Everbuild Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture. Chloride Free. Areas of Use- Mortars (not metal reinforced)- Floor screeds- External/Internal cement based rendering- Concrete (not structural)- Suitable for use as an emergency repair plugging aid when mixed neat
Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions. For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Monument Stiffnuts Professional Boxed Kit. 1/2-inch. and 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube and full instructions.
The DEWALT DCS380 XR Premium Reciprocating Saw has a powerful fan cooled motor. The high performance reciprocating mechanism and lightweight magnesium gearcase offer the user optimised power to weight ratio and the intelligent variable speed trigger, lock-off switch and electronic motor brake gives quick controlled cuts and enhanced work safety. It has a lever-action keyless blade clamp for quick and easy blade changes, pivoting adjustable shoe with open top for high stability and blade visibility during a cut and the four-position blade clamp allows for flush cutting and increased versatility. The saw has a modular component design for trouble free servicing with rubber coated grip to reduce surface vibration and user fatigue. Specifications: No Load Speed: 0-2,950/min.Stroke Length: 28.6mmLength: 425mmWeight: 3.3kgDEWALT DCS380N XR Premium Reciprocating Saw 18V Bare Unit, No Battery or Charger Supplied.
Floor Flex Plus is a premium rubber based latex additive for use with Self Level Floor Compound and powder tile adhesives to both strengthen the mix and provide a limited degree of movement capability in the sub floor. Ideal for use when covering sound timber floors. A 5 litre container is sufficient to mix a 20 kilo bag of Self Level Floor Compound or adhesive.
The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 38mm.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 6mm leg length.Quantity: 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 8mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 14mm leg length.Quantity: 5,000. Flat wire staples have a larger holding area against the material, making it ideal for thin plastic or insulation.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 8mm leg length.Quantity: 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
The Monument hydro-jet pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets and drains. First you fill the unit with water then hold the unit over the waste and pump down (or hit) the handle to create a powerful water jet to help clear any blockage. To clean the MON1452 simply just flush with clean water. Size: 35cm x 7cm x 7cm.
Ronseal 10 Year Woodstain offers the best protection against the weather, leaving your wood looking great for 10 years. You don't need to use any base coats or primers. It won't flake or peel. BBA approved.Suitable for all smooth planed exterior wood. Not suitable for decking. Specification: Drying Time: 1 hourCoverage: 18m²/LThis Ronseal 10 Year Woodstain has the following specification: Colour: Antique PineSize: 250mlDrying Time: 1 hourCoverage: 18m²/L
The ABUS 26 Series Diskus® Padlocks has a body made from heavy-duty stainless steel. Fitted with a precision pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull and manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks. Diskus® 'Deep Weld Technology' offers maximum case strength. Key operated, lock retains key until locked. Key operated, lock retains key until locked. Ideal for securing valuables/goods of great value or at a very high risk of theft, warehouses, factory gates, containers and lorries. Made in Germany.This ABUS 26/70 Diskus® Padlock is supplied with 2 keys. Specification ABUS Security Level: 8.Keyed Alike Key Reference: RR00377. Shackle Width: 19.5mm.Shackle Height: 17mm.Shackle Diameter: 10mm. Overall Width: 71mm.Overall Height: 71mm.Overall Depth: 30mm.
Stablia Torpedo Level, is a sturdy level with two shockproof vials (one horizontal and one vertical). Has an epoxy locked top frame and a lasting accuracy of 0.029° = 0.5mm/m in vial up position.Stabila 70TMW Torpedo Level with magnetic base and additional angle finder vial. Length: 250mm (10 in).
Rapid No. 53 precision cut fine wire staples are made from high performance galvanised steel for strength and durability. The fine wire makes the fixed staple almost invisible, ideal for fabrics, decoration, small construction and light repair.Type: 53 (galvanised)Size: 6mm leg length.Quantity: 2500. For use with the Rapid R453, MS4.1, Compacta, R153, R353, MS610, MS853, Alu 753, ESN530, R553, Hobby Electric and PS6-16 tackers.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44030 Combination Spanner has the following specifications:Head size: 30mm.Length: 340mm.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502818 Blue Groove 4x flat bit has the following specific dimension:Diameter: 28mm
Rapid No. 8 brads are precision cut, high-performance steel brads (with head). They are ideal for carpentry, panels, baseboards and light furniture. Precision cut wire ensures the best incision.Specifications:Length: 15mm.Box: 1,000. For use with the Rapid Hobby Staple gun dual, R453, MS4.1, MS853, Alu 753, ESN530, R553, Hobby Electric, R83, MS813, ESN113, R213, R64, MS840, E-TAC, CSN140, ESN114, R214 and EN50 nailer/tackers.
Dowsil™ 785+ is a one-part bacteria resistant silicone that provides strong adhesion to most non-porous surfaces, including ceramics and porcelain. Suitable for use on domestic and commercial sanitary fittings, kitchen sink units and clean rooms. It contains a fungicide to resist mould growth and protects against bacteria growth, MRSA, E. coli and Salmonella. Quick working time of just 5-10 minutes and tack-free in one hour. Joint movement capability ±20% Conforms to ISO 22196:2007 and ISO 11600-F-20LM.Dowsil™ 785+ Silicone Sealant, Jasmine
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.Diameter: 14mm
This Faithfull Transparent Oil Can is manufactured from high strength ABS, allowing a clear view of the contents of the can at a glance. The high pressure trigger action pump is fitted with a flexible spout and a brass nozzle that is ideal for lubricating round corners and in to tight box sections for precise application of the lubricant. It is suitable for use with all kinds of lubricating oil. Specifications:Capacity: 350mlNozzle length: 80mm.
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 250 x 20mm (10 x 3/4 in).
DEFENDER by SQUIRE Aluminium Padlocks with a hardened steel shackle. Comes with a 2 year guarantee.This Keyed Alike DEFENDER Aluminium Padlock 50mm is ideal for sheds, garages and medium to large boxes. Comes complete with 2 keys.
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.The DEWALT DEWDT6516QZ multi material drill bit has the following dimensions:Size: 3.5mm x 80mm.
Using a staple gun shouldn’t be a workout. Rapid ALU Combi Tackers with Powercurve® Technology were developed with a leading physiotherapist for up to 65% less effort. It’s not only easier to squeeze, it also perfectly matches the power of your hand. The patented 3-step force adjuster system lets the user decide for themselves how much power to deploy. Save effort on jobs with short leg lengths and turn up the power with a simple flip of the force adjuster when required. Save energy - Your own.The Rapid ALU953 Combi Tacker is a high quality, ergonomically designed tacker ideal for do-it-yourself work, for example, labels, textiles, canvas and other fibred materials as well as fine wood trim around the house. It has a dual magazine which uses Rapid No. 53 staples 6-14mm and No. 8 brads 15mm. Made in Sweden, it has a strong and light aluminium exterior with an ergonomic design and comfortable soft grip areas and comes covered by a 3 year guarantee.
Sadolin Classic Wood Protection absorbs deeply into the timber to provide exceptional protection against the weather. Effective on large areas of timber such as cladding, fascias, decking and rough sawn timber. It is also ideal as a base stain on new joinery which is to be subsequently treated with Sadolin Extra. Not suitable to use on surfaces previously coated with a medium/high build coating. Specification: Coverage: Planed Softwood/Hardwood up to 15m²/litre; Rough Sawn Timber up to 8m²/litreDrying Time: Touch Dry 4-6 hours; Recoat: 16-24 hoursThis Sadolin Classic Wood Protection has the following specification: Colour: Light OakSize: 2.5 Litre
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 70 mm dia
The Faithfull Roofing Square, also known as a Rafter or Framing Square, is a common favourite for carpenters the world over. It is suitable for many roofing and general woodworking projects. Made from heavy-duty steel with a powder-coated black finish for corrosion protection. Clearly graduated in metric and imperial with conversion charts printed on the reverse. The go to tool when hand cutting a roof. Hips, valleys, bird beaks, plumb cuts and overhang cuts can all be determined using this square. Rises and pitches can also be calculated using the unique conversion chart on the square itself.1 x Faithfull Black Steel Roofing Square 300 x 200mm
Faithfull Plasterers Lights are manufactured using a sturdy tubular steel tripod stand with a strong polycarbonate light housing and diffuser, making them tough and durable for everyday use. The two powerful SMD LED’s strips with a 44W output provide 4,050 lumens of light, making them ideal for all interior and many work site jobs as they produce a cool bright 6400K colour range light without shadowing over a wide area. The lights have two built-in power outlets for in-series linking. The tripod stand and light housing can be folded flat for transportation or space saving storage. These lights are energy efficient, cool running and with the added advantage of being resilient to drops and knocks that would normally break fluorescent tubes used in older models of these lamps, no more replacing worn out or broken tubes. This light is available in 240 or 110 Volt versions both fitted with an approved plug.1 x Faithfull Power Plus LED Plasterers Tripod Light 5ft 110V 4050 Lumens Maximum load applied to the sockets should not exceed 1500W, which allows you to link up to 12 lights.
These DEWALT Classic Rigger Safety Boots with full grain leather uppers and a steel toecap that offers protection of up to 200 joules. The comfort insoles, padded ankle and TPU heel support provide comfortable all day wear. Fitted with a durable, Goodyear welted rubber outsole and a steel midsole for underfoot protection. They also feature a padded cuff for additional comfort. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Classic Rigger Brown Safety Boots UK 7 Euro 41
This Faithfull Plastic Hose Fittings Starter Kit contains the 4 most popular hose fittings and is the ideal starter kit for watering tasks around the home and garden. Suitable for use with all 12.5mm (1/2in) bore hoses and compatible with all other UK water fittings. Kit includes: 1 x Hose Spray Nozzle1 x Dual Tap Connector1 x Water Stop Hose Connector1 x Hose Connector
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502822 Blue Groove 4x flat bit has the following specific dimension:Diameter: 38mm
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.Set of 4 Marples M444 Series Blue Chip Bevel Edge Chisels. Sizes included: 6, 12, 18 & 25mm (1/4, 1/2, 3/4 & 1in).
