The McAlpine M/Fit Blank Cap 1.1/2 T23U" is a plumbing component used to cap or seal off a pipe. The blank cap is designed to fit onto a 1.1/2 inch pipe with a T23U" end, providing a tight and secure seal. The M/Fit blank cap is part of the McAlpine Multifit range, which is designed to provide a versatile and reliable solution for a range of plumbing applications. The blank cap is made from high-quality materials, ensuring durability and long-lasting performance. The cap features a simple, one-piece design that makes installation quick and easy. It can be used to cap off a pipe temporarily or permanently, depending on the requirements of the plumbing system. Overall, the McAlpine M/Fit Blank Cap 1.1/2 T23U" is a reliable and cost-effective solution for sealing off pipes in a range of plumbing applications. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its durability and ease of use. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine M/Fit Blank Cap 1.1/4 S23U" is a plumbing component that is used to cap or seal off a pipe. The blank cap is designed to fit onto a 1.1/4 inch pipe with a S23U" end, providing a tight and secure seal. The M/Fit blank cap is part of the McAlpine Multifit range, which is designed to provide a versatile and reliable solution for a range of plumbing applications. The blank cap is made from high-quality materials, ensuring durability and long-lasting performance. The cap features a simple, one-piece design that makes installation quick and easy. It can be used to cap off a pipe temporarily or permanently, depending on the requirements of the plumbing system. Overall, the McAlpine M/Fit Blank Cap 1.1/4 S23U" is a reliable and cost-effective solution for sealing off pipes in a range of plumbing applications. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its durability and ease of use. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine CLAMP1GR is a pipe clamp that is designed to suit 1¼"/1½" pipes to BS EN 1451-1:2000/BS EN 1329-1:2000 standards. This clamp is used to secure pipes in place and prevent them from moving or shifting during use. The CLAMP1GR is made from high-quality plastic material, which makes it durable and long-lasting. The clamp features a simple, one-piece design that makes installation quick and easy. The clamp is suitable for use with both vertical and horizontal pipes, and can be used in a variety of plumbing applications. The clamp is designed to fit snugly around the pipe, ensuring a secure fit and preventing any movement or vibration. This helps to prevent damage to the pipe and surrounding fittings, and also helps to reduce noise and vibration. The McAlpine CLAMP1GR is a reliable and cost-effective solution for securing 1¼"/1½" pipes in place. It is widely used in both domestic and commercial plumbing applications and is a popular choice among plumbers and builders for its durability and ease of use. The "GR" in the product code may refer to the color of the clamp, which is gray. ・ Available in White or Grey ・ Universal Connections for 19/23mm rigid pipe and 25mm flexible pipe ・ Suits 1¼"/1½" Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000 ・ Receives the discharge from a condensing boiler ・ Conforms to BS 6798:2009 and Building Regulations Approved Document H

Read more less

The McAlpine CLAMP1WH is a pipe clamp designed to suit 1¼"/1½" pipes to BS EN 1451-1:2000/BS EN 1329-1:2000 standards. It is used to secure pipes in place and prevent them from moving or shifting during use. The CLAMP1WH is made from high-quality plastic material that is durable and long-lasting. It features a simple, one-piece design that makes installation quick and easy. The clamp is suitable for use with both vertical and horizontal pipes, and can be used in a variety of plumbing applications. The clamp is designed to fit snugly around the pipe, ensuring a secure fit and preventing any movement or vibration. This helps to prevent damage to the pipe and surrounding fittings, and also helps to reduce noise and vibration. Overall, the McAlpine CLAMP1WH is a reliable and cost-effective solution for securing 1¼"/1½" pipes in place. It is widely used in both domestic and commercial plumbing applications and is a popular choice among plumbers and builders for its durability and ease of use. ・ Available in White or Grey ・ Universal Connections for 19/23mm rigid pipe and 25mm flexible pipe ・ Suits 1¼"/1½" Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000 ・ Receives the discharge from a condensing boiler ・ Conforms to BS 6798:2009 and Building Regulations Approved Document H

Read more less

The McAlpine OBT1-CO is a plumbing component, specifically a multifit outlet offset trap with a 75mm water seal. It is designed for use with appliances such as dishwashers and washing machines, as well as other types of domestic and commercial equipment that discharge waste water. The OBT1-CO features a 19/23mm inlet and outlet, making it compatible with a range of pipe sizes. It has a unique offset design, which allows it to be installed in tight spaces and where there are existing pipework or obstructions. The trap is made from high-quality polypropylene plastic, which is lightweight and durable. The multifit outlet of the OBT1-CO allows it to be connected to a range of pipework, including push-fit and solvent weld systems, making it a versatile option for a variety of plumbing applications. The trap also features a removable, easy-to-clean seal, which helps to prevent blockages and keep the system running smoothly. Overall, the McAlpine OBT1-CO is a reliable and efficient offset trap that is suitable for use in a wide range of plumbing applications. It is a popular choice among plumbers and builders for its versatility, durability, and ease of installation. ・ 19/23mm Inlet and Outlet ・ Trap receives discharge from condensing boiler ・ Supplied with Support Clip ・ Conforms to BS EN 274-1:2002, BS 6798:2009 and Building Regulations Approved Document H

Read more less

The McAlpine ASC10-CO is a sink trap with a 75mm water seal and a 1½" multifit outlet. It features a tubular swivel design that allows for easy installation and adjustment. The trap also includes a 19/23mm pipe connection, which makes it compatible with a variety of plumbing systems. This type of trap is commonly used in sink installations and is designed to prevent odors and gases from entering the room through the drain. The water seal helps to create a barrier that prevents these odors from escaping, while the trap itself captures any debris or solids that may be present in the water flow. ・ 1½" Outlet ・ 75mm Water Seal ・ Multifit Compression Outlet suits all plastic, copper and lead pipe ・ Connection for 19/23mm pipe to receive the discharge from condensing boiler ・ Can accept discharge from a washing or dishwashing machine

Read more less

The McAlpine TUN5-CL Tunvalve is a straight-through valve with clear body construction and 19/23mm universal connections. It is designed to control the flow of water in a plumbing system and is commonly used in applications such as under-basin installations. The clear body allows for easy inspection of the valve and helps to detect any potential blockages or issues. The 19/23mm universal connections make it compatible with a variety of plumbing systems and configurations. ・ This non-return valve may be installed to take the discharge condensate from a boiler, air conditioning unit or cold water cistern when the discharge is being installed into a waste or soil pipe. ・ The non-return valve will prevent foul odour entering the building ・ Must be installed in the vertical position and placed where it is visible for inspection. ・ Not to be used to take the discharge from a Pressure Release Valve (PRV)

Read more less

The McAlpine M/Fit Reducer 1.1/2X1.1/4 St28M is a plumbing fitting used to connect two different sizes of pipes. This reducer is designed for use with plastic pipes and features a push-fit design, which means that it can be easily and quickly installed without the need for special tools or equipment. The 1.1/2X1.1/4 size of this reducer means that it is designed to connect a 1.1/2" pipe to a 1.1/4" pipe. This can be useful in situations where two different sizes of pipes need to be connected, such as when installing a new plumbing system or making repairs to an existing system. The McAlpine M/Fit Reducer 1.1/2X1.1/4 St28M is made from high-quality materials, which ensures its durability and resistance to wear and tear. It is part of McAlpine's M/Fit range of fittings, which are designed to be compatible with plastic pipes. Overall, the McAlpine M/Fit Reducer 1.1/2X1.1/4 St28M is a reliable and efficient plumbing fitting that provides a secure and leak-free connection between two different sizes of plastic pipes. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine M/Fit Swept Tee 1.1/4" V8M is a plumbing fitting used in drainage systems. It is designed for use with plastic pipes and features a push-fit design, which means that it can be easily and quickly installed without the need for special tools or equipment. The Swept Tee design of this fitting features a smooth, sweeping curve that helps to maintain a smooth and efficient flow of water and waste through the drainage system. The 1.1/4" size is suitable for use in smaller pipes and systems. The McAlpine M/Fit Swept Tee 1.1/4" V8M is made from high-quality materials, which ensures its durability and resistance to wear and tear. It is part of McAlpine's M/Fit range of fittings, which are designed to be compatible with plastic pipes. Overall, the McAlpine M/Fit Swept Tee 1.1/4" V8M is a reliable and efficient plumbing fitting that provides a smooth and efficient flow of water and waste through drainage systems. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe

Read more less

The McAlpine M/Fit 45 Deg Bend 2" Mz20 is a plumbing fitting designed for use in drainage systems. It is made from high-quality materials, ensuring its durability and resistance to wear and tear. The fitting features a 45-degree bend, which allows for a smooth and efficient flow of water and waste through the drainage system. The 2" size is suitable for use in larger pipes and systems. The McAlpine M/Fit 45 Deg Bend 2" Mz20 is part of McAlpine's M/Fit range of fittings, which are designed for use with plastic pipes. The M/Fit system is a push-fit system, which means that the fittings can be easily and quickly installed without the need for special tools or equipment. Overall, the McAlpine M/Fit 45 Deg Bend 2" Mz20 is a reliable and efficient plumbing fitting that provides a smooth and efficient flow of water and waste through drainage systems. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications. ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Available in 1¼", 1½", and 2" sizes

Read more less

The McAlpine M/Fit 45 Deg Bend 1.1/2" Mt20 is a plumbing fitting designed for use in drainage systems. It is made from high-quality materials, ensuring its durability and resistance to wear and tear. The fitting features a 45-degree bend, which allows for a smooth and efficient flow of water and waste through the drainage system. The 1.1/2" size is suitable for use in medium-sized pipes and systems. The McAlpine M/Fit 45 Deg Bend 1.1/2" Mt20 is part of McAlpine's M/Fit range of fittings, which are designed for use with plastic pipes. The M/Fit system is a push-fit system, which means that the fittings can be easily and quickly installed without the need for special tools or equipment. Overall, the McAlpine M/Fit 45 Deg Bend 1.1/2" Mt20 is a reliable and efficient plumbing fitting that provides a smooth and efficient flow of water and waste through drainage systems. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications. ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Available in 1¼", 1½", and 2" sizes

Read more less

The McAlpine M/Fit 45 Deg Bend 1.1/4" Ms20 is a plumbing component that is used to change the direction of a 1.1/4" waste pipe at a 45 degree angle. It is designed to be used in conjunction with other McAlpine M/Fit fittings to create a complete waste pipe system. The fitting is made from high-quality polypropylene plastic, which is lightweight and durable. It has a push-fit design that allows for easy and quick installation, and the fitting can be easily removed and reused if necessary. The McAlpine M/Fit 45 Deg Bend 1.1/4" Ms20 is suitable for use in both domestic and commercial plumbing applications, and it conforms to all relevant standards and regulations. It is a reliable and cost-effective solution for changing the direction of a waste pipe at a 45 degree angle. ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Available in 1¼", 1½", and 2" sizes

Read more less