This threaded rod cutter provides a clean, waste, noise and spark-free cut which can be bolted immediately. It can also be used to straighten damaged threaded rods. Integral 545mm adjustable rulerNo fire permit is necessary for use in critical areasM7 rod (7mm diameter) 150 thread, to be cut on 10mm diameter slot - for heating, ventilation, air-conditioning and sanitary engineers. Will cut 6, 8 and 10mm rods Up to 6.6 soft steel: 60kg/mm²Will not cut stainless steel rods
Faithfull Power Plus LED Energy Saving Light Bulb with an E27 fitting (Large Edison). Energy rated at A++ this 10W bulb produces a bright white 800 lumen output and is more energy efficient than a conventional filament GLS bulb or compact florescent light bulb. This dual voltage bulb can be used in both 110V and 240V fittings and is suitable for both industrial and domestic application were a bright white, non-dimmable light is required. Power: 10WOutput: 800 Lumens Colour Range: 6500 Kelvin Bright WhiteEnergy rating: A++Cap fitting: E27 screwLED lifetime: 50,000 hoursVoltage: 110-240V10W is equivalent to a standard 60W filament bulb, giving an approximate 83% energy saving compared to conventional GLS bulbs.All outputs quoted are approximate.For use with the following Faithfull Power industrial lighting products:FPPSLFESTOONFPPSLFESTLEDFPPSLGRIPLEFPPSLLAMP
This Pack of Gripit Blue Plasterboard Fixings contains: 100 x Gripit Blue Fixings100 x Bolts M8 x 30mm Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip. Gripit Blue Fixings allow you to fix the heaviest of domestic heating boilers, TVs and kitchen cabinets to plasterboard walls. One Gripit Blue holds up to 113kg. Easy to install, you will require a 25mm drill bit. They are also removable and reusable. Each Gripit Blue is supplied with an M8 x 30mm bolt.
Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.These Forgefix TechFast Roofing Sheet to Steel Screws have the following specification: Size: 5.5 x 57mmEffective Thread Length: 43mmHead Type: 8mm HexPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
ForgeFix TechFast Cover Caps are specifically designed for use with TechFast Screws with an 8mm Hex head, 16mm or 19mm washers. Offers a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.These ForgeFix TechFast Cover Caps are suitable for self-drill screws with 16mm washers and an 8mm hex head. They come in the following: Colour: Poppy RedSize: 16mmPack Qty: 100
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 17mm Box 200
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Specifications: Size: 4 x 70mm.Box quantity: 200.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.0 x 25mm.Box quantity: 200.
The Weller Brass Wire Sponge Cleaner allows you to clean and remove residual solder from your soldering iron tips without water. Simple to use, plunge the iron tip into the brass coils. Cleaning your iron tips helps to prevent rust and extend life. Comes with a slip-resistant, silicone holder.
The RIDGID 1390M Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. It makes clean cuts without damaging the thread.RIDGID 1390M Threaded Rod Cutter Blade Size: 10mm.
Everbuild Waterproofing Rapid Setting Cement is ideal for use on concrete, stone and brick. Ideal for repairs to cracks and holes in water tanks, ponds,swimming pools, bedding sanitary ware. Also for seals and joints, drains and pipes.
Thompson's 10 Year Roof Seal is a high performance coating which cures to form a durable, flexible membrane suitable for resealing and protecting whole roofs or repairing large areas of damage to a variety of roofing materials. The 10 year formulation is designed to flex with the natural movement of the roof protecting the membrane from cracking and splitting over time. UV light stable iron oxide pigments provide a protective shield against harmful UV radiation ensuring 10 year weatherproofing performance under extreme conditions. For best results the advanced formula should be applied directly to dry surfaces, the 10 year formulation forms a vapour permeable membrane that repairs and weatherproofs whilst allowing any trapped moisture in the substrate to escape. This product is supplied in a tin with re-sealable lid and the following specifications:Colour: Black.Available Sizes: 1L, 2.5L or 4L.1 x Thompson's Roof Seal Black 4 Litre
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 1.1/2 x 8 Box 200
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 60 mm.Box quantity: 100.
The Shurtape T-REX® Tape is a ferociously strong tape! It gets its famous bite from co-extrusion technology, designed to prevent de-lamination of the tape. With an all weather skin, T-REX® Tape holds longer and sticks stronger than ordinary tapes, perfect for long lasting outdoor applications. It is double the thickness of standard duct tapes, making it extremely strong, yet can still be easily torn by hand. It uses a thick, aggressive adhesive that can stick to rough, dirty surfaces allowing you to get the job done right the first time. T-REX® Tape has a UV resistant layer built in to its tough skin, giving it long lasting durability and staying power to last through all types of weathers and temperatures. It is made for projects that need intense holding power, ideal for taping up rough fabrics, bundling large or heavy materials, and making long lasting repairs that ordinary tapes just can’t handle.Specification Width: 25mm.Length: 9.1m.Colour: Graphite Grey.
The new best ever Ultimate Cloth Duck® Tape is triple layered for use everywhere. Four toughened fabric layers are fused together to create a truly amazing heavy-duty Duck Cloth Tape which is perfect for 1000s of uses both regular and extreme. And its still the easy tear formula that really does mean no scissors. The unique adhesive is 50% stronger than most other cloth tapes, sticking to most surfaces with ease. For use both indoors and outdoors, and just like a real duck its 100% waterproof. Perfect for temporary repairs to your bike - and it can even secure a broken car bumper until you get to the garage! Not suitable for total immersion in water.50mm (2 in) wide x 25m roll. White.
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: BlackWidth: 50mm (2in)Length: 50m
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: BlackWidth: 50mm (2in)Length: 25m
The Shurtape Original Cloth Duck Tape® is ideal for fixing, binding, repairing, protecting, identifying and reinforcing tasks. It is strong, waterproof, tears easily and is for use both indoors and out. Ideal for hundreds of uses around the home, garage and garden with high strength adhesive - sticks firmly to most surfaces. Not suitable for total immersion in water.This Duck Tape® Original comes in the following: Colour: BlackWidth: 50mm (2in)Length: 50mPack Size: 2
