage. The FLEX-JKS is made from high-quality materials and is designed to be durable and long-lasting, providing reliable performance over time.
Overall, the McAlpine FLEX-JKS is a versatile and reliable component of a plumbing system, particularly in situations where a flexible connection is required. Its BSP coupling nut and BSP male thread make it easy to install and compatible with a wide range of plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Offers complete flexibility for any required angle or offset
・ Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000
・ Approximate adjustable lengths below
Everbuild Patio Wizard kills Algae, Green Growth, Mould and Fungi on patios, paths, driveways and all hard surfaces. It is a cleaner that safely removes all types of green growth without the need for any washing off, scrubbing and pressure washing. Available in standard 10 to 1 concentrate in 1 & 5 litres (1 litre makes 10 litres and 5 litres of concentrate makes 50 litres) and 50ml concentrated Sachets that are mixed with 5 litres of water.Everbuild Patio Wizard Concentrate 5 litre
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
Introducing the Plasson Mechanical Plastic Wrench, a versatile tool designed for ease of installation of Plasson fittings. This wrench is specifically engineered to handle compression fittings with a diameter ranging from 16mm to 40mm. The wrench is suitable for a variety of applications, making it an essential addition to any toolkit.
Key Features:
- Universal Fit: The Plasson Mechanical Plastic Wrench is compatible with compression fittings from 16mm to 40mm in diameter, ensuring a perfect fit for a wide range of applications.
- Durable Construction: Constructed from high-quality plastic materials, this wrench is designed to withstand the rigors of daily use, providing reliable performance and longevity.
- Easy to Use: The ergonomic design of the wrench allows for comfortable handling and easy operation, making it ideal for both professional plumbers and DIY enthusiasts.
The Plasson Mechanical Plastic Wrench is a must-have tool for anyone working with Plasson fittings. Its robust construction, combined with its versatile size range, makes it a reliable and efficient tool for any job. Order yours today and experience the convenience and effectiveness of this high-quality wrench.
The Faithfull Rubber Edge Squeegee is designed to apply grouting to wall and floor tiles after fixing. Its strong, flexible plastic blade allows the grout to be spread quickly helping make light work of big grouting projects. An easy-grip handle provides user comfort. Blade size: 190mm.
Introducing the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – Streamlined Efficiency and Hygiene for Your Kitchen Plumbing!
Upgrade your kitchen with the McAlpine FSW2PC-70, an innovative 1.5" Combined Sink Waste and Overflow designed to optimize functionality and maintain cleanliness. Expertly crafted with precision engineering, this combined waste and overflow system sets a new standard for efficiency and reliability in your kitchen plumbing.
Key Features:
Integrated Waste and Overflow: The FSW2PC-70 ingeniously combines waste and overflow functions within a single, efficient unit. This integrated design not only simplifies your kitchen plumbing setup but also ensures consistent water drainage and overflow prevention with a single, reliable solution.
Optimal 1.5" Size: With a 1.5" size, this combined waste and overflow system provides ample capacity for efficient water flow in your kitchen sink. The optimal size guarantees quick drainage, preventing water buildup and maintaining a hygienic and clean kitchen environment.
Hygienic Trap Seal: The FSW2PC-70 features a trap seal that effectively blocks foul odors and sewer gases from entering your kitchen. This hygienic design promotes a pleasant and fresh atmosphere in your kitchen space.
Durable Construction: Crafted from high-quality materials, this combined waste and overflow system ensures durability and longevity. The robust construction is resistant to corrosion and wear, providing a dependable solution that withstands the rigors of daily kitchen use.
Effortless Installation: Designed for user-friendly installation, the McAlpine FSW2PC-70 simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your kitchen plumbing with the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – where efficiency meets hygiene. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your sink but also provide a durable and reliable component for years to come. Elevate your kitchen experience with the FSW2PC-70, setting a new standard in combined waste and overflow excellence.
Sink Combined Waste and Overflow: Stainless Steel Flange: Chrome Plated Overflow Grid: Black PVC Plug and Chrome Plated Chain: Centre Pin Model
Available in 1.25” and 1.5” sizes
Available with 70mm or 85mm flange
Chrome Plated Plastic overflow grid
Black PVC plug and CP chain
Flexible overflow tube has OD of 25mm
Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
The polished stainless steel flange eliminates the problem of chrome plating deterioration
Manufactured in Polypropylene
DEFENDER TSA approved die-cast padlocks, designed for use in airports to aid Transport Security Administration (TSA) screeners. For security reasons they may open and inspect luggage and will forcibly remove locks that are not TSA compliant. At USA airports the use is effectively compulsory if you want your luggage to remain secure. Uses a 3-wheel combination mechanism for convenience and offers 1,000 differs.
The Grohe Tempesta 200 Shower System with Diverter is designed to enhance your shower experience with its sleek chrome finish and modern design. Ideal for contemporary bathrooms, this system combines functionality with style.
High-Quality Chrome Finish: Ensures durability and a modern aesthetic.
Easy Installation: Designed for quick and hassle-free setup.
Versatile Diverter: Allows seamless switching between shower and bath.
Comfortable Water Flow: Provides a relaxing shower experience.
Compatible with Various Bathroom Styles: Fits well in both modern and traditional settings.
McAlpine ABS32/35G-MB is a Matt Black Brass compression straight connector designed to connect ABS (Acrylonitrile Butadiene Styrene) waste pipes and fittings to brass compression fittings. The connector should be used in conjunction with ABS solvent weld pipes and fittings that conform to the BS EN 1329-1:2000 standard.
The McAlpine STW8B-95 is a 50mm water seal shower trap with a universal outlet. It is designed to be used in conjunction with standard 1½" UK plumbing and is suitable for use with most shower trays and enclosures.
The water seal on the STW8B-95 trap prevents foul odours from escaping from the drainage system, while the universal outlet ensures that it can be connected to a variety of waste pipes. The trap is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install.
The STW8B-95 shower trap features a brass body and chrome-plated cover, which gives it a stylish and modern appearance. The low profile design of the trap makes it ideal for use in shallow shower trays, while the removable trap body makes it easy to clean and maintain.
Overall, the McAlpine STW8B-95 shower trap is a reliable and effective solution for preventing foul odours from escaping from the drainage system. Its universal outlet and stylish design make it a versatile option that can be used in a wide range of shower trays and enclosures, while its high-quality construction ensures that it will provide long-lasting performance.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
